Bids Are Invited For Dual Duty V Pulley W-Tapr Lock 450Mm Pcd, 6Gr With Taper Lock Bush 4040 Pilot Bore. Pulleys Have To Be Certified For Dynamic Balancing , Dual Duty V Pulley W-Tapr Lock 400Mm Pcd, 6Gr With Taper Lock Bush 4040 Pilot Bore. Pulleys Have To Be Certified For Dynamic Balancing , Dual Duty V Pulley 280-4-C With Taper Lock Bush 3535 Pilot Bore. Pulleys Have To Be Certified For Dynamic Balancing. , Dual Duty V-Pulley 335-4-C With Taper Lock Bush 3535 Pilot Bore. Pulleys Have To Be Certified For Dynamic Balancing. , C-71 V Belt, V-Belt Should Be Of Pix-Fenner-Skf-Poly F Plus Only, Fenner Eco - Drive Is Not Acceptable, , C-100 V Belt. Note - V-Belt Matched Set Of 4 Nos, V-Belt Should Be Of Pix-Fenner-Skf-Poly F Plus Only, Fenner Eco - Drive Is Not Acceptable, , V-Belt C-3210-C-124. Note- Matched Set Of 4 Nos, V-Belt Should Be Of Pix-Fenner-Skf-Poly F Plus Only, Fenner Eco - Drive Is Not Acceptable, , Xpb-3350 Cogged V Belt, V-Belt Should Be Of Pix-Fenner-Skf-Poly F Plus Only, Fenner Eco - Drive Is Not Acceptable, , B-46 V Belt. Must Be Matched Set Of 2 Nos, V-Belt Should Be Of Pix-Fenner-Skf-Poly F Plus Only, Fenner Eco - Drive Is Not Acceptable, , B-75 V Belt, V-Belt Should Be Of Pix-Fenner-Skf-Poly F Plus Only, Fenner Eco - Drive Is Not Acceptable, , C-110 V Belt. Must Be Matched Set Of 03Nos, V-Belt Should Be Of Pix-Fenner-Skf-Poly F Plus Only, Fenner Eco - Drive Is Not Acceptable, , V-Belt Spb 1900. Note- Matched Set Of 4 Nos, V-Belt Should Be Of Pix-Fenner-Skf-Poly F Plus Only, Fenner Eco - Drive Is Not Acceptable, , Size- Spb-1500, V-Belt Should Be Of Pix-Fenner-Skf-Poly F Plus Only, Fenner Eco - Drive Is Not Acceptable, , Dual Duty V-Pulley - 14 Inch Pcd-10-8V Grooves- 10, Tlb- 5050, Bore Type- Pilo,T Pulleys Have To Be Certified For Dynamic Balancing , Dual Duty V-Pulley - 16 Inch Pcd-10-8V Grooves- 10, Tlb- 5050, Bore Type- Pilot, Pulleys Have To Be Certified For Dynamic Balancing , Dual Duty V-Pulley - 265-4-C Grooves- 4, Tlb- 3535, Bore Type- Pilot, Pulleys Have To Be Certified For Dynamic Balancing , Dual Duty V-Pulley - 236-3-C Grooves- 3, Tlb- 3020, Bore Type- Pilot, Pulleys Have To Be Certified For Dynamic Balancing , Dual Duty V-Pulley - 280-3-C Grooves- 3, Tlb- 3535, Bore Type- Pilot, Pulleys Have To Be Certified For Dynamic Balancing , B-67 V Belt, V-Belt Should Be Of Pix-Fenner-Skf-Poly F Plus Only, Fenner Eco - Drive Is Not Acceptable, , A-40 V Belt, V-Belt Should Be Of Pix-Fenner-Skf-Poly F Plus Only, Fenner Eco - Drive Is Not Acceptable, , Dual Duty V-Pulley 8V, 8Gr,16 Inch Od J Hub With J Bush 100Mm Bore, Tlb- 5050, Pulleys Have To Be Certified For Dynamic Balancing , Dual Duty V-Pulley Spc 560, 6 Groove Tlb- 5050, Bore Type- Pilot, Pulleys Have To Be Certified For Dynamic Balancing , A-58 V Belt, V-Belt Should Be Of Pix-Fenner-Skf-Poly F Plus Only, Fenner Eco - Drive Is Not Acceptable, , C-108 V Belt, V-Belt Should Be Of Pix-Fenner-Skf-Poly F Plus Only, Fenner Eco - Drive Is Not Acceptable, , C-130 V Belt, V-Belt Should Be Of Pix-Fenner-Skf-Poly F Plus Only, Fenner Eco - Drive Is Not Acceptable, , V-Belt Cx-96 ,Cogged Belt, Note- Matched Set Of 6 Nos, V-Belt Should Be Of Pix-Fenner-Skf-Poly F Plus Only, Fenner Eco - Drive Is Not Acceptable, Total Quantity : 196
