Tender For Supply And Installation Of Street Light High Mast And Decorative Street Light Poles In Remaining Dark Zone At Ia. Sikandrabad With 03 Year Amc. - Part-A High Mast 06 Nos. decorative light and LED Tiranga. Supply & Fixing of 16 Mtr. High Mast shaft of approved make with rising system hot dip galvanized in side & out side dip, heaving pole sheet thickness 3 mm top dia minimum 150 mm bottom dia 360 mm base plate 32 mm thick suitable for wing velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as had frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia double drum winch, including making suitable foundation as per manufacture drawing, site regiment along with foundation bolts, nuts washers, anchor plates etc. complete in all respect.Make Bajaj / Cromptonetc with approved UPSIDA prescribed Logo 2 Supply & fixing of factory wired integral200 W LED floodlight luminaries with die cast aluminium housing built with driver set confirming to IP 66 protection (with 5 years of warranty) complete in all respect,Cat.-AA(Bajaj/Philips/Wipro or equal brand approved in UPPWD) 3 Supply and fixing 25A TPN capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with ML-3 contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. complete in all respect. 4 Supplying and laying of 16 sq.mm 4 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top complete in all respects. (Havells/Polycab/Grandley or equal brand as approved by E/I.) 5 Supply & Laying of63 mm HDPE pipe ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc in existing treanch. including cost of material,labour and T&P. 6 Supply & fixing of 16 sq. mm 4 core brass nickle plated compression gland for PVC insulated cable complete in all respect. 7 Supply & fixing of 16 sq. mm 4 core size pin or plan type copper tin plated socket/lug to cable leads with insulated tape and making connection to point complete in all respect. 8 Supply & fixing of 50 mm dia GI pipe B classfor climbing up the cable from ground to over head line LT pole complete withGI fitting including material,labour and T&P as per SIDC Sch item No. 25A.1(LS 6.0 mtr for each HM) 9 Supply & fixing of 100 mm dia GI pipe B classfor climbing up the cable from ground to over head line LT pole complete withGI fitting including material,labour and T&P as per SIDC Sch item No. 25(LS 6.0 mtr for each HM) 10 Supply & fixing MS clamp made out from 50x6mm MS flat for securing GI Pipe/HDPE with ST pole. 11 Providing & fixing 32mm x6mm G.I. earth strip on surface or in recess including cost of GI saddle/Al. Alloy/cadmium/PVC fastener etc.plated iron screw etc. as required for connections. (5M for each) 12 S/B of 40 mm dia x 4.5 mtr. long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. from the bottom complete with earthing lead of no.6 to 8 SWG GI wire in G.I.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing UPPWD Sch. No. 701 13 Supply & fixing of LED light Strip with driver on street light pole at two no. 24 meter entrance roads including cost work T&P men and material complete in all respect. The LED strip should be in tri Colour as red, white and green (each colour 6 mtr.respectively.) With 01 Year warranty against defects/damage/missing. 14 Supply & Fixing of 4.0 Mtr. long Decorative Ornamental Pole duly PU (Poly Urethane) Painted made of high tensile GI Steel Pipe.The Top section of pole must have Cast Aluminum Embellishments through out thelength. Base Plate size 350x350x12mm with PCD of 350mm. Foundation bolts set of M16x450mdeoorative pole made of Mild Steel with a total height of 4mtr aboveground level with single arm bracket of ornamental decorative street light 60W and predefined laser cut pattern in house laser machine in the top portion of the bracket of the pole as per design. Pole bottom base section shall be 220x220x1000mm, 2mm thiclmess column with three side predesigned laser cut and illumination. the surroundings in 20W with notioeable mode, top section pole of 90x3000x3mm & top bracket with laser cut pattern design one side of IOOOmm to hold the street light of 60W as per shared drawing. The base plate of pole shall be of size 350x350x10mm. Provision for inside termination box with 4way connector & Inoa 6 AMPS MCB for local isolation. Light fixture shall be made of aluminium of size 600x580mm of street light distribution of 60W for area lighting. Light output of souroe is more than 110lm/ watt, CRl>80, SPD 4k, operating voltage 140-270V. Fitting is IP65, wired with Branded LED and constant current driver. Proper thermal management for longer life