Tender For Repairs To Z.P. Primary School Building At Vikas Nagar Kalamnuri Tq. Kalamnuri
Tender Value
49.98 Lakhs
Estimated cost
Bid Submission
21 Oct 2025
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kalamnuri → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs To Z.P. Primary School Building At Vikas Nagar Kalamnuri Tq. Kalamnuri
BOQ
| Sl. No. | Item Description |
| 1 | Item No.1) Removing cement tiles, or marble or polishedshahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete 46.19 SSR 2022-2023 |
| 2 | Item.No.2) Removingdoorsandwindowswithframesandstackingthematerialsasdirectedwithall leads, lifts etc. complete. Item No.46.15 SSR 2022-2023 |
| 3 | Item.No.3) Removingtheexistingcementplasterofanythicknesswithoutcausingdustnuisanceand stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete.32.33 SSR 2022-2023 |
| 4 | Item No.4) Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceableandunserviceablematerials,stackingthesameasandwheredirectedinthe compound including scaffolding etc. complete.(SSR 2022-2023 I.No.38.26) |
| 5 | Item No.5) Excavation for foundation in earth soils of ,all types sand, gravel, and soft murum including removingthe excavated material up to a distance of 50m beyond the building area stacking and spreading as directed ,dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering (includingshoring and strutting) etc complete (SSR 2022-2023 I.No. 21.02) |
| 6 | Item No.6) Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming,watering etc. complete.( SSR 2022-2023 I.No. 21.40) |
| 7 | Item No.7) Providing and laying in situ, cement concrete in M10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, compacting and curingcomplete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer, With natural sand.( I.No. 24.01 P.No. 217) |
| 8 | Item No.8) Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar1:6insuperstructureincludingstrikingjoints,rakingoutjoints,wateringand scaffolding etc. Complete.(SSR 2022-2023 I.No.27.05) |
| 9 | Item No.9) Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:4without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. (SSR 2022-2023 I.No.32.04) |
| 10 | Item No.10) Providing sand faced plaster externally in cement mortar using approved screened sand, in all positionsincludingbasecoatof15mmthickincementmortar1:4usingwaterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoatroughtoreceivethesandfacedtreatment6to8mm thickin cementmortar1:4finishingthesurfacebytakingoutgrainsandcuringforfourteendays scaffolding etc.complete. Item No.32.11 SSR 2022-2023 |
| 11 | Item No.11)Providing and laying vitrified matt fininsh tileshaving size 590 mm to 605 mm x to 605 mm of8to10mmthicknessandconfirmingIS.15622-2006(GroupBla)ofapprovedmake, shadeandpatternforflooringinrequiredpositionlaidonabedof1:4cementmorar ( SSR 2022-2023 I.No.33.42) |
| 12 | First Floor |
| 13 | Item No.12) Providing and laying chequered tiles of approved qualityof size 30 cm x 30 cm, confirming tocorrespondingI.S.forflooringinrequiredpositionlaidonabedof1:4cementmortar including cement float, filling joint with cement slurry cleaning curing etc. complete. (SSR 2022-2023 I.No.33.66) |
| 14 | Item No.13) Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12mmwithrollerwheelsconfirmingtogradeF.G.150fittedwithsnapheadedrivetsof minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clearspaceof150mmbetweentwosetsofcrossingswithholdfasts,stoppers,spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). Item No.39.26 SSR 2022-2023 |
| 15 | Item No.14)Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of approved colourtonewstructuralsteelworkandironworkinbuildingsincludingscaffoldingif necessary, cleaning and preparing the surface etc.complete. (excluding primer coat). 35.04SSR 2022-2023 |
| 16 | Item No.15)Providingandapplying2Coatsof100%Pureacrylicwaterbasedpaintwithspecialheat reflectance property to withstand the harsh climate for period of atleast 10 years of approved make.PaintsystemshouldprovidedurableandlonglastingfinishwithDFTofmin90 microns and should protect against concrete carbonation with R value of minimum 600 and equivalentconcretelayerthicknessvalueofmin150cm.Paintshouldhavebreathability property and should be able to cover hairline cracks in the surface upto 0.5mm The paint has to be applied on a coat of high quality acrylic copolymer based alkali resistant primer with excellentpenetratingpropertiesincludingcleaning,withallleadsandliftsatalllevelsetc complete, as directed by Engineer in charge. (SSR 2022-2023 I.No.48.12) |
| 17 | Item No.16) Providingand applyingtwocoatsof exterioracraylicemulsion paintconfirmingto corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces includingcleaning,preparingtheplastersurface,applyingprimercoat,scaffoldingif necessary , and watering the surface for two days etc complete. 35.25 SSR 2022-2023 |
| 18 | First Floor |
| 19 | Item No.17)Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 mm thickness of having a strength of 400 Kilogram/Sq.cm. of approved quality and shape on a bedof crushedsand of 25 to 30 mm thick including skirting jointsandcleaning etc. complete. (using 100% crushed sand) (SSR 2022-2023 I.No. 33.54) |
| 20 | Item No.18) Providing andlaying Castinsitu/ReadyMixcement concrete M-15oftrap/ granite/quartzite/gneissmetalforcoping to plinthorparapet,mouldedorchamferedasper drawingorasdirectedincludingsteelcentering,plywood/steelformworkcompacting, rougheningthemifspecialfinishistobeprovided,finishingunevenandhoneycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) 24.16 SSR 2022-2023 |
| 21 | Item No.19) Providingandfixingcorrugatedgalvanisedironsheetsof0.63mmthick(24B.W.G.)for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.). (SSR 2022-2023 I.No.38.04) |
| 22 | Item No.20) Providing and fabricating structural steel work in rolled sections like joists, channels, angles, teesetc.asperdetaileddesignanddrawingsorasdirectedincludingcutting,fabricating, hoisting,erecting,fixinginpositionmakingriveted/bolted/weldedconnectionswithout connecting plates, braces etc. andincluding one coat of anticorrosive paint andover ittwo coats of oil painting of approved quality and shade etc. complete.(SSR 2022-2023 I.No.23.01) |
| 23 | Item No.21) Providing and fixing steel window C.R.C. sheet as per I.S. 1513 : 1986. gauge sect. 65 x 40 x 25 mm shutter single sheet of 24 gauge single leaf joinedby fusion welding at appropriate points with vertical grooves of 15 mm wide and 15 mm deep at a distance of 45 mm. The first andlastribshouldbe60mmawayfromverticaledgeoftheshutter.theshuttershallbe welded, with angle to from the periphery of the shutter. At the center of the frame there shall beangleweldedtobifurcatetheframeintosegmentswithtwoleafshuttersquare12mm square guard bars at 120 mm center with all accessories (SSR 2022-2023 I.No.39.21) |
| 24 | Item No.22) Providing Water proofing treatment to old terraces by removing existing treatment, sealing of cracks by non shrink crack fill compound applying first coat of polymer modified semi-viscous paste prepared by mixing polymer of approved makeand Cement in 1 : 2 proportion (1 litre polymer : 2 Kg Cement ) to a neatly cleaned and dust free concrete surface and upto 300 mm over parapet wall prepared by removing loose and deposited material with brush and water, followed by a coat of flexible cementious coating eg. MYK-Aqufine U.M.,EL Monobond or equivalent as per manufacturer specification after laying glass fibre mesh of 10 x 10 specification of approved make over tacky surface of first coat of polymer followed by second coat in transverse direction, sprinkling coarse sand over it, followed by protective mechanical cover of 20 mm water proof plaster after sufficient curing 40 to 75 mm IPS 1:2:3 proportion using coarse aggregate of 10 MSA and water proofing compound and polypropylene fibres @ 125 gm per bag of cement within it conforming to IS in pannels making groove 3 to 4 mm wide & 10 mm deep & 3m/4m or as per site condition & filling the joints with polt sulphide sealant after curing, including providing holler with drip mouldsatthejunction and finishingthe concrete surface with neat cement slurry including curing as directed and ponding the surface as directed etc. complete; covering 10 years guarantee against leakproofness on Court Fee Stamp Paper of Rs. 100/- Item No.52.26 |
| 25 | First Floor |
| 26 | Item No.23) Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre asperdrawing including fixtures,necessarywelding andpainting withone coatsof anticorrosive paint and two coats of oil painting complete. (SSR 2022-2023 I.No.40.01) |
| 27 | Item No.24)(Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and1.5mmthickattop, 40mm diameterand1.5mm thickverticalsupportsspacedat1.5m centertocenterand8mmthicktoughenedglassincludingfabricating,fixtures,errecting, necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete (SSR 2022-2023 I.No.40.07) |
| 28 | Item No.25) Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12mmwithrollerwheelsconfirmingtogradeF.G.150fittedwithsnapheadedrivetsof minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clearspaceof150mmbetweentwosetsofcrossingswithholdfasts,stoppers,spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983).( SSR 2022-2023 I.No. 39.26) |
| 29 | Item No.26) Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete. (SSR 2022-2023 I.No.6.05) |
| 30 | Providingandfixingboarddisplayinginformation,suchas\"Nameof work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18gauge(1.25mm)thickmildsteelsheetpaintedwithonecoatof Zinc chromate stoving primer and two coats of enamel paint on front sideandgreystoveenamelonbacksideandborder/messages/ symbols etc. with approved colour shade paint complete, on M.S.angleofsize35x35x3mmframewithproperlycrossbraced M.S.anglesofsize35mmx35mmx3mmdulypaintedincludingTwo M.S.angleironpostsofsize65mmx65mmx6mm,3.65mlong painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge (Item No. No. 6.36) |
| 31 | Add For Royalty Charges |
| 32 | Add For Royalty Charges |
| 33 | Add For Testing |
| 34 | Add For Insurance |
| 35 | Add For GST |
AI Tender Summary
Tender Timeline
Oct 07, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 23, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender