Machinery And Equipment For Providing Of Dg Sets And Servo Voltage Stabilizers And Other Allied Items In Various Houses Of The Department At Kashmir Division (Additional Block Of Circuit House Srinagar)- 1 Supply, installation, mechanical erection, testing and commissioningof three phase125 KVA diesel generator set KIRLOSKAR/Cummins/ Mahindra make/ equivalent standard make as desired by engineer incharge. ( sample to be approved before installation),coupled to suitable alternator of 415 V, AC, 3-Phase 0.8 p.f. mounted on a 1) M.S. Fabricated base frame.,2) M.S. fuel tank of required capacity.,3) Residual Silencer with required arrangements for exhaust to the exterior as directed.,4) AMF Control Panel.5) Suitable batteries with lead.,5) First fill of lube oil.,6) Acoustic Enclosure complete with all accessories and 7)Testing equipments as specified and directed by the department conforming to IS comprising the Technical Specification.. as per manufacturer.8) first fuel fill, turbo charged developing required BHP 1500 RPM under NTP with 10 % overloading factor, six cylinder engine , with microprocessor based digital display genset engine controller for monitoring, metering, protection, control system etc. conforming to latest Govt. Emission norms CPCB-IV, Test certificate to be provided by the manufacturer.Refer Annexure-A for technical Specification 2 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 3 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) 4 S/I testing and comm. Of three phase 150 KVA 50HZ oil cooled(Transformeroil is to be provided with stabilizer conforming to IS 335,IEC296)) unbalanced type servo voltage stabilizer(Electricfield / COSCO/ Chinar make/ eq. make as approved by EIC) having an inputvoltage ranging from 156V to 415 V ( phase to phase)and balanced output voltage of 415V, +/- 1%.( Test certificate to be provided by the manufacturer) The unit incorporate 5 a) 0-500V moving iron type voltmeter with selector switch. 6 b) A three phase change over switch to read voltage on incoming and output side 7 c) indicating lights 6 No two numbers for each of the motorised units, one for lower limit and other for higher limit. 8 d) six push button control for movement operation of three motorised dimmer units two for each unit i.e one for raise operation and one for lower operation under the conditions of adjustment of auto/mannual selector switch (DPDT) 9 e) Single phase Preventer ( contactor Switchof required rating) Legrand make. 10 f) six potential meter resistance with lock meter two for each phase control, one for sensitivity and other for level control. 11 g) two sets of indication lamps three numbers each to indicate output and input indication 12 h) 20 % over load bearing capacity for one hour. 13 Providing and laying in position reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required (excluding reinforcement). 14 Carrying out Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete, with Mild steel and medium tensile steel bars 15 Design,Supplying,Installation,Testing and Commissioning of Cubical Type double door, outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:42) General Floor Distribution Panel.The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved. Size of wiring for CTS:- 2.5 sqmm, Size of wiring for voltage sensing Metering :-4.0 Sq.mm, Size of wiring of all push buttons, indicating lamps:-1.5 Sq.mm,Types of wires:-PVC insulated 1100V grade ,Multistrand copper conductor Flexible FR-LSH, Hinged Door Earthing:-Device mounted hinged doors connected to cubicles body by means of 2.5 sqmm.green copper flexible wire, confirming to latest govt. Emission norms CPCB-IV, test certificate to be provided by the manufacturer Refer Annexure -A ffor technical specificatiom 16 Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. 17 Normal INCOMING: 18 a)400 Amp TPN MCCB 50 K including spreader links including spreader links, icu=ics=100%( Adjustable thermal and Adjustable magnetic release ) Legrand/Semiens make. 19 b) 600 amp 4 strip bus 1 No. 20 c)Digital A/V meters set/indicators/ selector switches 21 d) onload Change over switch 300 Amp for generator.Front operated. 