Procurement Of Maintenance Materials For Functioning Of Street Light In South Zone Dnh Area , Supply Of Ac-3 Duty 3 Pole Power Contactor With 2 No & 2 Nc Aux Contacts Complete With 415V/220V Operating Coil Suitable For (L&T, Bch,T.C., Siemens, C&Smake). 110 Amp. , Supplying Of Led Street Light / Flood Light Fittings With High Power White Leds Wattage Of 3 Watt And Above Assembled On Single Mcpcb, Efficiency More Than 130 Lm/W And Corrosion Free High Pressure Die Cast Aluminum Housing With Smooth Finish Powder Coated And Heat Sink Extruded Aluminium With Diffuser And Polycarbonate Optics/ Lenses, With Toughened Glasswith Company Mark/Name Engraved Or Embossed 160 To 270 V,Power Factor More Than 0.95, Thd < 10 %, Cct3000 K To 5700K, Uniformity Ratio >0.45, Luminaire Efficacy> 100 Lumens/Watt. Led Driver Efficiency > 85 %.(Fittings Required Lm-79 & Lm-80 Certificates) (Note: Below Description Have Shown Ranges Of Wattage Capacity Of Led Fittings. The Engineer Incharge May Select Any Wattage Capacity Between The Ranges Shown.) (Make - Crompton, Havells, Hpl) 36 Watt - Cat.-Iii. , Supply Of Digital Time Switch Having Lithium Cell 6 Years Operative And Operate Battery Backup 1 Channel Day Clock With 14 Memory Programme, Suitable To Operate On 240V + 5%, 16A With, Floating Contacts Minimum Switching Setup Time 1 Minimum & Lcd Display. Also Comprised Permanent On/Off Switching. Programming Switches & Housed In Fire Proof Thermoplastic Enclosure & Transparent Cover Erected As Required With Necessary Connection Erected As Directed. 16 Amp. (110A Set). , Providing Approved Maketriple Pole Metal / Iron Clad Switch (Ictp) & Fuse With Neutral Link 415/500 V Confirming To Is. 63 Amp. Cat. - Iii , Supply Offollowing Type Of Modular Type Accessories Mounted With Pvc / Metallic/Wooden Box, Single Mounting Base Frame Covered With Textured / Metallic/White Front Plate , Modules Erectedwith Necessary Connections As Per Site Situation Directed By Engineer In Charge. 6 Amp. Cat. Iii , Supply Of Electrical Insulation L.T. Tape Role With Isi Marked Having Nominal Width 1.8 Cms Nominal Length 9.0 Mtr Nominal Thickness 0.125 Mm And Having Self Adhesive Pvc Pvc Tap. , Supply Ofkitkat Pattern Porcelain Cut-Out Fuse With Base Of Following Current Capacity Erected On Existing Block Board. 63 Amp. , Supply Of Miniature Circuit Breaker Single Pole 6A To 25A Suitable To Operate On 240 V A.C. System And Having Breaking Capacity10 Ka To Be Erected In Existing Box. Confirming To Is 8828/1996 With Isi Mark25 Amp. Cat. - Iii. , Supply Of 240 V Mcb Double Pole Switch For Lighting Load (B Curve) Having 10 Ka Breaking Capacity & Confirms To Is : 8828 In Existing Box Having Following Capacity 40 Amp. Cat. - Iii , Supply Of 240 V Mcb Double Pole Switch For Lighting Load (B Curve) Having 10 Ka Breaking Capacity & Confirms To Is : 8828 In Existing Box Having Following Capacity 25 Amp. Cat. - Iii. , Supply Of240 V Mcb Double Pole Switch For Lighting Load (B Curve) Having 10 Ka Breaking Capacity & Confirms To Is : 8828 In Existing Box Having Following Capacity 32 Amp. Cat. - Iii. , Supply Of 415 V Mcb Three Polefor Motor & Inductiveload (C Curve) Having 10Ka Breaking Capacity & Confirms To Is :8828 In Existing Box Having Following Capacity63 Amp. Cat. - Iii. , Providing Xlpe (Is:7098)(I)-88 Isi Armoured Cable Multistrand / Solid Aluminium