}

Proposed Development Work At Various Places Inparbhag No.1For Municipal Council Jintur Dist. Parbhani (Under Lokshahir Anna Bhau Sathe Nagri Vasti Sudhar Yojna 2023-24), jintur-Maharashtra

Directorate Of Municipal Administration has published Proposed Development Work At Various Places Inparbhag No.1For Municipal Council Jintur Dist. Parbhani (Under Lokshahir Anna Bhau Sathe Nagri Vasti Sudhar Yojna 2023-24). Submission Date for this Tender is 14-10-2025. Road Work Tenders in jintur Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

51634731
Proposed Development Work At Various Places Inparbhag No.1For Municipal Council Jintur Dist. Parbhani (Under Lokshahir Anna Bhau Sathe Nagri Vasti Sudhar Yojna 2023-24)
Tender
Indian
Maharashtra
Jintur
14-10-2025

Tender Details

Proposed Development Work At Various Places Inparbhag No.1For Municipal Council Jintur Dist. Parbhani (Under Lokshahir Anna Bhau Sathe Nagri Vasti Sudhar Yojna 2023-24)- 1 Civil Work 2 Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavatedaterials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. 3 Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. 4 Supplying hard murum/ kankar at the road site, including conveying and stacking complete. 5 Spreading hard murum/ soft murrum/ gravel or kankar for side width complete 6 Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete. 7 Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader / Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - I Material 8 Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader / Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - II Material 9 Construction of dry lean cement concrete Sub- base over aprepared sub-gradewith coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved byEngineer-in-charge , compacting withvibratory roller, finishing,curing andincluding preparation of sub-grade surface if required etc. complete.with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. 10 Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement with max 20% fly Ash ( Fly-ash upto 20% by weight of Cement) over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a Tilting type Concrete Mixer as per approved mix design, admixtures, spreading, laying compacting and finished in a continuous operation without paver machine, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. 11 Royalty Charges & Testing Charges 12 ROYALTY CHARGES FOR OTHER MINERALS 13 ROYALTY CHARGES FOR SAND 14 BASIC TEST OF AGGREGATE 15 HARD-MURUM COMPACTION TEST 16 COMPRESSIVE STRENGTH OF C.C CUBE (SET OF 3 CUBE) 17 CONCRETE MIX DESIGN

Key Value

Document Fees
INR 590 /-
Tender Value
INR 40.31 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail