Tender For Shifting Of Existing 11Kv Over Head Network Over The Plot Inside The Sector- 29 Yea (Wc-Em-02) - Supply & erection of Steel tubular pole with 1/6 over all length of pole grouted with cement concrete in 1:3:6 (1 cement : 3 coarse sand : 6 stone ballast) including plinthing of pole 30 cm above the ground level, plastering of plinth including excavation back filling etc. The rates includes all materials labour & T&P. etc. required for proper completion of work as per direction of E/I. YEIDA SOR-24410 SP-55, 11Mtr (Approx wt 232kg) 2 Supply and erection of 8.5 M. long P.C.C. pole, confirming to IS 1678-1960, IS 343-1960 and IS 456-1964 grouted with 1:4:8 cement concrete (1 cment, 4 fine sand : 8 over burnt brick ballast of 40 mm nominal size) including the plinthing of pole. Complete with all material, labou, T&P etc. and also including cartage of pole from store to site of works.complete in all respect, as directed by Engineer in charge YEIDA SOR-33 3 S/E of Section Double pole structure on ST pole 410 SP-55 with 1/6 over length of poles grouted with cement concrete in 1:3:6 (one cement : 3 coarse sand :6 Stone ballast) including plingthingof pole 30 cm above grade level, plastering of plinth including excavation & back filling etc. The double pole structure consist of 100X50X6mm 2.50 mtr. & 75X40X6mm 2.50 mtr. M.S. channel and bracings with M.S. clamp packing piece Nuts Bolts etc. The rates includes all materials labour T&P etc. required for proper completion f work as per direction of E/I. YEIDA SOR-25 4 S/E of Four pole Structure on S.T. Pole 410 SP-55 with 1/6 over all length of poles grouted in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 stone ballast) concrete plinthing of pole 30 cm above ground level plastering of plinth, including excavation & back filling etc. The four pole structure consist of four nos. 100X50X6 mm size & four Nos. 75X40X6 mm size & 2.50mtr. long cross arms and 4 Nos. bracings complete with M.S. clamps, backing pieces, Nut bolt etc. The rates includes all material labour T&P etc. required for proper completion of work as per direction. YEIDA SOR-26 5 S/F of 0.3mtr. long top channel for pin made of 100X50X6 mm M.S. channel with M.S. clamp packing box nut bolt etc. complete in all respect, as directed by Engineer in charge YEIDA SOR-32 6 S/F of cross arm made of 100X50X6 mm M.S. channel 1.15 mtr. long with M.S. clamp packing piece Nut bolts etc. complete in all respect, as directed by Engineer in charge YEIDA SOR-31 7 S/F of 11 KV Polymeric pin insulator with pin on poles or anywhere specified including bolts to fasten on pole cap/cross arm with the poles.(Jaishree, BHEL,RR, Hindustan, Yamuna, AD, make) Complete in all respect, as directed by Engineer in charge. YEIDA SOR-78 8 S/F of 11KV Polymeric Disc with Gun fittings on cross arms/clamps fixed on poles including all Nut, bolts & washer etc. (Jaishree, BHEL,RR, Hindustan, Yamuna, AD, make) Complete in all respect, as directed by Engineer in charge. YEIDA SOR-79 9 S/F of PG clamp for 3 bolt size 3X5/2 bolt connected Dog to Dog ACSR conductor on pole (Jaishree, BHEL,RR, Hindustan, Yamuna, AD, make) Complete in all respect, as directed by Engineer in charge. YEIDA SOR-77 10 S/F of cross arm made of 100X50X6 mm M.S. channel 2.5 mtr. long on poles with packing, piece, M.S. clamp, Nut bolts etc. complete in all respect, as directed by Engineer in charge YEIDA SOR-30 11 Supply, Sagging, tensioning, jointing and bending of suitable size ACSR conductor conferming to I.S. specification including cost of aluminium wire and jointing sleeve required. The rates includes cost of material, labour, T&P etc. required for proper completion of work as per the directions of the Engineer-in-charge. PWD-2018 P.S.