Construction Of Proposed Stilt Plus 3 Houses In Sector-16B At Vasundhara, Ghaziabad. - Excavation in foundation in ordinary soil (loam , clay or sand) including lift upto 1.50 m and lead upto 30 m and including filling watering and ramming of excavavted earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal of surplus earth upto a distance of 30m from the foundation trenches as per direction of Engingineer Inchrge 2 Plain CementConcrete with4 cm gauge approved stoneballastcoarse sand&cement in the proportion of 8 : 4 : 1in foundation and under floorsincluding supply of all materials,labour. Tools&plantsetc requiredforproper completion of the work. 3 Sandfillinginplinthincludingsupplyof necessary quantity of sand from a distance not exceeding8kms. from the site ofworkand includingwatering,dressingetc , labour and T & Petc. required for the proper complition of thework.Saplingofgirthupto30cms. measured at a height of 1 M. above level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. 4 Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating chemical barrier under and around the column pits wall trenches basement excavation top surface in plinth filling junction of wall and floor ,along the external perimeter of building expansion joints,suurrounding of pipes and conduites etc.complete [Plinth area of the building at ground floor only shall be measured as per I.S.6313[Part-21981] Adenine mollifiable concentrate of any other approved materialsuch as hepthrachlor or chordancewill be used the rate of application of chemical emulsion. 5 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All work up to plinth level. 6 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.All work above plinth level up to all floor level. 7 P.C.C. concereteDoorsills,Chaukhat, boundarypost,shelves anssimilar small work with cementapprovedcoarsesand with2 cm graded stone grit in 1:2:4 excluding fixing and binding the same with 24B. W.G. G. I. binding wire up to fourth floor 8 Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. up to fourth floor 9 Cartage of Earth Filling material by mechnical transport including loading, unloading andstacking.Earth lead up to 8.00 km. 10 Class 150 brick work in 1:6 cement and coarse sand of (1.75-2.00) fineness modulusmortar in foundation and plinth includingsupply of all material labour T&Petc erquired for proper completion of work. 11 12 mm thick plaster with cement and coorse sand of 1.50-1.75 finesess modules in 1 :3 over brickwork minimumthickness not to beless than 1cm, including supply of all materials, labour, tools & plants etc. required for proper completion of the work. 12 Engraving line in outer surface of plaster as per approved pattern using repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge. Up to fourth floor 13 Class 150 brick work in 1:6 cement and coarse sand of (1.75-2.00) fineness modulusmortar in super structure includingsupply of all material labour T&Petc erquired for proper completion of work. Up to fourth floor 14 M-150 half brick work in 1:4 cement and coarse sand (F.M. 1.50-1.75) mortar insuper structure including necessary cutting & moulding of brick as required thickness of walls not be less half bricks including supply of all material labour T&P etc required for proper completion of work. Up to fourth floor 15 UPVC Frame, Sach and mullion extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be accpetable casement door with 3D hinges made of (big series) frame 67 X 64mm & Sach 67X110 mm both having wall thickness of 2.3 ±0.2mm and single glazing bead/double glazing bead of appropriate dimension (Area of door upto 2.00 sqm)Up to fourth floor 16 M.Siron of small size and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required form including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. Up to fourth floor 17 Providing wood work(sal wood ) in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Up to fourth floor 18 Supply andfixing32 mmthick(ISImark ) formaldehyde bonded flush door shutters confirming to IS:2202 (part-01) non decorative type (paintable) core of block board construction with frame of wood and well matched commercial veneering with vertical. glains or crose bonds and face veneers on both face of shutters.Up to fourth floor 19 Cement Concrete with 2 cm gauge approved stone ballast, coarse sand & Cement in the proportion of 4:2:1 including supply of all materials, labour, tools & plants etc. requireddproper completion of the work. Up to fourth floor 20 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Up to fourth floor 21 Providing and laying (Brick coba) 12 mm thick laid with M150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other over 20 mm thick of base of cement mortar 1:4 cement and coarse sand mix with water proofing compond spreading cement slurry mix with aerclic cemrnt concrete water proofing compound filled gap of coba and top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth and top mashes false square 30X30 cm and side wall parapet shall be monolithic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight and including supply of all materials, labour, tools & plants etc. required for proper completion of work. 22 Making Khurra 45cmsx45 cms with c.c. 1:2:3 average 5 cm thick supply of all material, labour, T&P etc. required for proper