|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc 1.5 sqmeach |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4.00 sqm each |
| 3 | Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each |
| 4 | Taking down and refixing shutters of any description exc 1 sqm and n exc 2 sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete. |
| 5 | S&FsolidPVC door frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete |
| 6 | S&F factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel designed with 2 mm thick moulded PVC sheet on front face and 4mm moulded colour PVC sheet on back face as per specification and drawing complete |
| 7 | M&L for 35 mm thick 2ndclass hardwood glazed and skeleton shutter open rebeted and prepared to receive glass gauze etc(with shash bar) edges of framing plain chamfered or rounded filled with cut and mitered beads for securing, glass etc size of member of shutter asspecified in SSR Part-I section 8,clause 8.24(a) supplyed and fitted to chowkats and directed by Engr-. in Charge. |
| 8 | M&L for30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, kiln seasoned and chemically pressed treated and all as Specified and as directed by Engineer- in -Charge. |
| 9 | S&Fdecorative laminates of 1mm thick glossy finish, colour and pattern as approved adhesive complete all as specified and directed |
| 10 | S&F 100 mm long SS butt hinges and fixed to frame with scrwewd or welding / gas welding complete.. |
| 11 | S&F200mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed. |
| 12 | S&F brass sliding door bolt with sand or die-cast brass hasp staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed length of bolt 250 mm complete all as specified and directed in Engineer -in -Charge. |
| 13 | S&F150mm longextruded brass handles, fabricated type polished all as specified and as directed by Engineer-in-Charge. |
| 14 | S&F 150mm long Floor door stopper of brass body and and tongue, with hard drawn steel spring, fixed to bottom of door shutter |
| 15 | S&F 150mm long aluminium anodized barrel tower bolts of extruded section and fixed. |
| 16 | S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 250 mm complete all as specified and directed in Engineer -in -Charge. |
| 17 | S&F for 150mm longExtruded aluminium alloy handles, fabricated type, anodisedall as specified and as directed by Engineer-in-Charge. |
| 18 | S&F 150mm long Floor door stopper of alunium body and tongue, with hard drawn steel spring, fixed to bottom of door shutter |
| 19 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples orteak wood beading for wooden doors etc |
| 20 | M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primerall as specified. |
| 21 | M&L forpainting at old wooden painted surface of any description over 10cm width or girth not otherwise described including preparation , of surface and two coats of synthetic enamel paint complete. |
| 22 | S&F in repair sheet glass(Plain/Frosted) 4 mm thick ordinary quality fixed with wooden beadings/ oil putty in squares n.exc 0.5 sqm in each pane. |
| 23 | S&F in repair 25 mm dia Stainless steel drapery rod with and including two nos of bracket/holders suitable for drapery 25 mm dia rods of one window / door openings complete all as specified and as directed. |
| 24 | M&L for aluminium doors, powder coated (of approved colour), with frame of section 100mm x 44mm x 1.50 mm thick and shutter with bottom rail of section 150mm x 44.5mm x 1.50 mm thick, middle rail of section 85mm x 44.5mm x 1.50 mm thick and top rail of section 80.4mm x 44.5mm x 1.50 mm thick and styles of section 80.4mm x 44.5mm x 1.50 mm thick with 4 mm thick glass (plain/ tinted/ with laminated film) or prelaminated board fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150 mm wide and 1.50 mm thick including 150 mm aluminium tower bolt, brass mortice lock complete all as per Drawing No. CEAA/TD/63 sheet No. 2.2 complete all as specified and as directed. |
| 25 | M&L for aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50 mm, bottom size 92x31.75x1.50 mm and shutter top & bottom of size 40x18x1.50 mm and sides (handle) of size 40x18x1.50 mm and lock side shutter frame of size 40x18x1.50 mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 4 mm thick glass with necessary rubber beading gasket etc, one wire mesh shutter and and two nos glass shutter as per drawing No CEAA/STD/01/2010 sheet No 1/1 complete all as specified and as directed by Engr-in-Charge. |
| 26 | S&F aluminium ventilator powder coated (requried colour to match window colour), louvers type, frame top & bottom of size 31x42x1.50 mm (rectangular tube of size 40x20x2mm (and middle vertical of size 42x46.20x1.50 mm Section and clip for fixing wire mesh and glass of size 19x17.30x0.90 mm thick including stainless steel wire cloth 0.36mm nominal dia of wire and 1.40 mm average width of aperture and fixed with stainless steel wire staples and supply and fixing 4 mm thick glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc all as specified and as directed by Engineer-in-Charge. |
| 27 | M&L for aluminium sliding door for cupboard made with power coated aluminium anodised sectionfixed in wall including provision for receiving glass pane etc and fixing the same with aluminium anodised beading and rubber gasket including 5mm thick glass (black/tinted/plain) and all necessary fittings complete as in sliding door all as specified and as directed. |
| 28 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings;Flat Iron welded framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 29 | M&L for painting to new steel surface of any description over 10cm width or grith not otherwise described including preparation , priming with zinc chrome primerand two coats of synthetic enamel paint complete. |
| 30 | M&L preparation of old steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified. |
| 31 | S&F in repair for false ceiling at height of 600mm x 600mm x 15mm mineral fibre ceiling tiles RH-99 of type micro looks edge laid on super fine XL 15mm exposed grid systems with 15mm wide T- section flanges. The frame work comprises of main runner of size 15mm x 32mm x 3000mm spaced at 1200mm centre securing fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers (GI wire of 3.0mm dia) to be fixed by approved roof plug, level adjusters and screws etc. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall flush fitting 1200mm long cross tees of size 15mm x 26mm x 1200mm to be interloched between main runners at 600mm centers to form a 1200mm x 600mm module. Cut cross tees longer than that 600mm to be supported independently. 600mm x 600mm modules to be formed by fitting 600mm long flush fitting cross tees of size 15mm x 26mm x 600mm centrally between the 1200mm crosstees perimeter wall angle of size 19mm x 19mm x 3000mm secured to wall at 450mm maximum centres. Finally RH-99 mineral fibre tile 15mm thick micro look edge has to be laid on the 600mm x 600mm module complete all as specified and as directed by Engr-in-Charge. |
| 32 | S&Fin repair false ceiling sheet size of 600x600x15 mm mineral fibre ceiling tiles RH-99 of type micro looks edge.complete as as specified and directed |
| 33 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid and bedded on pointed on any mortar complete all as specified and directed. |
| 34 | M&L for single piece of green marble slab 15-18 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble slab including moulding,cutting and polishing and nosing and polishing of the free or front edge of the slab window cills etc and including 15mm thick backing coat in CM1:4 all as specified and directed in Engineer -in -Charge. |
| 35 | M&L for grante work (of any type) 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking/WHB platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding etc all as specified and directed in Engineer -in -Charge. |
| 36 | Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish off the premises |
| 37 | M&L for 15 mm thick screed bed or bedding layer of morter for laying floor finishes in CM 1:6.complete all as specified and as directed |
| 38 | M&L for vitrified ceramic tiles 8 to 10mm thick dark shade (square/ rectangular) polished area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in floor/skirting etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 39 | M&L for non- skid ceramic coloured joint free tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. |
| 40 | M&L glazed ceramic coloured digital tiles 600mmx300mmx7mm thick invertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat of CM 1:4, 10mm thick etc all as specified and as directed |
| 41 | Demolition of wall of brick and stonebuilt in cement mortorincl all quoins, archs, pillars,etc all as specified. |
| 42 | M&L for half brick work sub class B bricks, straight or curved on plan to any radius built in half brick thick wallsin CM 1:4 all as specified. |
| 43 | M&L for brick work sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 44 | Demolition of cementconcrete (reinforced) of roofs (other than ground floors), beams, staircases, landing, chajjas and similar suspended workcomplete all as specified and directed by Engineer-in-Charge. |
| 45 | M&L for mild steel TMT bars 8mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) n less than 0.9mm dia or securing with clips complete all as specified and directed |
| 46 | M&L for reinforced cement concrete (nominal mix) Type B-1, 1:2:4 (using 20mm garded stone aggregate) as in slab, suspended slab,shelves , plateform and the like complete all as specified and directed |
| 47 | M&L for formworks to sides and sofits of shelves, platform and thle like rough finished surface of concrete complete all as specified and directed |
| 48 | Taking down cement or cement lime plaster of any description on brick or stone wall/ celling including raking out joint , haking for key scrubing with water etc complete all as specified and directed |
| 49 | M&L for rendering 10 mm thick on fair faces of concrete or brick masonary in CM 1:6 finished even and smooth (without using extra cement) complete all as specified and directed |
| 50 | M&L for rendering 15 mm thick on fair faces of concrete or brick masonary in CM 1:6 finished even and smooth (without using extra cement) complete all as specified and directed |
| 51 | M&L for rendering 10 mm thick in CM 1:6 and setting coat 5 mm thick in CM 1:4, finished even and smooth (without using extra cement)in wall including scaffolding complete all as specified and directed |
| 52 | M&L for rendering 5 mm thickin ceiling surfaces in CM 1:4, finished even and smooth (without using extra cement) complete all as specified and directed |
| 53 | S&F wire netting of galvanised steel wire 1.40mm dia and 20mm size of mess fixed with tinned tacks of wire staples |
| 54 | M&L for preparation ofnewly plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer and 3mm thick coat ofwall care putty. |
| 55 | M&L for preparation ofnew plastered surface of ceiling and applying two coats of distemper oil emulsion over a coat of primer. |
| 56 | M&L for preparation ofnew plastered surface of wall and applying two coats of weather proof acralic paintover a coat of primer. |
| 57 | M&L for complete removal of existing treatment of ceiling surface and applying two coats of distemper oil emulsion |
| 58 | M&L for complete removal of existing treatment from old wall surfaces and applying two coats of oil bound distemper and a coat of primer over 2 to 3 mm thick birla wall care puttyas per site requirement and as directed by Eng-in-Charge. |
| 59 | M&L for complete removal of existing treatment of wall surface and applyiong two coats of weather proof acralic paint over a coat of primer on old surface of wall and filling cracks with white cement etc complete all as specified and directed. |
| 60 | Demolition of cement concrete(unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above G.L) |
| 61 | M&L for providing 75 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) as in sub base complete all as specified and directed |
| 62 | M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey pigment cement and pigments, set, jointed and pointed in neat cement slurry in floors including 15mm thick CM (1:6)screed bed or bedding layer as directed. |
| 63 | Taking up or down 15mm boresteel tubing and connection including cleaning for refixing or removal to store all as directed. |
| 64 | Taking up or down 20mm boresteel tubing and connection including cleaning for refixing or removal to store all as directed. |
| 65 | S&F16mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on WALLS / CEILING complete all as specified. supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete. |
| 66 | S&F of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on WALLS / CEILING complete all as specified. supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete. |
| 67 | M&L for cuttingchases,in brick walls pinning in, making good to facing where required and pointing in cement mortar 1:3 to endsor edges of andings steps, cills sunshades, shelves lintels etc and cutting chases for concealed water tubingand making good cutting not exc 10 cm grith |
| 68 | Re-fixing old 15mm/20mm dia boresteel water tubing& connection in new or old positionfixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, , reducer, etc as required complete. |
| 69 | S&F in repair 75 mm dia outlet CI nahani trap plain with S/S grating including jointing with solvent cement complete all as specified and directed. |