Conductor For1.1 Kv. To Be Laidon Wall With Necessary Clamps Or In Existing Trench/ Pipe Of Following Size Of Cables (Make-Rr Cable, Polycab, Polycab, Attracab, Allwyn). Armoured Aluminium 4 Core 10 Sq.Mm Wire. , Providing Xlpe (Is:7098)(I)-88 Isi Armoured Cable Multistrand / Solid Aluminium Conductor For1.1 Kv. To Be Laidon Wall With Necessary Clamps Or In Existing Trench/ Pipe Of Following Size Of Cables (Make-Rr Cable, Poycab, Polycab, Attracab, Allwyn). Armoured Aluminium 4 Core 4 Sq.Mm Wire , Providing Xlpe(Is:7098) (I)-88 Isi Unarmoured Aluminium Cable 1.1 Kv.Grade To Be Erected As Directed Of Following Size. (Make-Rr Cable, Poycab, Polycab, Attracab, Allwyn). Unarmoured Aluminium 4 Core 4 Sq.Mm Wire. , Providing Of Mains With Isi Marked, 1.5Kv Grade Electrolyte Multi Stranded, Annealed Copper Conductor With Heat Resistant Pvc Insulated Conforms To Is 694, Iec - 227 Erected In Existing Pipe Offollowing Size (Specifically For Control Panel, Relays, Power Switchgears, Motor Starters & Control Wiring) With Required Size Of Copper Lugs, Nuts And Bolts If Required. (Make-Rr Cable, Poycab, Polycab, Attracab, Allwyn).Single Core 2.5 Sq.Mm Wire. , Providing Of Mains With Isi Marked, 1.5Kv Grade Electrolyte Multi Stranded, Annealed Copper Conductor With Heat Resistant Pvc Insulated Conforms To Is 694, Iec - 227 Erected In Existing Pipe Offollowing Size (Specifically For Control Panel, Relays, Power Switchgears, Motor Starters & Control Wiring) With Required Size Of Copper Lugs, Nuts And Bolts If Required. (Make-Rr Cable, Poycab, Polycab, Attracab, Allwyn) Single Core 1.5 Sq.Mm Wire. , Providing Of Mains With Isi Marked, 1.5Kv Grade Electrolyte Multi Stranded, Annealed Copper Conductor With Heat Resistant Pvc Insulated Conforms To Is 694, Iec - 227 Erected In Existing Pipe Offollowing Size (Specifically For Control Panel, Relays, Power Switchgears, Motor Starters & Control Wiring) With Required Size Of Copper Lugs, Nuts And Bolts If Required. (Make-Rr Cable, Poycab, Polycab, Attracab, Allwyn). Single Core 4 Sq.Mm Wire. , Supplying & Erecting Xlpe(Is:7098) (I)-88 Isi Unarmoured Aluminium Cable 1.1 Kv.Grade To Be Erected As Directed Of Following Size. (Make-Rr Cable, Poycab, Polycab, Attracab, Allwyn). Unarmoured Aluminium 2 Core 4 Sq.Mm Service Wire. , Supplying & Erecting Xlpe(Is:7098) (I)-88 Isi Unarmoured Aluminium Cable 1.1 Kv.Grade To Be Erected As Directed Of Following Size. (Make-Rr Cable, Poycab, Polycab, Attracab, Allwyn). Unarmoured Aluminium 2 Core 6 Sq.Mm Service Wire , Supplying Of Led Street Light / Flood Light Fittings With High Power White Leds Wattage Of 3 Watt And Above Assembled On Single Mcpcb, Efficiency More Than 130 Lm/W And Corrosion Free High Pressure Die Cast Aluminum Housing With Smooth Finish Powder Coated And Heat Sink Extruded Aluminium With Diffuser And Polycarbonate Optics/ Lenses, With Toughened Glasswith Company Mark/Name Engraved Or Embossed 160 To 270 V,Power Factor More Than 0.95, Thd < 10 %, Cct3000 K To 5700K,Uniformity Ratio >0.45, Luminaire Efficacy> 100 Lumens/Watt . Led Driver Efficiency > 85 %.(Fittings Required Lm-79 & Lm-80 Certificates)(Note: Below Description Have Shown Ranges Of Wattage Capacity Of Led Fittings.The Engineer Incharge May Select Any Wattage Capacity Between The Ranges Shown.)(Make-Havells, Bajaj, Crompton, Philips, Syska). 190W Led Cat. - Iii