of fixture. Led burning of 50,000 hours. The pole is coated with UV stabilized powder coat and cured in in-house powder coating machine. The decorative pole is suitable for outdoor lighting application. Pole light is complete in all aspects with all aooessories & foundation bolts. mx 4 Nos made of EN8 grade steel should be used only for erection. A lockable door of suitable size should be provided at bottom section for termination and connection with backelite sheet and connector, MCB, foundation bolts, Bottom dia-350mm up to 1200mm height from base plate.Top section dia 90mm & toleranoe as per IS code or approved by engineer in charge, Supply and fixing of decorative 60 Watt LED Post top indirect/suspended light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and above protection complete in all respect with 5years warantee.Technical specification, make & profile as approved by engineer in charge.CAT AA. 15 Supply and wiring of sub main with 02 nos.of 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of work as directed E/I 16 Supply and laying of 10 sq.mm 4 corealuminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground levelin existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie)..over a cushion of 75 mm. thick sand all around and protected. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.OEM must have its own in house NABL accrediated Laboratory for testing procedure. All Material as per Technical specificition pre approved by Engineer in charge. (Cable laid in Ex. DWC Pipe) (as per UPPWD approved make list) 17 S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (c) 25 sq. mm 18 S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated, underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connected with the earth as per direction of Engineer- incharge as per UPPWD sch. no. 503 (j) 25 sq. mm 3.5 core 19 S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respect as per direction of the Engineer- incharge as per UPPWD sch. No. 504 (c) 10 sq. mm 20 S/F of brass nickel Plated compression gland for PVC insulated and armoured served sheated, underground cable including rubber ring etc. comlete in all respects.the armouring of the cable shall be properly connected with the earth as per direction of Engineer- incharge as per UPPWD sch. no. 503 (b) 10 sq. mm 4 core 21 Part-2 Street Lights : Supply & fixing 90W LED Street light having die cast aluminium body and diffuser with driver set suitable for 90 Watt confirming to IP 66 protection complete in all respect with surge protection device. Minimum CAT AA (Crompton/Philips with 5 year warrenty against defects,damaged & missing)Make: Crompton/Philips/Bajaj/Wipro 22 Supply & fixing 130 W LED Street light having die cast aluminium body and diffuser with driver set suitable for 130 Watt confirming to IP 66 protection complete in all respect with surge protection device. Minimum CAT AA (Crompton/Philips with 5 year warrenty against defects,damaged & missing)Make: Crompton/Philips/Bajaj/Wipro 23 Supply & fixing steel tubular pole 9.50 Metre long designated 410 SP-39 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. 24 S/F of street light junction box made of SMC material complete with 4 way terminal block, cable gland etc. 25 S/F of 6 Amp to 32 Amp SP MCB (10KA) B curve 26 Supply & fixing 32mm dia,1.20M long GI bend pipe with 02 nos. clamp of 50x6mm MS Flat suitable for fixing street light on ST pole including cost of men and T&P. 27 S/E of D clamps of 38mm X 6mm flat iron for wall/ roof type service bracket with bolts, nuts etc, complete in all respects including painting with aluminium paint 28 Supply & fixing of 100 x 110 mm shackle insulator /100 x 80 mm pin insulator including G.I. Bolts/ spindle nuts etc.Complete in all respect. 29 Supply, sagging & tensioning of 6 SWG GI earth wire including cost of material, men and T&P 30 Supply & fixing insulated piercing connector set suitable for ABC cable/Insulated Conductor including cost of material,men and T&P. 31 Suppy,laying & drawing of3x1.5 Sq mm PVC insulated copper cable for Street/flood lights connection in existing pipe/surface/air as required including cost of material, men and T&P.(Havells/Polycab/Grandlay) 32 Supplying and laying of 25 sq.mm 3.5 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top complete in all respects. 33 Supply and laying of 16 sq mm 2 core aluminium conductor PVC insulated , armoured , served ,sheathed cable 1100 v grade in existing pipe/surface/pole etc. (Havells/Polycab/Grandley/Gloster) 34 Supply & fixing of 25 sq. mm 3.5 core cable socket/lug with insulated tape in cable termination complete in all respect. 35 Supply & fixing of 16 sq. mm 2 core cable socket/lug with insulated tape in cable termination complete in all respect. 36 Supply & fixing of 25 sq. mm 3.5 core brass nickle plated compression gland for PVC insulated cable complete in all respect. 37 Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete inall respect. The armouring of the cable shall be properly connected with the earth as per direction of EngineerIn charge. 38 Supply & fixing 40A TPN capacity of automatic street light cubical panel painted with anti corrosive alkali and acid proof paint consisting of digitel/time switch TSO 100 series with ML-3 contactors,HRC fuses/MCB/MCCB/ isolating switch metering instrument & instrument box with CTs etc or as directed . Design & material will be approved by Engineer in charge. 39 S/B of 40 mm dia x 4.5 mtr. long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. from the bottom complete with earthing lead of no.6 to 8 SWG GI wire in G.I.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect.(Approved make) 40 Providing & fixing 32mm x6mm G.I. earth strip on surface or in recess including cost of GI saddle/Al. Alloy/cadmium/PVC fastener etc.plated iron screw etc. as required for connections. 41 Supply & Laying of 90 mm dia (OD-90 mm & ID-76 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend,couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level)including excavation and refilling the trench but excluding sand cushioning andprotective covering etc. complete in all respect 42 Supply & fixing of 50 mm dia GI pipe B classfor climbing up the cable from ground to over head LTlinepole/Metering point complete withGI fitting including material,labour and T&P. 43 Supply & fixing of 100 mm dia GI pipe B classfor climbing up the cable from ground to over head LTlinepole/Metering point complete withGI fitting including material,labour and T&P. 44 Supply & fixing MS clamp made out from 50x6mm MS flat for securing GI Pipe/HDPE with ST pole. 45 Supply and fixing of MS/GI clamp as per design suitable for fixing shackle insulator, made out for 50x6mm M.S. Flat including nut, bolt & washer. 46 Supply & erection of stay set at 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19 mm 600 mm double screw tightener, 7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete complete in all respect 47 Supply , Sagging & tensoning of overhead line with insulated ACSR weasel conductor including binding etc complete in all respects. 48 Supply,sagging,tensioning,jointing and binding of ACSR Weasel conductor including cost of aluminium tape binding wire and jointing sleeves complete in all respects including materiaI,men an T&P for proper completion of work . 49 Fabrication, supply and fixing of work information board in M.S. frame made by 50mm dia Square Pipe of Stainless steel grade SS-304 & 16 mm thick base plate with back supporting of bracing by MS flat of 25x6mm and 2.85 Mtr long supporting leg made from 65mm pipe SS-304 grade with proper grouting arrangement. The board should be Retro reflective type in green color with white letters as required and shall be fixed at a height of 1.2 Meter from ground by providing 0.45x0.45x0.60 Mtr cement concrete stone pad as per drawing enclosed.The Borad Should be installed within 07 day of signing of Contract Boand.) 50 Part-3 AMC of work :S&F single unit Aviation obstruction blinking RED LED Light with making connection etc. complete in all respect on top of the as per direction of engineer incharge. (CAT AAA) as per UPPWD Sch item No. 409 51 S&F junction box made from MS Sheet of 200x300x100mm duly painted, complete with cable glands, connector etc. suitable for 24 Nos. Flood lights connection.ED-II(39)/Dt: 01.06.2022 52 S&F Annealed tinned Copper flexible soft PVC/Rubber insulated trailing cable of 4.0 sq.mm 5 core in full length suitable upto 30 Mtr height. ED-II(39)/Dt: 01.06.2022 53 Supply and fixing of male-female plug socket for 16 meter high mast lighting system complete in all respects.ED-11(39)/Dt: 01.06.2022 54 Rewinding/Repairing of 1.5 HP 3 Phase 415V Burnt AC Power Tool Motor with B-Class super enamel Copper wire including dismantling and re-fixing at Original place 55 Supply & top-up gear oil in winch machine by opening gear box including cost of material, men and T&P. 56 Oiling & greasing of SS wire rope set and other moving parts by lowering down.re-hoisting of lantarn carriage including cost of material, men and T&P 57 S&F double drum 750 Kg winch machine suiable for high Mast Light including making/modification proper arrangement for installation in existing shaft. 58 Supply & fixing Gl lantern carriage made from 50NB ERW Class B Pipe suitable for 16/20/30 mtr lighting fixing including lowering & hoisting of system and all other associated work along with cost of men, material and T&P. 59 S&F of stainless steel grade AIS1316 steel wire rope set 6-8 mm diameter in full length suitable for 12/16/20/30 Mtr height on existing winch machine including making/modification proper arrangement for installation in existing machine. 60 Supply & fixing 3-Phase, 63A 415V Power Contractor ML-3 type or equel for Automatic Street & High Mast Control Panel in cluding cost of Connection, men and T&P. 61 Supply & fixing Astronomical time switch L&T/Siemens/C&S or equel brand including cost of connection, material, men and T&P. 62 S&F of 63 amp. 4 pole MCB (10KA cat B) for control panel complete in all respects 63 S&F of 40 amp. double pole MCB (10KA cat B) for control panel complete in all respects 64 S&F of 100 Amp. T.P. Isolator CAT B 65 S&F of 80 to 100 Amp 4 pole MCCB (16 KA) ThermalMagnetic release 66 Supply & fixing steel tubular pole 9.50 Metre long designated 410 SP-39 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. 67 Supply and making straight through joint with cast resin compound including ferrules and other joints materials for following size of PVC Insulated and PVC sheathed/XLPE aluminium conductor 25/35/50 sq.mm 3.5 core cable of 1100 v grade complete rates 68 Supplying and laying of 16 sq.mm 4 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade at a depth of 750 mm below ground level with existingG.I./M.S./DWC or Hume pipe in road crossing or along the wall complete in all respects. (Havells/Polycab/Grandley or equel brand as approved by E/I.) 69 Supply and wiring of submain with 2 number 2.5 sqmm FRLSH PVC insulated single core multistranded copper conductor cable in existing conduit complete in all respects complete. 70 Providing operating cum maintenance staff of the entire street light network for routine maintenance of street lighting system, administrative, site office and staff colony etc including dismantling & re fixing of other street lights of UPSIDA with travelling expenses etc. (Electrician cum supervisor 01 nos, electrician 01 nos, helper 03 nos) 71 Supply & fixing jointing sleeve for Insulated ACSR Weasel conductor for cost of all material, men and T&P 72 S&F of 6-32 amp. double pole MCB (10KA cat B) for control panel complete in all respects. 73 Supply & fixing Sheet steel enclosure for SP/DP MCB with neutral link and earth terminal 74 Painting letters (Pole No.) 2.5cm up to 8.0 cm size complete on Street light Pole/Panel/Other electrical properties under UPSIDA including cost of all material, men and T&P (To be done after 1 year) 75 Cleaning & spray painting of ST bend pole and power ST pole (above 10 meters) with one coat of red oxide primer and two coat of alum. paint/PU paint as per direction of Engineer incharge including cost of all material, men and Hydraulic crane, other T&P. (Burger/Nerolac/ Asian make) (To be done after 1 year) 76 Trimming of tree branch around the street light pole/ST pole/Central Varge for proper illumination & proper disposal of tree branch collecting on trolley or similar moving item including cost of men, trolley, T&P etc. (1000 x 3 Year) 77 Strengthen of Other ST pole foundation by providing new concerting including cost of all material men and T&P. 78 Dismantling & re-grouting of street light/Steel tubler (upto 12 Mtr long) Tilt/sick bend pole in 1:3:6 ratio cement concrete with stone pad including strengthening of pole by providing additional 04 Nos. support of 65x65x6mm or higher size MS angle in suitable length with the help of welding/cutting as per technical specification. 79 Providing pole earthling of an existing pole by inserting MS Rod 2000x2500mm in vertically ground level and connecting the pole with the help of 6 SWG GI wire including cost of all material, men and T&P. in industrial area as per UPSIDA/UPPCL Technical specification. 80 Hiring Charge of 80-100 feet expandable street light repairing hydraulic lift, capacity 300 Kg including cost of operator, mounting vehicle and fuel etc. (8 Hrs x 4 day x 36 Month) 81 Cost of material spares, wire, fuse, small accessories, alum. lug upto 16 sqmm, small cable gland, insulation tap, plastic tie, screw, nut & bolts,old cloth, cleaning spray and other small associated required for up gradation work etc.,
