Tender For Zone-3, Tajganj, Room No. 77, From The Gate Of Rashmi Vihar Colony To Shamsabad Road, From Old Mandi Square To Tonga Stand In Room No. 98, Patch Repair Work Using Hotmix Near Fezane Madina Mosque In Nagla Mewati In Room No. 59. - Providing And , agra-Uttar Pradesh

Zone-3, Tajganj, Room No. 77, From The Gate Of Rashmi Vihar Colony To Shamsabad Road, From Old Mandi Square To Tonga Stand In Room No. 98, Patch Repair Work Using Hotmix Near Fezane Madina Mosque In Nagla Mewati In Room No. 59. - Providing and applying tack coat with bitumen emulsion using pressure distributor at the of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. 2 Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonne per hour using crushed aggregates of specified grading, premixed with bituminous bider @ 3.50 percent by weight of total mix and filler, transporting the hot mix to work site laying with hydrostatic paver finisher with sensor control to the required grade level and alignment, rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause 507 complete in all respects. 3 Providing and laying semi-dense bituminous concrete with 100 120 TPH batch type HMP producing an average output of 75 tonne per hour using crushed aggregates of specifled grading. premixed with bituminous bider @ 5.00 percent by weight of total mix and filler, transporting the hot mix to work site laying with hydrostatic paver finisher with sensor control to the required grade level and alignment, rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause 508 complete in all respects. 4 Cleaning of floor with in all complete. (NS) 5 Providing and laying hot applied thermo plastic compound 2.5 mm thick including refletrorising glass beads @250 gm/sqm. Area, thickness of 2.5 mm is exclusive of surface applied glass beads as per I.R.C. 35. The finish surface to be level, uniform and free from steaks and holes. Composition of thermo plastic material shall be as per table 800-3 of clause 803 of MORTH including cost of work as direction E/IC. (Chapter-19 Miscellaneous Sr. No. 7) 6 Sub Total (A) 7 Add/Deduction Rs. For Estimate Figure Amount Match 8 Grand Total

INR 2360 /-

INR 22.01 Lakhs /-