| 70 | S&F in repair of Bib taps 15mm dia,chromium plated, long body,with CP flange all as perfixed complete all as specified and as directed.Make :- Cera Cat part No F1020151 or equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 71 | S&F in repair of 15mm bore angle cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.Make :- Cera cat part No F1019201 or equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 72 | S&F in repair, two way angle valve cock chromium plated fancy type bore 15mm.Make:- Cera cat part No F2002211or equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 73 | S&F in repair vitreous china wash basin table top size 450X400x140mm white, including ss cupling, waste pipe complete accessoriescompleted all as specified and directed. Make:- Cera cat part No S2020163 or equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 74 | S&F in repair vitreous chinaurinals size 375X390x590mm ivorye, including all fittings ss cupling, waste pipe, spreader complete accessories all as specified and directed. Make:- Cera cat part No S4020112 or equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 75 | S&F in repair 15 mm dia single lever basin mixer fency type of Chromoum Platedbrass with or without lettered hot and cold with long shank, screwed shanks and fly nuts, screwed for iron pipes or for WHB complete all as specified and directed. Make :- Cera cat part No F1015451 or equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 76 | S&F in repair of health faucet ABS body with 1.5 meter SS braided connection pipe and wall hook complete all as specified and as directed.Make :- Cera cat part No F8030103 equivalent or equivalent model of makes as catered in Appendix \"B\"& as approved by GE... |
| 77 | S&F in repair hand shower brass chromium plated 120mm dia five flow with 1.50 mtr hose & wall hook arrangement completed all as specified and directed. Make:- CERA cat part No F7030310PB or equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 78 | S&F in repair wall mixer (3-in-1) brass chromium plated with arrangement for both telephonic hand shower and overhead shower with bend pipe complete accessories all as specified and directed. Make:- Cera cat part No F2002403 or equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 79 | S&F in repair sink cock brass chromium platedwall mounted with 150 mm long swivel spout and wall flange complete accessories all as specified and directed. Make:- Cera cat part No F2002261 or equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 80 | S&F in repairwall mixer (3-in-1) brass chromium plated with arrangement for both telephonic hand shower and overhead shower with bend pipe complete accessories all as specified and directed. Make:- Cera cat part No F2002403 oor equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 81 | S&F in repair of overhead shower rose 100x100mm size brass chromium plated with swivel joints including fixing steel pipe or unions with all necessary fittings complete all as specified and as directed.Make :- CERA cat part No F7020306AB or equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 82 | S&F in repair of overhead shower arm 450mm with flang brass chromium plated with all necessary fittings complete all as specified and as directed.Make :- CERA cat part No F7040106 oor equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 83 | S&F PVC water connection 450 mm long to wash basin of 15mm dia including CP nuts and washers all as specified and as directed by Engineer-in-Charge.. |
| 84 | S&F in repair SS soap dish complete all as specified and directed by Engineer-in-Charge.Make Cera cat part No F5015106CH or equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 85 | S&F in repair SS tumbler holder complete all as specified and directed by Engineer-in-Charge.Make Cera cat part No F5015107CH or equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 86 | S&F in repair SS towel ring square complete all as specified and directed by Engineer-in-Charge.Make Cera cat part No F5015115CH or equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 87 | S&F in repair SS paper holder with flap guard complete all as specified and directed by Engineer-in-Charge.Make Cera cat part No F5015110CH or equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 88 | S&F in repair SS soap dispenser complete all as specified and directed by Engineer-in-Charge.Make Cera cat part No F5015111CH or equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 89 | S&F in repair SS towel rack with hook60 cm long including brackets/flanges completed all as specified and directed. Make Cera cat part No F5015131CH or equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 90 | S&F in repair single bowl sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, cupling, west pipe, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 765x465mm with all necessary fittings complete all as specified and as directed.Make :- CERA cat part No B4711502 or equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 91 | S&F in repair corner sliding shower partition 8mm clear glass, CP finish hardware, width 1800-2200,height 2000mm (2 fixed glass +1 Sliding door) on wallCP finish with all necessary fittings complete all as specified and as directed.Make :- CERA cat part No SPCS8503AA or equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 92 | S&F in repair single piece EWC of size 660x365x765 mm with soft close seat cover and fixed with \"S\" or \"P\" trap including all necessary fittings like jet and flexible pipe etc complete set and making all necessary connections complete all as specified and as directed. Make Cat CERA cat Part No S1013105VS or equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 93 | S&Fin repair table top wash handbasin of size605 x 395 x 1200 mm with waste coupling and waste pipe etc complete all as specified and directed. Make CERA cat part No S2020141 or equivalent model of makes as catered in Appendix \"B\"& as approved by GE.. |
| 94 | S&F in repair PVC valveless, syphonicaction type flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handleincluding bracket, complete all as specified and directed. |
| 95 | S&F in repair 5mm thick glass mirror (size 600 x 800) with decorative high bright LED strip, touch switch for LED light, double coat for protection and longevity and on silver plating the back for better refection etc completed all as specified and directed. Make CERA cat part No B3530105 or equivalent model of makes as catered in Appendix \"B\" in PS & as approved by GE. |
| 96 | S&F in repair 5mm thick glass mirror with double coat for protection and longevity and on silver plating the back for better refection etc completed all as specified and directed. Make CERA cat part No B3510106 or equivalent model of makes as catered in Appendix \"B\" in PS & as approved by GE. |
| 97 | S&F 12 mm thick Toughened glass as in partition/ fixed window including diamond edging all sided , eatching , lining and including monograme area nexc 0.50 Sqm each by sand blasting , including chromium plated \" L\" or \" U\" heavyduty clamps suitable for fixing of glass , min 4 nos per Sqm complete all as specified and directed |
| 98 | M&L for Complete removal of existing treatment from wall or ceiling surfaceby washing , rubbing down, stopping of distempered and painted surface including preparing surfaces as per manufacturer\"s instructions and applying wall paper of selected quality, colour or design as directed by GE complete all as specified and directed |
| 99 | S&F in repair for 20mm think PVC solid kitchen cabinets/cupboard made with frame including stainless steel auto hinges complete all as specified and as directed by Engineer-in-Charge. |
| 100 | S&F CP decorative type SS handles 75mm long fixed to PVC sheet or frame all as directed by Engineer-in- Charge. |
| 101 | S&F magnetic and connected plate to shutter and frame as per sample complete all as specified and directed. |
| 102 | S&F in repair for glass(5mm thick) corner shelf 12 x 12 inch wall mountwith SS railingcomplete incl bolt/bracket for securing to wall all as specified and as directed by Engineer-in-Charge. |
| 103 | S&F in repair for glass (5mm thick) corner shelf 6 x 6 inch wall mountwith SS railingcomplete incl bolt/bracket for securing to wall all as specified and as directed by Engineer-in-Charge. |
| 104 | Removing of existing unserviceable water proofing treatment including PCC tiles (except PCC padding) taking down cement plaster etc, of any description and cleaning of top surface of cement concrete flushing out junction of parapet walls & washing down with water to remove all dirt etc including preparation of surfaces to receive new treatment and removing the rubbish off premises out side MD land. |
| 105 | Dismantling of un-reinforcement lime concrete/cement concrete in padding to roof slab and removing the rubbish off premisesout side MD land all as directed. |
| 106 | M&L for providing cement concrete type B-0, 1:2:4 using 12.50mm graded aggregate laid to slope in padding for WPT over roof slab complete all as specified and directed by Engineer-in-Charge. |
| 107 | M&L forrendering10mm thick in CM 1:4,mixed with WPC @ 200 ml per bag of cement on fair faces of concrete surfaces without using extra cementas in roof complete all as specified and directed.Note:- WPC shall be measured & paid separately. |
| 108 | M&L for preparing clean and dried plastered surface and applying a coat of oil basedbitumen primer conforming to IS 3384-1986 @ 0.20 litrs/sqmand then laying APP polymer modified membrane 3.0mm thick with non woven polyster reinforced membrane (min 3.50 kg/sqm) having thermal insulation with white mineral gravel finish on upper side of membrane and laid by torch application method to the entire surface all as specified and directed by Engineer in Charge. |
| 109 | Supply only intergral water proofing compound ISI marked. |
| 110 | Dismantling water tanks exc. 250 but n. exc. 500 litre capacity complete all as specified and as directed. |
| 111 | Dismantling water tanks exc. 500 but n. exc. 1000 litre capacity complete all as specified and as directed. |
