Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | PART -A |
| 2 | Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A- 9/261) |
| 3 | Desilting the Supply Well, Intake Well / Head Works, Sump of water supply / sewerage works etc. in wet or dry condition includinglifts upto 9 M and lead upto 150 M as required beyond the work site, stacking, spreading, including necessary guarding, etc. complete, as directed by Engineer-in-charge. |
| 4 | Clearing grass and removal of rubbish up to a distance of 50 metres out side the periphery of the area . |
| 5 | Cutting down branches of trees, bushes etc.stacking the material neatly as directed (For Motarable Road) |
| 6 | Excavation for foundation in earth, soil of all types,s and, gravel and soft murum, including removing the excavated material and depositing the excavated materialoutside port area as directed, dewatering, preparing the bed for the foundation and necessary back filling ,ramming, watering including shoring and strutting etc.complete.(Lift upto 3.0 m.) By Mechanical Means |
| 7 | Providing dry/trap/granite/quartzite/gneiss rubble stone soling 15cm to 20cm thick including hand packing and compacting etc. complete. |
| 8 | Filling in plinth and floors with approved excavated material in 15 cm.to20 cm.layers including watering and compacting etc. complete |
| 9 | Providing and laying Cast in situ /Ready Mix cement concrete in M-15 of trap /granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, withfully automatic microprocessor based PLC with SCADA enable dreversible Drum Type mixer/concrete Batch mix plant(Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 10 | Providing and Constructing gabion structure 1Meter high or required section made up of soft mechanically woven hexagonal shaped G.I.wire confirming to IS16014:2012 having zinc plus PVC coating of overall diameter of 3.7 mm and tying lacing wire of 3.2mm with edge wire confirming to overall diameter 4.4mm edges being mechanically selvedge including placing in position ,fitting neatly with trap stone rubble(15to23cm) all loose end s to be securely tied (Excluding transportation) etc.complete.(In Dry condition a nd for under water installation extra cost to be considered) |
| 11 | Providing and laying in situ/ReadyMix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft,strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc .including bailing out water, Steel centering formwork, laying/ pumping cover blocks,compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel)etc. complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant (Panmixer) etc.complete. With fine aggregate(Crushed sand VSI Grade) |
| 12 | Providing and laying Cast in situ/ReadyMix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks ,laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete (Excluding reinforcement and structural steel). with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 13 | Providing and laying Cast in situ/ReadyMix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks,laying/pumping ,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).withfully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 14 | Providing and laying Cast insitu/ReadyMix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork cover blocks ,laying/pumping ,compaction and roughening the surface if special finish is to be provided and curing etc .complete .(Excluding reinforcement and structural steel). with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 15 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis,copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 16 | Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. |
| 17 | Providing flush grooved pointing with cement mortar 1:3 for brickwork including scaffolding and curing etc. complete. |
| 18 | Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints,raking out joints,watering and scaffolding etc. Complete |
| 19 | Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish,to concrete,brick surface,in all positions including scaffolding and curing etc.completed ITEM NO.32.06 SR.NO.953 SSR 2020/2021 |
| 20 | Providing sand faced plaster externally in cement mortar using approved screened sand ,in all positions including base coat of 15mm thick in cement mortar 1:4 using water proofing compound at 1 Kilogram per cement bag curing the same for not less than 2 day sand keeping the surface of the base coat rough to receive the sand faced treatment 6to8mm thick in cement mortar 1:4 finish in gthe surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 21 | Providing and applying plastic emulsion paint of approved quality , colour and shade to new surface in three coat including scaffolding, preparing the surface.(excluding primer coat)etc.complete. |
| 22 | Providing and laying Rough Shahabad Stone Flooring 40mm to 45mm thick and of required width in plain / diamond pattern on a bed of 1:6 C.M .including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete. |
| 23 | Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick required width in plain / diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 24 | Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain / diamond pattern on bed of 1:6 C.M .including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 25 | Providing and laying chamfered cobble rough stone (Hand cut Block Granite stone) of size 100x100x150mm thick and joint to be filled with sand and embedded in concrete , patterns as per detail drawings , allnecessary fixing arrangement etc complete as directed by Engineer-In- Charge. The rate includes cost of chamfered granite cobble stones, sand and labour charges for laying.Concrete shall be paid for separately under relevent item. (Refer sketch 2) |
| 26 | Providing and Laying rubble Stone hammer tooled dressing in Random shapeforPavingofvaryingsizenot lessthan0.30X0.40X0.150to0.200 Meterhavingpaperjoint,inrequired pattern filling the gap in 1:1 Lime mortar over provided bedding including strikingjointcleaningtheresidueandwatering etc, complete. |
| 27 | Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete. |
| 28 | Providing water proof bedding for flooring of Bath and WC 25mm thick in C.M.1:3 including using approved waterproofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling ,curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. |
| 29 | Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb without gutter (asperIRC861983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M .1:2 , including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant |
| 30 | Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. complete. |
| 31 | Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60x44.75mm, 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150mm x 44.5mm x 3.00 mm thick to prails 47.62x44.45mm x3.00 mm thick, vertical style 47.62x44.45mm, 3.00 mm thick and for shutter plain glass panes 5mm thick for top panels and 12 mm thick both side laminated phenol bonded particle board panels for bottom panels etc., I.S.I.mark, heavyduty, Hydraulic floorspring of 150Kilogram capacity, having heavy duty concealed lock, necessary beading, glazingclips, PVCgaskets, 250mm length aluminium tower bolts, 150mm dia. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and equipment etc.complete |
| 32 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. |
| 33 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. |
| 34 | Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. |
| 35 | Providing and laying ceramic tiles of having size 30 cm. x 45 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 36 | Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use) |
| 37 | Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete (Prior approval of sample and brand by Ex. Engr. is necessary before use) |
| 38 | Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall |
| 39 | Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. a) both side polish |
| 40 | Providing and laying machine cut machine polished shahabad Stone slabs 20to25mm thick for treads and risers of steps and staircases,with rounded nosing fo rthe treads on a bedof1:4cementmortarincludingcementfloat,fillingjointswithneatcementslurry,curing,polishingand cleaning etc. complete. |
| 41 | providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m ) |
| 42 | Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. |
| 43 | Providing and fixing 25mm diameter concussion push button type brass/gun metal self-closing tap including necessary socket complete |
| 44 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixingof accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 1000 to 20000 liters |
| 45 | Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 46 | Providing and laying 100mm dia salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying ,jointing (including excavation and refilling the trenches) complete. |
| 47 | Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75 kg with lid and frame fixed in cement concrete. |
| 48 | Providing and fixing Ductile iron manhole cover of light/medium/heavy duty with frame of any size over inspection chamber etc. complete (Prior permission of S.E. is to be obtained before inclusion of this item in the estimate) |
| 49 | Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. |
| 50 | Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kg/Smt. |
| 51 | Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating,fixtures,errecting,necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete |
| 52 | Providing and laying in position flooring of telephone black / Amba White/Catbary brown/ Rubyred/ Ocean Brown granite stone of approved shade and size 18mm to 20mm thick on bed 1:6 cement morta rincluding cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. |
| 53 | GARDEN SOIL : Supplying on site garden soil well sieved 90% to pass through LS. sieve of 10 mm sixe free from stones rubbish like dried grass roots and other such materials. The soil should be freshfrom quarry. The colour of the soil generally be red. The soil will be measured by measuring box. (Farma) (Item includes Royalty charges., Transporting, loading unloading etc.) lead chargesfor 20 k.m. is considered (3:1 proportion with Manuer) |
| 54 | Planting Lawn on Soft/Hard surface: Providing and filling Red Hill Earth & Cow Dung Manure mixing in 2:1 proportion, watering to the depth of 1\" three times, weeding after every watering before plantation of the grass, leveling, rolling after proper compaction, planting of good quality lawn suckers bydibbling method in staggered fashion at specified intervals including transport & unloading. Watering and proper mowing etc. maintaining for 1 month aftercompletion of plantation and replacement of casualties till 1 month. |
| 55 | Planting Shrubbery on Soft/Hard surface: Filling Red Hill Earth & Cow Dung Manure in the excavated area mixing in 2:1 proportion, watering, weeding after every watering before planting the shrub, leveling, providing and planting well grown, healthy, bushy shrubs including transport and unloading as per specified variety and sizes, planting at desired location and specified distances, maintaining for 1 month after completion of plantation and replacement of casualties till 1 month. |
| 56 | Planting Creepers/Climbers on Soft/Hard surface: Filling Red Hill Earth & Cow Dung Manure in the excavated area mixing in 2:1 proportion, watering, weeding after every watering before planting the shrub, leveling, providing and planting healthy, bushy creepers including transport and unloading as per specified variety and sizes, planting at desired location and specified distances with appropriate staking, maintaining for 1 month after completion of plantation and replacement of casualties till 1 month. |
| 57 | Planting Trees on Soft/Hard surface (Individual): Filling of Red Hill Earth, Cow Dung Manure & good earth from excaveted pit in the excavated pits mixing in 2:1:1 proportion, watering & providing well grown trees with minimum average girth of 2\" and minimum height of 10\" above finished level after plantation of specified variety , at desired location & at specified distances. Achieving finished grade level. Planting the tree with appropriate anchoring, leveling the top soil surface as specified after plantation, staking to balance the tree. Including transport to the site & planting , preparation of tree basin, watering & maintaining for 1 month after completion of plantation and replacement of casualties till 1 month. |
