E Tender For Furniture Work In The Eligibility Department In Muhs Campus Nashik-1 391.61 Sqm Scrapping the old plastered internal surface with sand paper and coating the entire surface with mixture of whiting or glue and linseed oil including scaffolding etc. complete as directed. 2 7.00 No Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. 3 1.66 Sqm Providing and laying telephone black / Amba White / Cadbury brown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. 4 391.61 Sqm Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. 5 391.61 Sqm Providing and applying priming coat on concrete/ masonry/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 6 391.61 Sqm Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. 7 00.00 Sqm Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the understructure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25x50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 millimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cutouts, painting including labour, material, lifts etc. all complete. 8 25.95 Sqm Providing and fixing in position aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineer in charge with all necessary aluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete. B) Powder Coated 9 48 Point Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW 10 16 Point Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG PW/CW 11 25 Point Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW 12 4 Nos Supplying and erecting PVC Surface modular double mounting plate 1 module complete duly erected. 13 6 Nos Supplying and erecting PVC Surface modular double mounting plate 2 module complete duly erected. 14 35 Nos Supplying and erecting PVC Surface modular double mounting plate 3 module complete duly erected 15 3 Nos Supplying and erecting PVC Surface modular double mounting plate 4 module complete duly erected. 16 35 Nos Supplying and erecting PVC Surface modular double mounting plate 6 module complete duly erected. 17 4 Nos Supplying and erecting PVC Surface modular double mounting plate 8 module complete duly erected. 18 2 Nos Supplying and erecting PVC Surface modular double mounting plate 12 module complete duly erected. 19 124 Nos Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. 20 4 Nos Supplying and erecting modular type Two way switch 6A / 10A (2 Module), duly erected on provided plate and box with wiring connections complete. 21 8 Nos Supplying and erecting modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete. 22 108 Nos Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. 23 4 Nos Supplying and erecting flush type shockproof plug socket 6A & 16A (6 pin) with 16A switch combined with indicator lamp and fuse with gang box on wooden board. 24 35 Nos Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. 25 1 Nos Supplying and erecting modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete 26 16 Nos Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete. 27 2 Nos Supplying and erecting modular type bell indicator, duly erected on provided plate and box with wiring connections complete. 28 1 Nos Supplying and erecting modular type buzzer 220 / 250V, duly erected on provided plate and box with wiring connections complete. 29 35 Nos Supplying and erecting modular type computer Jack RJ45 with safety shutter, duly erected on provided plate and box with wiring connections complete. 30 15 Nos Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box. 31 5 Mtrs Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 32 5 Mtrs Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 33 25 Mtrs Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 34 75 Mtrs Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 35 75 Mtrs Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 36 125 Mtrs Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 37 145 Mtrs Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON. 38 165 Mtrs Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON. 39 16 Nos Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF 40 2 Nos Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF 41 6 Nos Supplying & erecting ready to use Retrofit T8 LED 18 / 20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary. 42 2 Nos Supplying and erecting corridor/passage light fitting (2 feet) including 9W LED lamp, comprises of extruded channel in plastic silver grey colour & with same plastic end cap on provided PVC block / wooden board. Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty Supplying & erecting 12 WAY 7 SEGMENT DB Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1 Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB Supplying, erecting & marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete. Prolite Fire Extinguisher sign Cat No. FE 6 (SIZE: 200 x 200mm) 2 Megapixel CMOS Network IP based Dome/Bullet Camera, 3D DNR, 32 Kbps – 8 Mbps, Max. Resolution 1920 x 1080, Power Supply PoE (802.3af) eq to Hikvision DS-2CD2120-I NVR-32-ch video & 1-ch audio input, 2 SATA, 1080p Resolution,3USB, 12 VDC,HDMI & VGA Output, connectable HDTVI, analog & IP camera support metal body 22 HD SAMSUNG FULL HD DISPLAY monitor Hard Disk- 4 TB Survelliance WD Plastic Gangbox 4*6 Supplying, fixing, and configuring 24 ports, POE switch in provided rack as per specification No. WG-NWC/ENS 8 Port Gigabit LAN Switch Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC. Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON. 16 U rack -Top & Bottom cover with cable entry provision.,Top cover with fan position.Sides ventilated,Front Glass Door with locking Facility,Fan 90CFM 230V A/C,PDU 4 Sockets 5AMP,19 Horizontal cable Manager -1U M.S, Supplying & erecting 20 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON. Dismantling of existing wiring work. The dismantling should be done properly, so that maximum material can be reused. This job shall include dismantling of all electrical wiring work, switchboards, DB boxes etc. The dismatled material to be stored in a location decided by the Institute. Providing & fixing 19 mm plywood panelling for Door Frame including finishing in Veener with melamine polish as directed by Architect . etc complete Providing and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. Providing & fixing 12mm thick Toughned Glass Door of required size with necessary patch fittings Door Handle, locking arrangement , floor spring etc. complete as detailed design & drawing provided by Architect in charge etc complete Medium Height Partition @ 1800/1200HTTILEBASEDPARTITIONSYSTEM:-Tile based Aluminum partition system of 1800/1200 mm ht. made of 60 mm thk aluminum frames having two separate raceways for laying electrical & computer wiring. The wire management shall be through to the raceway to be fitted at bottom of partition and other immediately below of worktop with hook on type raceway cover for easy access of wires. Frames to be joined by aluminum connectors with M6 x 16 pan- head machin screw and washer with aluminum post cover. Post cover of snap on fashion to be connected on aluminum connectors. All visible aluminium to be inanodized finish. The top / exposedsides of the frame and posts should be covered with horizontal /Vertical trim and caps made of Aluminum in anodized finish inorder to enhance its look. Uppertiles of partition to be in Soft Board or Markertile of 9 mm. thk., and prelaminated particalboard lower tiles in laminate finish of 9 mm. thk. on both the sides. Single Faced Fixed Unit for Compactor 2150mmH x 1830mmW x 457mmD Providing and fixing Single Faced Fixed Unit for Compactor 2150mmH x1830mmW x457mmD- SEFRAME: Base Frame shall be fabricated in channel Type fro mminimum 2.5 mm thick MS Sheet Size of Channel 25mm x 100mm x 45mm. GUIDERAILS: The guiderails shall be made out of 28mm Bright bar placed on 1.2mm thick M.S. Plate which will be above the floor and are as per the international standard of safety. SUPERSTRUCTURE: Superstructure of the Mobile storage system will consist of knockdown type panels. All the components such as shelves, front panel, end panel, vertical rear panel, central partitionetc. Will act as an integral member of the Unit. SHELVES: Shelves made of 22 SWG thick Prime Quality C.R.C.A. having 10 folds each will be provided each designed to carry a U.D.L.of 70 Kilograms. VERTICALPANEL: Vertical panel consists of the front, Centre & rear panel shall be made out of 20 SWG thick C.R.C.A. Prime quality Mild Steel & designed to take the load of shelves. DRIVECOVERPANEL: Made out of 22 SWG thick C.R.C.A. prime quality Steel to cover the entire drive mechanism. CENTREPARTITION: The Centre partition will comprise of a full C.R.C.A. prime quality Mild Steel 22 SWG Sheet. LOCKING: System will be provided with individual rack locking as well as centralised locking arrangement on the last unit when all units are brought together, central lock when operated gets locked with the floor & does not allow access to the units. DRIVEMECHANISM: Driving Mechanism will be provided externally supported on special gradeanti-friction bearing to have smooth & effortless movement. Entire mechanism or gear & sprockets shall be in corporated within the front panel provided in the front of the unit within an area of 1000mmx 200mmx 60mm. DRIVINGWHEEL: Fully Powder Coated threepronged drive wheel for bettert or que & free movement of the rack over the guiderail. INDEXINGARRANGEMENT: Acrylic cardholders provided on the front panel for easy identification & retrieval. FINALFINISH: Powder Coating (8 tanks process with 70 microns). Single Faced Mobile Unit for Compactor 2150mmH x 1830mmW x 457mmD ProvidingandfixingSingleFacedMobileUnitforCompactor2150mmHx1830mmWx457mmD-BASEFRAME:BaseFrameshallbefabricatedinchannelTypefromminimum 2.5 mm thick MS Sheet Size of Channel 25mm x 100mm x 45mm. GUIDERAILS: The guiderails shall be made out of 28mm Bright bar placed on 1.2mm thick M.S. Plate which will be above the floor and are as per the international standard of safety. SUPERSTRUCTURE: Superstructure of the Mobile storage system will consist of knockdown type panels. All the components such as shelves, front panel, end panel, vertical rear panel, central partitionetc. Will act as an integral member of the Unit. SHELVES: Shelves made of 22 SWG thick Prime Quality C.R.C.A. having 10 folds each will be provided each designed to carry a U.D.L.of 70 Kilograms. VERTICALPANEL: Vertical panel consists of the front, Centre & rear panel shall be made out of 20 SWG thick C.R.C.A. Prime quality Mild Steel & designed to take the load of shelves. DRIVECOVERPANEL: Made out of 22 SWG thick C.R.C.A. prime quality Steel to cover the entire drive mechanism. CENTREPARTITION: The Centre partition will comprise of a full C.R.C.A. prime quality Mild Steel 22 SWG Sheet. LOCKING: System will be provided with individual rack locking as well as centralised locking arrangement on the last unit when all units are brought together, central lock when operated gets locked with the floor & does not allow access to the units. DRIVEMECHANISM: Driving Mechanism will be provided externally supported on special gradeanti-friction bearing to have smooth & effortless movement. Entire mechanism or gear & sprockets shall be in corporated within the front panel provided in the front of the unit within an area of 1000mmx 200mmx 60mm. DRIVINGWHEEL: Fully Powder Coated threepronged drive wheel for bettert or que & free movement of the rack over the guiderail. INDEXINGARRANGEMENT: Acrylic cardholders provided on the front panel for easy identification & retrieval. FINALFINISH: Powder Coating (8 tanks process with 70 microns). BASEFRAME:BaseFrameshallbefabricatedinchannelTypefromminimum 2.5 mm thick MS Sheet Size of Channel 25mm x 100mm x 45mm. GUIDERAILS: The guiderails shall be made out of 28mm Bright bar placed on 1.2mm thick M.S. Plate which will be above the floor and are as per the international standard of safety. SUPERSTRUCTURE: Superstructure of the Mobile storage system will consist of knockdown type panels. All the components such as shelves, front panel, end panel, vertical rear panel, central partitionetc. Will act as an integral member of the Unit. SHELVES: Shelves made of 22 SWG thick Prime Quality C.R.C.A. having 10 folds each will be provided each designed to carry a U.D.L.of 70 Kilograms. VERTICALPANEL: Vertical panel consists of the front, Centre & rear panel shall be made out of 20 SWG thick C.R.C.A. Prime quality Mild Steel & designed to take the load of shelves. DRIVECOVERPANEL: Made out of 22 SWG thick C.R.C.A. prime quality Steel to cover the entire drive mechanism. CENTREPARTITION: The Centre partition will comprise of a full C.R.C.A. prime quality Mild Steel 22 SWG Sheet. LOCKING: System will be provided with individual rack locking as well as centralised locking arrangement on the last unit when all units are brought together, central lock when operated gets locked with the floor & does not allow access to the units. DRIVEMECHANISM: Driving Mechanism will be provided externally supported on special gradeanti-friction bearing to have smooth & effortless movement. Entire mechanism or gear & sprockets shall be in corporated within the front panel provided in the front of the unit within an area of 1000mmx 200mmx 60mm. DRIVINGWHEEL: Fully Powder Coated threepronged drive wheel for bettert or que & free movement of the rack over the guiderail. INDEXINGARRANGEMENT: Acrylic cardholders provided on the front panel for easy identification & retrieval. FINALFINISH: Powder Coating (8 tanks process with 70 microns). Executive Table @ 2250L x2100D x750HT including Low Height Credestal @ 1200L x450D x650HT Providing & Fixing of Table @ 2250L x2100D x750HT TOP & GABLEEND to be made of Membrane finish with soft waterfall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18mm thick Prelaminated particle board with PVC edgeband. INCLUDING CREDESTAL @ 1200L X450D X650H:- To be made out of Membrane Finish (2 Openable Shutter & 3 Drawer Pedestal in between ) as per drawing. Executives Table @ 1350L x900D x750HT Providing & Fixing of Table @ 1350L x900D x750HT - TOP & GABLE END to be made of Membrane finish with soft waterfall edges & curved panel & Decorated Anodized section MODESTYPANEL to be made of 18mm thick Prelaminated particle board with PVC edge band as per drawing Pedestal Unit @ 750L x450D x650HT Providing & Fixing of PEDESTAL @750L x450D x650HT :-To be made out of Complete Membrane consist of with 2 Openable Shutter & as per drawing. Free Standing Table @ 1500Lx600Dx750HT Providing and fixing Table of Size 1500 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board. as per drawing. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs : 40 mm dia S.S. brush finish pipes and Modesty panel/ partition made from 35mm powder coated alluminium moduler return partition like both side prelaminated particle boards. in half and Soft pin board for half above table level. All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.:- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board, Free Standing Table @ 1200Lx600Dx750HT Providing and fixing Table of Size 1200 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board, Full Height File Storage @ 2100HT Providing and fixing Openable Ply Storage of 750 x450 x2100Ht, with 4 adjustable shelves, Complete body & shutter made in 18 mm thk prelaminated Ply. with all fixtures and fastnings. as per drawing and as approved by Architect. Inquiry/ Help Counter:- Supplying & Placing Enquiry/ Help/ Bank like Cash counter table in completely knock down conditions with an overall size 1000 mm X 820mm X 1000mm as per drawing that is to be assembled at site. The top shall have made up of 35mm thick Pre-laminated Ply with approved laminate and finish as per approved shade. The upper top shall have 25mm thick. The top profile shall be in rectangle shape with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The side edges shall be covered with die casted aluminium profile. The table top and upper top shall be supported on Ply base strip. The table shall have a front panel 25mm thick Pre-laminated Ply. A wire manager cap shall be provided on the top of the table for power connection. The end wall of the table on the side shall be topped by gable end. It shall be made up of 25mm thick Pre-laminated ply and profile shall be in linear shape with one clipped corner and covered by Aluminium profile. There shall be buffers provided to avoid the scratches on the floor. The table shall be clad with 25mm thick modesty panel which provide structural support for the table. It should be 25mm thick Pre-laminated mdf board in linear shape with appropriate PVC edge banding and covered by aluminum profile connected with both end. Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT. Providing & Arrangemnt of Mid Back, ECO CTS Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery Stool for Lab and Class-IV Providing and fixing 4 legged Lab stool, Legs made of 16 Guage 45 MM Outer dimension MS Pipe, Duly painted, With a 304 Grade Stainless steel 12 inch wide seat with a 1 inch collar, Height adjustment via a screw. as per design and drawing and instructions of Engineer in charge. Visitors Chairs:- Providing and supplying mid back chair. The seat shall be made of 15mm thick hot pressed commercial plywood upholstered with high resiliance polyurethane foam 40mm thick having density 40kg/m³ with fabric tapestry 0.6mm thick and 235 GSM and the back shall be made of two piece injection moulded polypropylene net cover upholstered with breathable mesh tapestry. The armrest of the chair shall be used polypropylene arm completely joint with seat & back. The frame structure shall be cantilever support type made up of MS/CRCA powder coated with round pipe of Dia. 25.4mm with 2mm thick. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor.The seat size shall be 470±10 mm(W) X 460±10 mm(D) and back size shall be 460±10 mm(H) from seat & overall height = 865±10 mm. OEM must have BIFMA test certificate, AIOTA Certificate, Valid menmbership of CII, Green Guard certificate for same category.