| 112 | M&L for removing the tank over roof of size ex 250 & n. exc 500 litres and re-fixing in the same position including cleaning all as specified and as directed. |
| 113 | S&F rotational moulded water storage tank 500 ltr capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. |
| 114 | S&F rotational moulded water storage tank 750ltr capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. |
| 115 | S&F 15mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 116 | S&F 15mm dia (min weight 142 gms) PVC ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. |
| 117 | Taking dawn CI pipe 100mm/75mm of any description all as specified and as directed by Engineer-in-Charge.. |
| 118 | S&FCI waste and vent pipes in any length with or without ears,fixed to wall, bore of pipe 100mm all as specified and as directed by Engineer-in-Charge. |
| 119 | S&FCI waste and vent pipes in any length with or without ears,fixed to wall, bore of pipe 75mm all as specified and as directed by Engineer-in-Charge. |
| 120 | M&Lfor bends of any type radius diminishing pieces or tapers ( large bore measured) of 75mm dia bore with oval access doors etc. |
| 121 | S&F cast iron bend 100mm bore (any radius) dimnishing pieces or taperswith oval access doors etc. |
| 122 | S&F CI cowl of size 100mm all as specified and as directed.. |
| 123 | S&F CI cowl of size 75mm all as specified and as directed.. |
| 124 | Taking down PVC pipe (SWR) 110mm dia bore and connection complete. |
| 125 | Taking down PVC pipe (SWR) 75 mm dia bore and connection complete. |
| 126 | S&F 75 mm dia bore pipe (SWR) single socket in any length rubber joints fixed to wall complete all as specified & as directed. |
| 127 | S&F 110 mm dia bore pipe (SWR) single socket in any length rubber joints fixed to wall complete all as specified & as directed. |
| 128 | S&F 110mm borePVC (SWR) bends any radius with access door complete all as specified & as directed. |
| 129 | S&F 110mm borePVC (SWR) junction single, (single T) equal or unequal any radius with access door complete all as specified & as directed. |
| 130 | S&F 110mm borePVC (SWR) cowl any radius complete all as specified & as directed. |
| 131 | S&F 75mm borePVC (SWR) bends any radius with access door complete all as specified & as directed. |
| 132 | S&F 75mm borePVC (SWR) junction single, (single T) equal or unequal any radius with access door complete all as specified & as directed. |
| 133 | S&F 75mm borePVC (SWR) cowl any radius complete all as specified & as directed. |
| 134 | Taking down copper/aluminium point wiring (light,fan, socket or power) including fixture and fittings complete etc removing the materials for taking credit and making good the disturbed surface of wall/floor etc. |
| 135 | Taking down old/existing MCB DB SPN/ TPN with MCB\"s complete by disconnecting all as specified and directed. |
| 136 | Taking down oldsub main wiring with 2runs/4runs of 4/6/10 sqmm aluminium/copper cables including making good disturbed surface all as specified and directed. |
| 137 | M&L for Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor PVC insulated cable 1100 volts grade single coreFRLSHdrawn into and including non-metallic rigid PVC conduit of 20 mm dia,concealed FRLSHwiring,alongwith 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roofexcluding Modular Metal flush box and white cover plate with frame the switches, sockets, fan regulator etc as required suitable for Modular type fitting /fixture etc which shall be measured and paid separately under relevent items, all as specified and directed for :- |
| 138 | One light point controlled by one switch |
| 139 | One Ceiling fan/Exhaust fan point controlled by one regulator / switch. |
| 140 | One 3 pin socket outlet 5 amps socket onindependent board |
| 141 | One 3 pin socket outlet 5 amps socket on same board |
| 142 | All as per item No 137.03 here in before but 3 pin socket outlet 15 amps sockets on independent board with 2.5sqmm mutistranded copper PVC insulatedFRLSH cable. |
| 143 | One bell/buzzer point controlled by one push button |
| 144 | One light point controlled by two Nosof two way switches. |
| 145 | S & F switch modular10 amps one way flush type 1 module. |
| 146 | S & F switch modular10 amps Two way flush type 1 module. |
| 147 | S & F switch modular10 amps bell push flush type 1 module. |
| 148 | S & F switch modular16 amps one way flush type 1 module. |
| 149 | S & F socket modular 2/3 pin 10 amps flush type 2 module. |
| 150 | S & F socket modular 2/3 pin 6A/16A flush type 2 module. |
| 151 | S & F only electronic modular fan regulator 120w step type 2 modular. |
| 152 | S & F modular white cover plate with frame 1 module |
| 153 | S & F modular white cover plate with frame 2 module |
| 154 | S & F modular white cover plate with frame 3 module |
