}

Tender For Mgnregs Material Supply => Limited, Palakkad-Kerala

Tender Notice

51663963
Corrigendum : Tender For Mgnregs Material Supply => Limited
Tender
Indian
Kerala
Palakkad
03-11-2025

Tender Details

tender for Mgnregs Material Supply => Limited-MGNREGS Material supply 2 Stone for masonry work 3 Carriage of Soling stone & masonry stonee 4 Through and bond stone size 24 x 24 x 39cm 5 Portland Cement 6 Cement 7 Coarse sand (zone III) 8 Coarse sand 9 Sundries 10 Solid blocks of size 30x20x15cm 11 Royalty for good earth 12 Carriage of Good earth 13 laterate stone of size 40x20x15cm 14 Structural steel such as tees, angles, channels and R.S. joists 15 Steel 16 Red oxide Zinc chromate primer 17 Carriage 18 Adjustable telescopic prop 3 m (2.02-3.75m) 19 Beam clamp 300-380 mm (450-1070 mm) 20 Adjustable span ESO+SI (2.35-3.40) 21 Wall form panel 1250x450xmm 22 Corner angle 45x45x5 mm 2.50 long 23 Column clamp 450x1070 mm 24 Prop 2 m (2-3.5m) 25 Twisted steel/deformed bars 26 Carriage of Steel 27 Second class kail wood in planks 28 Second class kail wood in scantling 29 Carriage of Timber 30 Hollock ballies 125 mm diameter 31 Stone Aggregate(single size):20 mm nominal size 32 Stone Aggregate(single size): 10 mm nominal size 33 Carriage of Stone aggregate below 40 mm nominal size 34 Carriage of Coarse sand 35 Carriage of Cement 36 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper 37 Vibrator (Needle type 40 mm) 38 Stone Aggregate(single size): 40 mm nominal size 39 Carriage of Stone aggregate 40 mm nominal size and above 40 Mild steel tubes hot finished welded type 41 Welding by electric plant 42 Synthetic enamel paint in black or chocolate shade 43 Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile 44 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) 45 Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm 46 Bright finished or black enameled mild steel screws 40 mm 47 Bright finished or black enameled mild steel screws 20 mm 48 Flats up to 10 mm in thickness 49 Mild steel round bar 12 mm dia and below 50 Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) 51 Anodised Aluminium handles 125 mm with plate 175 x 32 mm 52 Chromium plated Brass screws 25 mm 53 200 mm Aluminium aldrop 54 Brass 100 mm mortice latch and lock with 6 levers without pair of handles 55 Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock 56 Carriage and sundries 57 Fine sand (zone IV) 58 Fine sand (1 part badarpur sand : 2 parts jamuna sand 59 Deharadun white lime 60 Vitrified floor tile 60x60 cm 61 Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement 62 Black colour dark shade pigment 63 Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black 64 Vitreous China orrisa type w.c. pan size 580 mm 65 Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) 66 100 mm S.C.I. trap with vent heel 67 Vitreous China flat back wash basin 630x450 mm 68 15 mm C.P.brass tap 69 C.P. brass waste 32 mm 70 C.I. bracket for wash basin and sinks 71 Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm 72 Rectangular shape 453x357 mm Mirror with Plastic moulded frame 73 Hard board 6 mm thick 74 Rawl plug 50 mm (designation 10 nos) 75 PVC pipe 25 mm outer dia. 10kgf cm2 76 Stone aggregate below 40 mm nominal size 77 PVC pipe 50 mm outer dia.6kgf/cm2 78 PVC pipe 110 mm outer dia 6kgf/cm2 79 PVC Elbow 63 mm dia 80 PVC door Elbow 63 mm dia 81 PVC bend 63 mm dia 82 PVC Elbow 110 mm dia 83 PVC door Elbow 110 mm dia 84 PVC bend 110 mm dia 85 Polyethylene water storage tank with cover and suitable locking arrangemnet 86 Acrylic exterior paint 87 Exterior primer 88 Black Japan 89 Quarry Waste 90 Stone Aggregate(single size): 06 mm nominal size 91 Interlocking C.C. paver block (60 mm thick, M-30)

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 21-10-2025 extension Date 03-11-2025

Key Value

Document Fees
INR 2950 /-
Tender Value
INR 17.82 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail