Tender For Nagar Nigam Kota North building Furniture And Maintenance Work 2 Nit 15- 2 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge. 3 Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour, finishing etc complete. 4 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) 5 Providing & Fixing in position, following Acoustical Panelling on 50 x 50 mm sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour, finishing etc complete. 12mm wp Ply wood & 1.5mm laminate panels 6 Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. 50 mm long 7 Providing & fixing in position Stage flooring Made from 18mm plywood 1200 x 2400 & 18mm Teakwood planks 100 x 800 having tongue & grove on Sal-wood frame of 50 x 100 at 600mm c to c on stage surface including cost of required Cut-Outs, decorative mouldings / finishing-items / polish etc., as per Architectural & Acoustical Design & Instructions & Complete in all aspects. .including all materials labour, finishing etc complete 8 Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 25 mm dia. 9 Providing and fixing 25 mm thick shutters for cupboards etc. including ISI marked black enamelled M.S. butt hinges with necessary screws : Panelled or panelled and glazed shutters. Second class teak wood 10 Providing and fixing following tiles false ceiling at all heights including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the calcium silicate board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting of thickness of calcium silicate board as below:- 8 mm thick calcium silicate perforated board 11 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 1.5 mm thick. 12 PWD BSR Item Providing and fixing aluminium composite panel 5 mm thick by using 0.5 mm thick aluminium foil and 5 mm thick reflactive glass (sand bobbin ASHI India or equivalent) and framing of 2 mm thick aluminium section of 50 x 50 mm size silicon & glazing tap etc. complete up to IIIrdfloor, pattern as approved by engineer in charge. Item Based on PWD BSR 2013 13 Part-B Part-C Electric BSR Item Providing & Fixing of IP20 LED Surface/ Recessed / suspended mounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non - yellowish diffuser for uniform light distribution. High efficiency with 2.5 KV internal/external surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection and in compliance to IEC standards work at site. 36 W LED light 2x2 with acrylic / prismatic front cover. 14 Part-C Electric BSR Item Providing visitors chairs medium back premium leatherite chair hight adjustment gas lift 5 prong chrome plated steel base fitted with lock type twin wheel castors for easy movement. Steel arm rest with leatherite covering. Single seat and back cushioned with high density foam and upholstered in leatherite torsion bar mechanism of approved design complete as per Architect design and drawing approved by Engineer-in-charge. (A) Officer Chair 15 (B) Visitor Chair 16 Providing and Supplying Stainless Steel Benchaes in set of 3 (three) as per desgin. 17 Providing wooden table for RECEPTION COUNTERS/officers chambersof approved design with 19mm solid core board ISI marked water proof and 1mm thick mica at top and inside, Front having combination pattern with metalic laminate as per design and drawing of Architect as per design and drawing approved by Engineer in chargetable with 8 length 2 width and 26 height as per design of Architect (Counter top area to be measured for payment) 18 Providing wooden racks for officers chambersof approved design with 19mm solid core board ISI marked water proof and 1mm thick mica at top and inside, Front having combination pattern with metalic laminate as per design and drawing of Architect and approved by Engineer in charge 8 length 2 width and 7 height(Front area of racks to be measured for payment) 19 Providing sofa for Artium and visitors room of Officers Room and made out of Wooden frame with tapastic cloth seats 6 thick and back 2 thick 50mm density foam high quality as per direction of engineer in charge. 20 Providing, stiching, fitting curtain made out of 100% polyster glow finished with wrinkle (crush) having weight 280gm per running mtr. In width of 124 cm cloth ( Net elevation area to be measured with blind cloth 2mm thick white based as per approved design ( Sample, color to be approved by the committee) as per direction of engineer in charge.