22 e) 4 No. of Aluminium Bus Bar of 600 Amp. 23 c)Digital A/V meters set/indicators/ selector switches 24 OUTGOING: 25 a)250 Amp TPN MCCB 50 K including spreader links including spreader links, icu=ics=100%( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/Semiensmake. 26 a)200 Amp TPN MCCB 50 K including spreader links including spreader links, icu=ics=100%( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/Semiensmake. 27 a)100 Amp TPN MCCB 36 K including spreader links including spreader links, icu=ics=100%( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/Semiens make. 28 c) space for 18 way MCBs 29 S/L , testing and commissioning of PVCXLPE insulated alluminium armoured cable650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard makeas directed by engineer incharge andmaking end termination with brass compression gland and aluminium lugs of required size. 30 c)185 sq.mm 3.5 core 31 d)150 sq.mm 3.5 core 32 Design,Supplying,Installation,Testing and Commissioning of Cubical Type double door, outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:42) General Floor Distribution Panel.The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.(Wall Mounted) Size of wiring for CTS:- 2.5 sqmm, Size of wiring for voltage sensing Metering :-4.0 Sq.mm, Size of wiring of all push buttons, indicating lamps:-1.5 Sq.mm,Types of wires:-PVC insulated 1100V grade ,Multistrand copper conductor Flexible FR-LSH, Hinged Door Earthing:-Device mounted hinged doors connected to cubicles body by means of 2.5 sqmm.green copper flexible wire,confirming to latest govt. Emission norms CPCB-IV, test certificate to be provided by the manufacturer Refer Annexure -A ffor technical specification. 33 Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. 34 Normal INCOMING: 35 b)250 amp TPN MCCB 36 Kincluding spreader links,( Adjustable thermal and magnetic release) Legrand/ Shinider/L&T/ sample to be approved before installation.. 36 b) 4 No. of Aluminium Bus Bar of 400 Amp. 37 c)Digital meters and phase indicators -1 set. 38 b)200 amp TPN MCCB 36 Kincluding spreader links,( Adjustable thermal and magnetic release) Legrand/ Shinider/L&T/ sample to be approved before installation.. 39 b) 4 No. of Aluminium Bus Bar of 400 Amp. 40 c)Digital meters and phase indicators -1 set. 41 b)100 amp DP MCCB 16 Kincluding spreader links,( Adjustable thermal and magnetic release) Legrand/ Shinider/L&T/ sample to be approved before installation.. 42 b) 2 No. of Aluminium Bus Bar of 200 Amp. 43 c)Digital meters and phase indicators -1 set. 44 OUTGOING: 45 c) 40-63amp TPN MCB 10 KALegrand/ Shinider/ABB/L&T sample to be approved before installation.. 46 c) 40 amp DP MCB 10 KALegrand/ Shinider/ABB/L&T sample to be approved before installation.. 47 c) space for 18 way MCBs 48 Supply installation testing amd comm. of inverter battery 150AH/12V Exide invatubular/ equivalent make as per direction by EIC. 49 Supply, installation, testing and commissioning of Sine Wave Inverter (5 KVA, Rated Power 4000 W), Supports four battery, 24 Month warranty. Safe for sensitive appliances with Sine wave out-put, inverter for high heavy loads like AC, Geyser, Photocopiers, Auto-overload handling capacity. Installation and maintenance friendly. Offers high-quality and reliable power back-up solution for office and homes. MCB for protection from Input mains, Bypass switch for supplying output directly from grid in case of Home UPS fault. Noise-free operation with the help of low harmonic distortion, Intuitive Display to easily understand status of mains availability, battery charging, etc. Comprehensive protection against short-circuit, reverse polarity, battery over-charge, deep-discharge etc. Adaptive Battery charging control system technology (ABCC) enhances battery life by around 70%. Supports a wide range of batteries: Flat Plate, Tubular & VRLA (SMF), preferred make Luminous/ Microtek/ Exide/ eq. make as per direction by EIC 50 Supply and fabrication of angle iron stand of Structural steel work in built up sections, and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