| 155 | S & F modular white cover plate with frame 4 module |
| 156 | S & F modular white cover plate with frame 6 module |
| 157 | S & F modular white cover plate with frame 8 module |
| 158 | S&F Modular Metal flush box 1/2 Module |
| 159 | S&F ofModular Metal flush box 3 Module |
| 160 | S&F ofModular Metal flush box 4 Module |
| 161 | S&F of Modular Metal flush box 6/8 Module |
| 162 | M&L for sub main wiring with 2 runs of 4 sqmm PVC insulated stranded copper conductor FRLSH cable and one run of 4sqmm copper FRLS cable as earth lead in suitablePVC conduit all as specified.Note : Two runs of main wire, one run of earthwire & PVC conduit shall be measured as unit. |
| 163 | M&L for sub main wiring with 4 runs of 10 sqmm PVC insulated stranded copper conducotr FRLSH cable and one run of 10 sqmm copper FRLS cable as earth lead in suitanle PVC conduit all as specified.Note : Four runs of main wire, one run of earthwire & PVC conduit shall be measured as unit. |
| 164 | S&F 3 core 2.5 Sqmm PVC round sheathed (flexible)industrial cable 1100 volts grade Cable with copper conductor (For garden Light) all as specified and as directed. |
| 165 | S&F Rigid non-metallic PVC conduit20mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouthube ends and fixing accessories such as couplers, lock nuts, saddles,ipe hooks etc. |
| 166 | S & Fceiling rose3 terminals PVC / Polycarbonate, isolated body complete all as specified and as directed. |
| 167 | S & F Bell, AC,230 Volts, single pole , Multi music type completeall as specified and as directed. |
| 168 | Supply and fix of single pole and neutral encloser with a two pin and earth plug and socket complete with one single pole MCB 240V, 20Amp |
| 169 | S&F Double Door Vertical TPN Distribution Box4 way complete in SS enclosurewith 200 amps rated busbar. |
| 170 | S&F MCB DB SPN 12 way complete in SS enclosure double door type with 200 amps rated busbar. complete with all as specified and directed by Engr-in-Charge. |
| 171 | S&F MCB DB SPN 8 way complete in SS enclosure double door type with 200 amps rated busbar. complete with all as specified and directed by Engr-in-Charge. |
| 172 | S&F MCCB 415 Volts, 16 KA breaking capacity, 100 Amp, 4 pole. Complete all as specified and directed by Engineer in Charge. |
| 173 | S & F RCBO Four Pole 100mA, 440 volts 63 Amps with Front face indication for earth leakage fault IP 20 protected terminals 35 sq mm terminals Sliding shutters. Complete all as specified and as directed by Engr-in-charge. |
| 174 | Supply and fix amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning(a) S&FMCB SP6 - 40 Amps with 10KA breaking capacity |
| 175 | Supply and fix amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.(a) S&FMCB SPN40 - 63 Amps with 10KA breaking capacity |
| 176 | Supply and fixLED lights fitting 4 feet 1x 20W, CCT 6500K, 2000lm,220V,AC decorativeox type with driver, holder including LED tube light connecting up withthree core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 177 | Supply and fix LED light fitting mirror type with high out put diffuser 2feet, 10 watt, CCT 6500K, 1000lm, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cableof suitable size complete |
| 178 | S&F Energy saving new generation 10W LED IP65 bulkhead luminaire with opal diffuser /10W. |
| 179 | S&F Angle type lamp holder ,PVC /Policarbonate typeWith LED bulb 9 Watt all as specified and directed by Engineer in Charge |
| 180 | Supply and fix in repairLED luminaries 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. including taking down old unserviceable electronic fan regulator andremoving the material for taking credit all as specified and directed. |
| 181 | Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) |
| 182 | Cutting the existing wall for fitting exhaust fan and making good disturbed surfaces inner and outer of wall as per existing treatment Complete all as specified and as directed by Engr-in-Charge. |
| 183 | Supply and fix exhaust fan, made of sturdy Engineering plastic bodycomplete with louvers shutter, voltageAC single Phase. 230V, 50 Hzof size 300m sweep with,RPM 1200, copper winding, complete all as specified and as directed by Engr-in-Charge |
| 184 | M/L for providing earthing complete with galvanised steel earth plate electrode 600×600.× 6mm thick, buried directly in round (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test pointincl earth pit complete as directed by Eng-in-Charge and all as specified or indicated including testing on completion.all as directed by Engineer- in charge. |
| 185 | M/L for earth continuity conductor or 4mm dia galvanised ironor steel wire buried in ground / fixed on wall / drawn in 20mm dialight grade GI pipe, all as directed and specified by Engr in Charge. |
