|
| 1 | Panchayath office Samagra naveekaranam |
| 2 | 15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar |
| 3 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 4 | 13.104.1:Polishing on wood work with ready made wax polish of approved brand and manufacture :Old work |
| 5 | 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work |
| 6 | 13.99.1:Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give an even shade :One or more coats on old work |
| 7 | 11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. |
| 8 | OD320771/2025-2026:Toughened Glass Partition: Providing and fixing 12 mm toughenedglass using SS patch fittings (Dorma Crown /equivalent) upto a height of 1550 mm or as per site condition .Including all cost and conveyance of materials, labour etc complete |
| 9 | OD321320/2025-2026:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover |
| 10 | OD321321/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 11 | OD321331/2025-2026:Storage with Laminate Finish :Providing & placing Storage as per architect approved drawing (wide 45cm).Storage frames and rack to be finished with 19 mm thick Plywood (Calliberated 710Grade plywood/ Equivalent) .9 mm plywood (Calliberated 710 Grade plywood/Equivalent) to be fix on the back side of the storage .outer portion of the Storage to befinished with 1 mm laminate sheet (Greenlam lam/equivalent),inner portion of thestorage to be finished with 0.8 mm laminate sheet (Greenlam lam/equivalent) as perdrawing.Hardware & Fittings: SS 304 grade,Make:Hettich/Haffele/Equivalent.Finish as per drawing with necessary grooves, projections& electrical openings if any.Including cost and conveyance of all materialslabour charges etc.. |
| 12 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 13 | OD321847/2025-2026:MR Zebra Blinds:Providing and fixing manual Controlled Zebra blinds made of premium quality fabric aroundaluminium tube to be raised and lowered by ball chain pulley, to provide adequate privacy andlight control. as per architect approved brand & shade (Make:New Decor,Series-NL-Blackout/Equivalent). Including cost and conveyance of all materials labour charges etc. |
| 14 | 14.5.1:Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :Float glass panes of thickness 4 mm (weight not less than 10kg/sqm) |
| 15 | OD322432/2025-2026:Tables With Veneer Finish:Supplying and placing Tables as perdesign intent, framework made using 19 mm plywood( IS 303 grade,Greenply /equivalent) ,outer portion of the table to be finished using4 mm melamine polish finished veneer sheet (Make:Greenply/Equivalent).Complete the table with necessary drawers, Shelves inpropotion to size of table, Foot rest, CPU provision .Inner portion ofthe tables to be finished with 1 coat primer and 2 coat enamel paint.Provide edge polished 10 mm plain glass on table top Finish thethe necessary fittings(Make : Hettich/Ebco/Equivalent) .Includingcost and conveyance of all materials ,labour charges etc .(Plan areaof the table will be measured) |
