}

Tender For Reconstruction Work Of Damaged/Narrow Culvert Located At Km 2 Of Roopwas Link Road - Excavation For Roadwork In Soil With Hydraulic Excavator Of0.9 Cum Bucket Capacity Including Cutting And Loading In Tippers, Trimming Bottom And Side Slopes, I, bulandshahr-Uttar Pradesh

Tender Notice

51662540
Corrigendum : Tender For Reconstruction Work Of Damaged/Narrow Culvert Located At Km 2 Of Roopwas Link Road - Excavation For Roadwork In Soil With Hydraulic Excavator Of0.9 Cum Bucket Capacity Including Cutting And Loading In Tippers, Trimming Bottom And Side Slopes, I
Tender
Indian
Uttar Pradesh
Bulandshahr
25-10-2025

Tender Details

Tender For Reconstruction Work Of Damaged/Narrow Culvert Located At Km 2 Of Roopwas Link Road - Excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 2 Providing concrete for M-15 plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 3 Sand Fillling in foundation trenches as per drawing and technical specification Clause 305.3.9 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 4 RCC M25 Providing concrete for Plain/Reinforced cement concrete in super structure complete as per drawing and technical specifications Clauses 802, 803, 1202 & 1203Sr. No. 13.1 Ref. No. 800 (M-25) Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 5 Supplying, fitting and placing with MS bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 including bending for proper and necessary completion of the work and including supply of steel and wastages, bends, hooks and authorised overlapping shall be measurised as per direction of Engineer-in-charge. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 6 Providing and laying cement concrete wearing course M 30 grade including reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 7 Providing & Fixing of Weep Hole in Abutment wall & retaining wall with 100 mm dia PVC pipe (6.0 Kg/Sqm pressur), extending thtough the full width of the structure with slop of 1V: 20H towords drawing face. Complete as per drawing and specifications. Sr No. 12.9 Ref No. 1200 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 8 Backfilling behind the abutment wall and return wall complete as per drawing and technical specification Clause 1204.3.8 Sr No. 12.10 Ref No. 1200Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 9 Drainage spouts complete as per drawing and technical specifications Clause 1209 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 10 Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres As per Clause 202 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 11 Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 12 Laying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with threewheel road roller 80-100 kN as per Technical Specification Clause 412 (4.18) Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 13 Supply and fixing of 1000 mm dia NP3 type Hume Pipe S&S in position including labour and T&P etc. required for proper completion of work. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 14 Empty Cement Bags of good condition (Plastic) filled with Carted Earth including filling, stiching and stacking at side of filling SI No 10.50 A. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 15 Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 16 Providing, laying, spreading and compacting stone aggregates of 45-63 mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 17 Providing, laying, spreading and compacting stone aggregates of 22.4-53 mm sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 18 Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 19 Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 20 Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST. 21 Providing and laying seal coat by manual means with VG-10 Grade Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 Including cost of all material, labour, T&P, all taxes and labour cess complete. But excluding GST.

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 14-10-2025 Date corrigendum Date 25-10-2025

Key Value

Document Fees
INR 944 /-
EMD
INR 266000.0 /-
Tender Value
INR 26.60 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail