Renovation As Per Requirement And Related Electrical Works In Various Gardens Under A Zone Office (2025-26)-Providing and erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 2.5 to 16 sq mm., with necessary material as per specification No. CB-JT/LT Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing and recording the results as per specification no. EA-EP Supplying and erecting mains with WP 2 x 4 sq. mm. 1100 V grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. Supplying and erecting mains with WP 2 x 6 sq. mm. 1100 V. grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands and lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying and laying including excavation of suitable width and depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. Repairing of 120W LED Street Light fi ng with replacing of electronic type Driver 120 w for Outdoor LED Fi ngs with 1 year Warranty. Repairing of 100W LED Street Light fi ng with replacing of electronic type Driver 100 w for Outdoor LED Fi ngs with 1 year Warranty. Repairing of 100W LED Street Light fi ng with replacing of compa ble MCPCB with LED lumens of minimum 150 lumens/wa , CRI 75 and white light 4500-5700K with 1 year Warranty of MCPCB.(With Proper lens and Suitable For all makes) Dismantling the existing W.T. fluorescent Fitting S.V./M.V./M.H. lamp/ LED fitting from pole with bracket complete. Dismantling the existing pole up to 6 m height with brackets, clamps, insulators, stay from the c.c. foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level. Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as perdesign complete (for 3 to 5m octagonal / conical GI pole). Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supply of decorative post top pole 4 Mtrs long made from MS pipe of grade IS1239. The bottom section of pole shall be 139.7mmx4.50mm x 1000mm, and top shall be 76. 1mm x 3.25mm x 3000 mm. The pole shall have base plate of 250x250x10mm. Bottom and top pipe of the pole shall be provided with cast iron emblishment to add asthetics on the pole with the help of grub screw. The pole shall have weather proof inbuilt junction box with flush door and locking arrangements. Junction box shall be provided with 6Amp MCB, Backlit sheet and heavy duty connector. The pole shall be provided with suitable earthing arrangements. The pole shall be provided with 4Nos foundation bolts of M16x600mm with washer and nuts. The body of the pole shall be polished throughly to give smooth surface and pre treated and painted with epoxy primer and finished with UV Ray resistant PU paint in approved colour shade. SITC of Post Top Luminarie LED 3000K,<(>,<)> 240Vac CRI >80 Input power : 45W Dimension : 445 x 741 mm Light Distribu on 360° Electronic driver ON/OFF CE and BIS LUMINAIRE TYPE Light Column. IP ra ng IP65 MATERIAL CHARACTERISTICS Die cast aluminium top cover 445 mm, die cast aluminium decora ve knob on top, Gravity die cast aluminium (LM6 Grade) suppor ng arm integrated with die-cast aluminium base (LM6 Grade) suitable for moun ng Ø60mm OD pipe. SS fasteners. Pure polyester powder coated process : Acid treatment and pure polyester powder coa ng. LIGHTING PERFORMANCE Translucent acrylic diffuser of 2.7mm thickness with controlled downward light emission. Lamp fixed posi on. This luminaire contains built-in LED modules. LED modules are engineered accordingly to the exis ng regula ons of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire > 60,000 hours at 40°C. Opera ng ambient temperature range is from -15°C to +50°C. Driver efficiency >85%, power factor >0.9, Cut off Range 440v,THD <(><<)>10%, Internal Surge protec on 6KV.External Surge Protec on 10KV. ( With 5 Years Warantee ) Opera ng Tempreture -15 Degree Tp +50 Degree and L ED Lumens 150 Lumens/Wa Supplying and installing street light feeder pillar as switching point, as per approved drawing, made from 14 SWG MS sheet of size 1.2x0.9x0.45 mtr with slanted Roof and minimum 2 Louvers on side walls, Front Single Door ( Flush / surface finish type) hinged (3 Nos) from inside with Double folded 14 SWG MS Sheet with rubber gasket on the touching face of edge. The Feeder Piller shall consist of following accessories and provisions, wired up with 16 sq.mm Copper stranded single core PVC insulated wire forpower wiring and 1.5 sq.mm single core PVC insulated copper wire for control wiring. Earthing connection stud provision on both side faces. complete as per specification. 1) 3 Nos. --- Single pole contactors 40 amp capacity of approved make, 2) 1 No. ---- digital time switch of LT/GIC or similar type as ASTRO Mini with min 1 NO contact of 7 Amp, 230 V capacity, 3) 1 No ---- MCB Version 3 pole Isolator switch 500 V 63 amp.capacity, 4) 1 No --- .Alluminium busbar of 25x4 mm, 0.3 mtr long resting on 2 nos. porcelain panel insulator/Busbar supports for Neutral Connection. 5) 1 No ---- 3 pin 6 Amp Plug socket and switch combined unit, 6) No --- Point wiring for Lamp point, with angle holder and switch on board, 7) 3 Nos. ---- 100 Amps Kit-kat Fuse annealed Copper Contacts for incoming supply. 8) 6 Nos --- 32 Amps single pole MCB mounted on D-rail for outgoing circuits. 9) 2 Nos --- Self locking arrangements with keys. 10) 2 Nos --- Earthing connection studs on both side wall minimum of M8 nut bolt. All above accessories are to be installed on Commercial Plywood of 19 mm Thick Having size1.0 x 0.8 m resting on 6 nos of supports welded on MS Sheet. Sufficient space/provision for installation of MSEDCL power Meter shall be kept. The feedar Piller shall be installed on MS Angle/iron frame fabricated from IS-MC-75- 50X50X5 mm Angle having size 0.9 (B) x 0.45 (W) x 1.2 (H) Mtr with holepass angles etc. Additional MS Sheet of size 0.9x0.45 mtr shall be welded at front and back of frame to hide the cable entries. The frame shall be grouted in earth with necessary Cement Concrete Filling including excavation in all type of strata. The MS Sheet and MS angle iron frame shall be completely painted from inside and outside with one coat of red oxide and 2 coats of ivory/red enamelled paints. The coat of bituminous paint shall be applied for portion of frame grouted in earth. The Danger Board shall be revetted at front door.(RA Item 28-4-1 (18-19) SITC of Flexible strip light with 5m meter length, Protection Rating: IP20, Power consumption: 15W/m, CCT: 5000K, (as per the design approval) Beam Angle: 120°, Power Input: DC 12V/24V with external driver, Surge Protection: Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement), Fixture will be suitable to operate in temperature range of 0°C to 50°C LED life time should be at least 50 ,000 burning hours at L.70 at 25 degree centigrade. Luminaire is inclusive of driver and Integral male/female connectors with structures in pre wired conditions as per IS standard. LED Makes should be CREE, LumilLED, Osram, Seoul, Epistar, Nichia or equivalent. with 5 Years of onsite warantee. SITC of BIS registered LED blue color architectural spot lighting luminaire for facade lighting with Die-cast aluminium housing, powder-coated finish. Luminaire offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Wattage should be 9W(±5%). Surge Protection 2 KV-4 KV.Fixture should have constant locking hinges for simple position control from various angles without special tools. Fixture shall be suitable to operate at an ambient temperature range of -10°C to 50°C and complete luminaireshall be IP66 and IK08 rated. LED Life time shall be at least 50,000 burning hours at 50°C. LED should be of make Nichea, Osram, Cree, Lumiled. Luminaire shall be complete with integrated IP 66/67 potted driver and capable of operating at line voltage fro m 100-240 Vac, 50Hz with power factor > 0.9. The product should be BIS approved with R number mentioned on product label. Fixture should have power cable of minimum 600mm length. To be supported with Product test reports BIS, CE ROHS should he submited. IP66, IK08. LM79 and LM80 reports form NABL Accredited laboratory should submited priorto the supply of material. The Fitting includes all inbuilt accessories, connectors, wire etc. complete in all respect with 5 Years of onsite warantee. SITC of 50W LED RGBWW having BIS standard IS 10322 (Part 5/Sec 1): 2012 and having CE certification against standard Low Voltage Directive and Protective Equipment - EN 60598-1:2015, and Electromagnetic Compatibility Directive - EN 61547: 2009. BISregi stered LED RGBWW architectural wash lighting luminaire for facade lighting with Die-cast aluminium housing, powder-coated finish, embossed manufacturer logo, Seperate compartment for keeping the decoder/driver in the housing. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. Power input of wattage 50W(±5%). Hot spot and light distribution Optics Designed to minimize hot spots and fringing in color mixing applications. Surge Protection 2 KV - 4 KV Additional if required will be added as per the requirement). Luminaire offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have constant locking hinges for simple position control from various angles without special tools. Toughened transparent glass having the IK protection up to IK05, Painting : Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture shall be suitable to operate at an ambient temperature range of -10°C to 50°C and complete luminaire shall be IP66 and IK08 rated. LED Life time shall be at least 50,000 burning hours at 50°C. ED should be of make Nichea, Osram, Cree, Lu miled. DMX enabler circuit should be inside the Luminaire only Luminaire shall be with remote driver with output voltage 24V DC.The product should be BIS approved with number mentioned on product label. Fixture should have power cable of minimum 600mm length and signal loop in-out cable of minimum 600mm with IP68 male-female connectors.To be supported with Product test reports BIS, CE RoHS should be submited. IP66, IK08, LM79 and LM80 reports form NABL Accredited laboratory should submited priorto the supply of material. The Fitting includes all inbuilt accessories, connectors, wire etc. complete in all respect with 5 Years of onsite warantee. Repairing of 60W LED Street Light fiti ng with replacing of electronic type Driver 60 w for Outdoor LED Fi ngs with 1 year Warranty. Repairing of 135W LED Street Light fiting with replacing of compa ble MCPCB with LED lumens of minimum 150 lumens/wa , CRI 75 and white light 4500-5700K with 1 year Warranty of MCPCB.(With Proper lens and Suitable For all makes) Repairing of 60W LED Street Light fi ng with replacing of compa ble MCPCB with LED lumens of minimum 150 lumens/wa , CRI 75 and white light 4500-5700K with 1 year Warranty of MCPCB.(With Proper lens and Suitable For all makes)