| 58 | Providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling the middle portion with B.C. soil (in gunny bags if required). Providing impervious / semipervious materials on both sides of B.C. soil (in gunny bags if required) including ramming, compacting to the satisfaction of Engineer-in-charge till the completion of work including dismantling coffer dam after completion of works and disposing off the material as directed by the Engineer-in-charge.Note : Pay line maximum. Top width payable shall be 2 Mtr. and maximum payable side slopes shall be 1.5 horizontal to 1 vertical, if the constructed top width of the side slopes are less, then the measurements at actual are payable. Extra top width or flat slopes are not payable. Contractor is free to use ballies, plastic sheets, piles, pipes, CGI sheets for supporting hearting materials instead of impervious/ semi-pervious hearting materials for which no extra payments shall be payable. 30% payment shall be withheld for dismantling of coffer dam. This foot note shall appear in tender condition. (Type section is shown on last page of type design section of CSR). |
| 59 | Providing and fixing Bench in ferrocate wood effect with required sand, cement proportion, pigmentation & two coats of apex paints with artistic labour work, completely as per drawing/ photografs as directed by engineer incharge 6\"8\"(L) X 19\"(W) with back support 6\"8\" (L) X 11\" (W) |
| 60 | Providing and fixing sinages in ferrocate wood effect with required sand, cement proportion, pigmentation & two coats of apex paints with artistic labour work, completely as per drawing/ photografs as directed by engineer in charge 1.52M(L) X 1.21M(W). |
| 61 | Providing and fixing Dust Bins in ferrocate wood effect with required sand, cement proportion, pigmentation & two coats of apex paints with artistic labour work, completely as per drawing/ photografs as directed by engineer in charge 0.90(L) X 0.60(W) X 1.01M(H). |
| 62 | Sculpture Supply and fixing of external steel structure by using 6mm/8mm/10mm/12mm steel with welded mesh chicken mesh to form the hollow structure for animal shapes or any other required shape approved by an Architect. The steel structure should be welded or by using hand fixing of binding wires. The sculpture structures would be hollow from inside. The structures will have layers of cement ,sand and waterproofing compound by hand crafting. One structure will be principally approved by Architect. Final finishing of ferro crete with synthetic oxide pigment , Apex paint and PU Coating by spraying/ hand brushing will be done. Steel base will be led on RCC concrete foundation. Size: 8-10 Feet (Height) x 3-4 Feet(Length)x2-3 Feet(Width) |
| 63 | Bioremediationoflakefor18 months |
| 64 | Analysis of lake water for 5 parameters viz.pH,DissolvedOxygen,Free ammonia(asN),BiochemicalOxygen Demand(BOD),Colourand Odour on a quarterly basis. |
| 65 | Providingpowderbasedmicrobial product“T1BPondCleaner”forlake bioremediationalongwithmonthly application |
| 66 | Labours for installation of aeration unit , application of bio product, physical cleaning of lake water and collection of water samples foranalysis. |
| 67 | Solar lights-All in one lights inclusive- 25 Watt led with mppt ccu +24 Ah lifepo4 battery, +75 WAT Mono spv, motion sensor, Dimming clampsHeight=6 m pole |
| 68 | Bio Engineering works (on Contour Bunds) |
| 69 | Bio log - Providing & laying of 12\" Dia Bio Logs withFixing 2\"X2\"X32\" Bamboo Pegs at 3\" c/c & tying coirlogs as directed by Engineer site‐in‐charge |
| 70 | Jute Bag Toe Wall: Supplying & laying in position of Jute gunny Bags filled with Murum as toe in two rows,bamboo peg & place weep hole as dircted by engineer sit‐in‐charge |
| 71 | Coir Bed :Providing & Wraping Coir bed of reqired width over Jute bag & fixed using Bamboo pegs / U Pins |
| 72 | Stumping: Providing vegetative stumping of selected plant species @ 3\" c/c |
| 73 | Ashlar stone face work Providing and Laying rubble Stone hammer tooled dressing in Random shape for Face work of varying size not less than 0.30X0.30 X0.150 to 0.200 Meter having paper joint, in required pattern filling the gap in 1:1 Lime mortar over provided bedding including striking joint cleaning the residue and watering etc, complete. |
| 74 | IRRIGATION |
| 75 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete |
| 76 | Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per ISspecification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspectioncharges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). (Section-I(II) |
| 77 | PVC Pipe 110 mm x 10 kg/cm2Make - Jain / prince /Finolex / Kisan/Supreme |
| 78 | PVC Pipe 90 mm x 10 kg/cm2Make - Jain / prince/ Finolex / Kisan/Supreme |
| 79 | PVC Pipe 75 mm x 10 kg/cm2Make - Jain / prince / Finolex / Kisan/Supreme |
| 80 | PVC Pipe 50mm x 10 kg/cm2Make - Jain / prince /Finolex / Kisan/Supreme |
| 81 | PVC Pipe 63 mm x 10 kg/cm2Make - Jain / prince / Finolex / Kisan/Supreme |
| 82 | PVC Pipe 32 mm x 6 kg/cm2Make - Jain / prince / Finolex / Kisan/Supreme |
| 83 | PVC Ball Valve 32 mm (Teflon seal) Make - Jain / Plasson / Kisan /prince |
| 84 | PVC Ball Valve 40 mm (Teflon seal) Make - Jain / Plasson / Kisan / prince |
| 85 | PVC flush valve 75 mm Make - Jain / Plasson / Kisan / |
| 86 | PVC flush valve 40 mm Make - Jain / Plasson / Kisan / prince |
| 87 | Provding , Fixing testing &commissioning of filtration unit consisting of sand , screen filtter for a filttering capacity of disgned flow with manual back flush unit comforming tp IS sefications complite with all fittings , including all labours if any clean master 25 m3/hrMake - Jain /Amiad / prince / Kisan/ Metafim |
| 88 | 16 mm In-Line Drip Tubing of class-2 with in-built 4 LPH Pressure Compensating (PC) emitters spaced @ 0.6 mtr. Make - Jain /Netafim / prince / Finolex / Rain Bird |
| 89 | 16 mm plain drip Tubing of class -2 Make - Jain /Netafim / Finolex / prince / Rain Bird 19251 0 4-H-3(added 10% per year in Prodata Basis) |
| 90 | 8 Stations Outdoor Irrigation Controller with 230VAC internal TransformerMake - Hunter /Toro / Nelson / Rain Bird |
| 91 | PVC Service saddle 63 mm x 1/2 \"\", 10 kg/cm2 Make - Jain / Finolex / Kisan / prince |
| 92 | PVC Service saddle 63 mm x 3/4 \"\", 10 kg/cm2 Make - Jain / Finolex / prince/ Kisan |
| 93 | Elbow 16 mm Make - Jain / Netafim/ prince / Finolex |
| 94 | Turbo Line Tee 16 mm Make - Jain / Netafim / Finolex / prince |
| 95 | Tee 16 mm Make - Jain / Netafim / Finolex / prince |
| 96 | Lateral Endstop (8 Shape) 16 mm Make - Jain / Netafim / Finolex/ prince |
| 97 | G. I. Service Saddle 63 × ½\"&2\"Ø |
| 98 | G. I. Service Saddle 75 × ½\"&2\"Ø |
| 99 | Vertical Openwell Submersible Pump Set -7.5 HP/ - 2 stage Head - 49 to 21.5 mtrsDischarge - 200 to 1000 LPM Make - KSB, Kirloskar, Crompton(Pump set P-164) |
| 100 | Solenoid Valves of size 1\"\"with flow control and Female BSPinlet-OutletMake - Hunter /Toro / Nelson / Rain Bird |
| 101 | Solenoid Valves of size 1.5\"\"with flow control and Female BSPinlet-OutletMake - Hunter /Toro / Nelson / Rain Bird |
| 102 | 1 sq mm copper cable for Solenoid valves (Havells HRFRPVC) (Quotation) |
| 103 | 2C x 14AWC Cable Plastic Conducting Pipe 25 mm ISI Mark - Make - Diamond, finolex |
| 104 | 3/4\"Quick Coupling Valve (QCV) of solid brass construction Make - Jain /Harrit / Rain Bird |
| 105 | 3/4\"QCV Key with hose swivel Elbow arrangement of solid brass constructionMake - Jain /Harrit / Rain Bird |
| 106 | 1.5\"Plastic body Hydraulic Pressure Reducing Valve with Stainless steel spring, shaft &nylon fabric diaphragm. Make - Bermad / Hunter / Nelson/ Rain Bird |
| 107 | provding and fixing in position and joiting high performance C.I air vavles for water combination type (kinetic air vavle along with automatic air vavle) dobble ball doubble orifice with stainless steel ball , tamper proof air vents rolling seal mechanism for air realease and anti vaccum application designedfor 16kg. per Sq.cm Working pressure and tested for 20kg forper sq.cm pressure (rate to include cost of gaskats , bolt , nut , and any other material required for joiting and its transportation etc. Excluding GST levied by GOI and GOM in all respectC.I ARV FLFF PN 1.650MM dia |
| 108 | Plumbing all 10KG per cm.sq ISI Mark PVC pipe and Fittings make prince/ finolex / equivalent NR Valve=75mm Non-Return Valve. |
| 109 | Supplying &erecting automatic control panel for 3 Ph, 415volt, A.c. Submersible/centrifugal pump set upto 7.5 HPconsisting of DOL starter having relay range 9-14 AMP,S.P.P.,Combined ammeter/voltmeter, phase indicating lamp enclosedin CRCA powder coated Vibration proof enclosure with IP 54protection. Control Panel should offer single phasing, phasereversal, phase imbalance etc |
| 110 | Valve Boxes 10\", Round shape with openable top green cover Make - Jain /Toro /Nelson/ Rain Bird |
| 111 | Valve Boxes 12\", Rectanglar shape with openable top green coverMake - Jain /Toro /Nelson/ Rain Bird |
| 112 | 1\"\" Gate Valve of Gun metal construction Make - Zoloto/Leader/Tata make |
| 113 | providing , fixing , testing and Commissioning of filltration unit consisting of sand , screen filtter for a filering capacity of design flow with manual back fulsh unit conforming to IS sepecification completewith all fittings , inculding all labours , if any make JAIN/ amide/ kisan/ metafim / princeScreen Filter Y Type 2.5\"metal - 40cumh IS : 12786 |
| 114 | providing , fixing , testing and Commissioning of filltration unit consisting of sand , screen filtter for a filering capacity of design flow with manual back fulsh unit conforming to IS sepecification completewith all fittings , inculding all labours , if any make JAIN/ amide/ kisan/ metafim / prince Media Filter 2.5\"Horizontal Is 14606 BSP Flanged 100 mic Maximum Operating Pressure 10 kgf.SIL |
| 115 | Grommet Take Off 13 x 16 mmMake - Hunter /Toro / Nelson/ Rain Bird |
| 116 | Supplying &erecting gun metal gate valve of size 25mm dia complete as per specification no. FF-VL/GV |
| 117 | Supplying &erecting gun metal gate valve of size 50mm dia complete as per specification no. FF-VL/GV |
| 118 | Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia.pad cock valve, and G.I. pipe, elbow etc. complete as perspecification no. |
| 119 | PVC Single Union Valve 3/4 \"\" Male and FemaleMake - Hunter /Toro / Nelson/ Rain Bird |
| 120 | Supplying and fixing of Y-stainer having 100 mm diameter.Water filter is like watchdog to protect system form Clogging Hazrads. In this sand seperators to remove silt, sand from water and Media Filter removes organic impurities like algae, trash, leaves etc. |
| 121 | Supply and Installation Of fertigation Unit. The Injection Of Fertizers/Chemicals like insecticides, Herbicides and Fungicides into an Irrigation system, It Should be more Controlled and regulated process. Fertigation unit should involves all the necessary Arrangements of mixing, injection, fertigation tank and Controlled supply in All the Aspect to Cover all the Irrigation Area |
| 122 | Providing and filling in sand boxing in pipeline or for foundation with sand of approved quality including watering andcompaction, etc. complete. (Bd-A-13/264) (Section E, Pg No: 46) (MJP SSR 2021-22 item no.20 |
| 123 | Spray Pop-up sprinkler 6\"\" height with Replacable nozzle of radius3 to 5 m @ 2.1 bar, Q-0.12 to 0.30 lps (for full circle)with SAMMake - Hunter / Toro / Nelson / Rain Bird |
| 124 | Flow meter 100MM |
| 125 | Supplying, erecting &terminating XLPE armoured cable 3core 16 sq. mm. aluminium conductor with continuous5.48 sq. mm. (12 SWG) G.I. earth wire complete erected withglands &lugs, on wall/ trusses/pole or laid in providedtrench/ pipe as per specification no. |
| 126 | Electrification for toilet |
| 127 | Supplyingexhaustfanof1440 RPMof300mm(12\")sizewithbracket blades complete forlight duty suitable tooperate on 230V 50Hz,ACSupply. |
| 128 | Supply of round/square recess/surface mounted rolling type LEDDown light with10-12WGU 10 LEDLamp Rib Fabricatedfromdiecast aluminiumwithwhitepowder coated prewired tomains connector & has swivelling unit of aluminiumdiecasteyeball&LEDLamppositionretainedby circularwirespring,withLifeof25000burninghours&70% lumen maintenancewith CRI> 80. Power Input: 220-240V @50/ 60Hz &Powerfactor>0.9along with CE approved. 2years Warrantyagainstany manufacturingdefectworking under standardelectrical condition |
| 129 | Supplying & fixing - flexible LEDStrip Light ..... W Power consumption in 5 ms length CCT6500 degree K, CRI> 70%. efficacy>80 lumen per W, life> 25000 burning hours and CompliancetoIS 10322/IEC60598,LM79&LM80.The LEDare drivenby HFelectronic drivernonintegrated, withPF>0.95,powerlossshou1d<5%oflampWage. , shortcircuit& opencircuitprotectiontobeintegratedinthecircuit,THDless than 20%,Life asper LM79.Theoperatinginputvoltageshould bebetween130to275V.BISApprovedwith2yearsWarranty againstany manufacturing defectworkingunder standard electricalcondition. |
| 130 | SupplyingandfixingregularMCBDouble Doordistributionboardson wall / wood board / flush mounting using required clA,bolts, nutsetc., withprovisionforfixingsuitabletypecapacity MCB\"ssinglephase/ 3phase/ singledoorwithpowdercoated painting Made out of14 SWG MSenclosure. 8way SP&N |
| 131 | Supplying & fixingminiature circuit breakers 6—32A SP on existing MCB distributionboardsusingnecessaryfixingmaterials and \"C\" type curve, indicator ON/OFF, energy cross-3with Shortcircuitbreaking capacityof10Kandcomplete wiringas requiredconfirmingto IEC 60898 6-32A SP. |
| 132 | Supplying & fixingminiature circuit breakers 32A DP on existing MCB distributionboardsusingnecessaryfixingmaterials and \"C\" type curve, indicator ON/OFF, energy cross-3with Shortcircuitbreaking capacityof10Kandcomplete wiringas requiredconfirmingto IEC 60898 6-32A DP |
| 133 | SupplyingheavygaugePVC ConduitPipe25mmdia 2 mmthickwithsuitable sizebends, metaljunction boxesadhesive pasteetc.,bygroovecuttinginthewall andfixing bybracingU orIhooks andcementplasteringuptothewallsurfaceand run with 18 SWGGIfish wire runthroughoutthe conduitwherevernecessary.(SR ELECT 2022-23ELECT 1.1.2) pg no.01 |
| 134 | SupplyingheavygaugePVC ConduitPipe32mmdia 2 mmthickwithsuitable sizebends, metaljunction boxesadhesive pasteetc.,bygroovecuttinginthewall andfixing bybracingU orIhooks andcementplasteringuptothewallsurfaceand run with 18 SWGGIfish wire runthroughoutthe conduitwherevernecessary. |
| 135 | Supplying and wiringabove6m upto10mfromtappingpointtooutlet via switchesboxin existing PVC Conduit/ casingcappingcasingcappingusing2x1.5mm° (Phase&Neutral) & 1x1.0mm°(Earthwire)FRLsmulti strandPVCinsulatedcopperwire(confirmingto15-694:and latestamendments)withoutcontrolswitchshallbefixedonthe existingplasticsheet/gangbox,the other end of the wiresshallbeterminatedwithsufficientlooselengthinawood/ PVCround block.completefor each outlet. |
| 136 | Supplying anddrawing FlexibleMulticoreCablemanufactured 3CX1.5 mmwithelectrolyticgradeflexiblecopperwithlowconductor confirming toIS 8 130- 1984and(Virgin)PVC insulation sheathed suitable forworking voltage upto 11O0V as perIS- 694:2010 |
| 137 | SupplyingAnd fixing/ replacing of16/6A combinedp1tig and socket with control switchelectricalaccessorieson existing switchboard. |
| 138 | Supplyingandfixingof 6A OneWay Switch modular switch&connectedaccessories on existing modular switch plateasper IS3854 andIS1293. |
| 139 | Supplyingandfixingof 6A ThreeWay socket &connectedaccessories on existing modular switch plateasper IS3854 andIS1293. |
| 140 | Supplyingandfixingof 16A OneWaySwitch modular switch&connectedaccessories on existing modular switch plateasper IS3854 andIS1293. |
| 141 | Supplyingandfixingof 6/ 16A Universal Socket &connectedaccessories on existing modular switch plateasper IS3854 andIS1293. |
| 142 | Supplyingand flush mounting powder coated/galvanized 10-12 Waymetalbox suitablefor mountingmodularswitchplates.Thebox should be firmly flush mounted after due groove cutting in Brick/ Stone/ C.C wall |
| 143 | Supplyingandfixingsuperiorqualitymodularswitchmounting 10-12 Modulepolycarbonateplatewithnecessarysupportingbackplatewith requirednos.ofmachinescrews,boltsnutsetc.,completeon the existing metal/ PVCbox. |
| 144 | Supplyingpushbuttonoperateddirectonlinestarterwithan antiweldsilvercadmiumoxidecontactorwithreplaceable fixedand moving contactsand bimetallicthermaloverload relay help in anticorrosion treated sheet steel or iron clad enclosure and fixing the sametosuitable capacitywiresfor 230/440 VI/3phasemotor upto5 HP. |
| 145 | Supplying anddrawing 3C x 2.5 mm 2 flatPVC sheathed submersible pumpcablemanufactured withelectrolytic grade copperwith flexiblecopperwithlowresistance conductorconfirming to13:8 130-1984andvirgingradePVC insulationandpowder coating extruded PVCsheathed suitable for working voltage upto1100 Vasper 15-694:2010. |
| 146 | Supplying, erecting & terminating PVC armoured cable 4 core16sq mm aluminiumconductorwith continuous 5.48sqmm(12SWG)G.I.earth wire completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL CSR. NO. 7-1-16 2021-22) Pgno.126 |
| 147 | Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnelwith a wire mesh for watering and brick masonry block C.l. cover with minimum25 kg Carbon based environment friendly back fill Ground Enhancing compoundcomplete with all materials, testing & recording the results as per specification noESE -LA |
| 148 | Supplying and erecting Copper Strip of required size usedfor earthingon walland/oranyotherpurposewith necessary copperclampsfixed on wallpaintedwithbituminouspaintinanapprovedmannerwithjointsrequired.as per specification No (EA-EP). |
| 149 | Supplyinganderecting G.I.stripofrequiredsizeusedfor earthing on wall and/or any other purpose withnecessary GI clampsfixedonwall paintedwithbituminouspaintinan approved manner with joint required. as per specification No (EA-EP). |
| 150 | Supplying and laying (including excavation) 50 mm outside dia. double wall corrugatedpipes(DWC)ofHDPEforenclosingcablebelowground/road surface, to required depth complete. |
| 151 | Food Court ( prefabricated FRP structure - 3m x 4.5m )with FRP frame work, FRP panels & WPC roofing panels, fixed onconcrete footing etc. |
| 152 | Pause point -gazibo ( prefabricated FRP structure - 3m x 3m )with FRP frame work,& WPC roofing panels fixed on concrete footingetc. |
| 153 | Bird Hides( prefabricated FRP structure with FRP wall panel & roof panel, connecting plate to footing, openings for bird watching, low height door in FRP, shape & colour of the structure is oraginc camouflage with nature. |
| 154 | Nature trail - |
| 155 | Nature trail - Supplying and laying laterite stones upto 20kilogram for Filter/Core layer including conveying with all the leads,lifts,laying in required lines,level,slope as per drawing including necessary equipments and machinery as directed byetc.complete in tidal conditions. |
| 156 | Providing and erecting chain link fencing 1.6M.height with G.I. chain link of size50x50mm,8 gauge thick and fixed 75mm above ground level on vertical M.S.Angles of 40x40x6mm size,includind excavating pits for foundation and embedded in C.C.block of 1:4:8 mix of size 450x450x670mm.at1.75M.c/c with iron bar 16mm dia ashold fast including welding link with angle frame at30cmc/c withnuts and bolts and horizontal M.S.Angles at top and bottom of25x25x5mm size and vertical M.S.flat35x5mm and 25x5mm horizonta lincluding cross supporto f40x40x6mm angles both sideat every corneror bendemb eddedin concrete blocks of1:4:8of size450x450x670mm including 3 coats of oil painting etc. complete. |
| 157 | TOTAL STATION SURVEY - Carrying of detailed topographic survey by using to talstation along the existing or new road including taking L-section and cross section at every 30 meter ROW,taking at least 10 spot levels per cross section,picking up all existing details inside the Row like electric telephone line,encroachments,structuresetc.connecting all the primary total station control points by G.I.S.Benchmarks level or whichever available with department using autolevel and preparing AutoCAD plan by using above data taking out 1set of black and white print out on 50micron polyster film sheet A2 size and 2sets of coloured print out on A2 size submitting soft copy all data on CD. Plain Terrain New Alignment |
| 158 | PART-BArchitecture, Designing & Drawing, Presentation, Detailing, Estimation and Material Selection for rejuvination of lake. Project Managment consultancy for day to day supervision of work, quality control at site.Coordination with contractor , client and vendors involved in project. The 30% payment will be released after acceptance of presentation & submission of architectural drawingand balance installments will be equally paid on monthly basis. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