-627Dogconductor. 12 S/F ofoverhead line with G.I wire no. 8 to 4 SWG on Poles service bracket including binding etc. complete in all respect.as per the directions of the Engineer-in-charge. PWD-2018 P.S.- 628 13 S/E of ‘D’ clamps 50X6mm. flat iron on steel tubular pole / steel rail pole with bolts, nuts etc. complete in all respect including with aluminium paint.as per the directions of the Engineer-in-charge. PWD-2018 P.S.-623 14 S/E of stay set at least 3.5 mtr away from the pole complete with galvanized 19mm dia x 1.800 mtr long stay rod. 30cmx30cmx6.3mm anchor plate thimble stay clamps, stay insulator 19mmx600mm double screw tightener. 7/4.00 mm G.I. stay wire etc.in 1:3:6 cement concrete in all respect.as per the directions of the Engineer-in-charge. PWD-2018 P.S.- 630. 15 Painting of the electric pole with two coat of Al-paint over red oxide primer complete in all respect as per the directions of the Engineer-in-charge. PWD-2018 P.S.-634 16 Supply & fixing of MS rod for earthing with 2.5 m long, solid, 20 mm dia hot dipped galvanised MS rod buried till the top reaches 1.7 mts. Below the GL complete with bolts & nuts & GI earth wire 7/14. Complete in all respects as per direction of the Engineer-in-charge. YEIDA SOR-52 17 S/F of G.I Pipe 150MM dia Bclass Zindal/tata make including required material T&P etc. Complete in all respect, as directed by Engineer in charge. as per the directions of the Engineer-in-charge. YEIDA SOR-65 18 S/L of 160mm dia. H.D.P.E pipe for drawing of power cable across the road by drilling of 200mm dia. at 1mtr. below the road level thereby doing the work of providing H.D.P.E pipe by Trenchless method PE-63/PN-6 .as per the directions of the Engineer-in-charge.YEIDA SOR-81 19 Supply, delivery, laying, testing & commissioning of 11KV (E) XLPE cable having compact circular stranded aluminium conductor the conductor should have screening of extruded semi conducting compound, cross linked polythylene (XLPE), insulation screening of the extruded semi conducting compound followed by copper tape, cores laid up, taped PVC inner sheath, single layer of steel strip armouring, overall PVC outer sheath conforming to IS: 7098 (Part-amendments) for following mentioned sizes. It should be operational at 11 KV, 50 Hz. AC system in ground at a depth of 1200 mm below ground level over a cushion of 75 mm thick sand all-round and protected with bricks on sides and at the top surface. The cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I. with Complete in all respect. The price are inclusive of all earth work such as digging, back filling, supply & spreading of good earth all around the cable, supply & providing cable identification markers. The installation should be complete in all respect and as per requirement of the job under the direction of Engineer-in-charge. Make- CCI, Gloster, Asian, Universal, Nicco, ICL, Diamond, Havells & KEI. YEIDA SOR-23CX300 Sqmm. 20 Supply, Installation, Testing & Commissioning of 11 KV Out door type cable termination kit of 3 core cable with cable termination at the panel & transformer complete in all respect as required for proper completion of work as per direction of Engineer-in-charge.(Make Raychem/C.C.I./Frontec) YEIDA SOR-5 3CX300 Sq.mm. 21 Supply, Installation, Testing & Commissioning of 11 KV Straight through cable jointing kit of 3 core cable with cable jointing. Complete in all respect as required for proper completion of work as per direction of Engineer-in-charge. (Make Raychem/C.C.I./ Frontec ) YEIDA SOR-6 3CX300 Sq.mm. 22 Supply & fixing of Cable route marker including Painting & Writing Complete in all respects as per direction of the Engineer-in-charge. YEIDA SOR-55.