complition of the work. 23 M.Siron ofrailling wrought to required form including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. Up to fourth floor 24 Providing and laying Vertified floor tiles 600x600 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Up to fourth floor (Kajaria, Somany, Jhonson etc.) 25 Supply and fixing of kota stone in flooring 20 mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 12 mm base coat (bedding) of 1:2 cement & coarse sand mortar and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour, tools & plants etc. required for proper completion of the work. Up to fourth floor 26 2.5 cm (1) thick 1:2:4 Plain Cement Concrete floor with cement, approved coarse sand and 2 cm. (1) graded approved stone grit, laid in panels finished with 3 mm. (1/8) floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3) thick base concrete consisting of cement, coarse sand of 1.5-1.75 fineness modulus and stone ballast 4 cm. (1.5) gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, tools & plants etc. required for proper completion of the work. 27 White washing in three coats including supply of all materials, labour, tools and plants etc. required for proper completion of work . Up to fourth floor 28 12 mm thick plaster with cement and coarse sand of 1.5 to 1.75 finesess modules in 1:6 over brickwork minimumthickness not to beless than 1cm, including supply of all materials, labour, tools & plants etc. required for proper completion of the work. Up to fourth floor 29 Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in- charge (payment for provoding grooves shall be made separately) Up to fourth floor 30 Forming groove of uniform size of 15x15mm in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge. Up to fourth floor 31 Distempering two coat with oil bound distemper of approved Brand and manufacture and required shade on undecorated wall surface to give an evenshade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, tools & plants etc. required for proper completion of the work. Up to fourth floor 32 Providing and fixing glass strips of 4.00 mm thick & 2.2 cm depth in joint of floor and sticking at the time of laying labour, T&P etc. complete. 33 Construction of granular sub-base by providing close graded Material conforming to specifications,mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.With material conforming to Grade-I (size range 26.05 mm to 0.075 mm) having CBR Value-30. 34 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. 35 Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not wrought to included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured upto floor two lever. Up to fourth floor 36 Fixing of ChaukhatFirst Floor Door Chaukhat. Up to fourth floor 37 Fixing of ChaukhatFirst Floor Window Chaukhat. Up to fourth floor 38 Fixing of ChaukhatFirst Floor Ventilator Chaukhat. Up to fourth floor 39 Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS :277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flangesof 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dashfastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleatfixed to the angle hangers of 25 x10 0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels withthe help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board withrecommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints andtwo coats of primer suitable for boards, all as per manufactures specification and also including the cost of making opening for light fittings, grills, diffusers,cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. Up to fourth floor 40 Providing and fixing aluminiumfiting with screws for door, ISI markedUp to fourth floor 41 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete 125x64x1.90 mm Up to fourth floor 42 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessar screws etc. complete. Single rubber stoppe.Up to fourth floor 43 Painting or varnishing work in small areas or new wood work with one coat (upto one squre metre of ready mixed priming paintandtwocoatof approvedsuperior quality readymixed paint or varnishincludingsupplyofallmaterials, labour,Tools & Plants etc. required for proper completion of the work. Paint to be used should confirm the SOR-2022 GzbUp to fourth floor 44 Painting or varnishing work in small areas or new Steel work with one coat (upto one squre metre of ready mixed priming paintandtwocoatof approvedsuperior quality readymixed paint or varnishincludingsupplyofallmaterials, labour,Tools & Plants etc. required for proper completion of the work. Paint to be used should confirm the SOR-2022 GzbUp to fourth floor 45 Water Supply and Sanitary work 46 Providing and fixing 20mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes. having thermal stability for hot & cold water supply, including all CPVC plain & trass threaded fittings, vc fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cos tof cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (Make- Prince, Astral, Supreme, etc.) Qty For F.F., S.F. , T. Ffor Type-A, B and C Houses(Make- Prince/Supreme/Astral etc.) 47 Providing and fixing 20mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass thrreaded fittings, ivc fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the testing of joints complete as per direction of Engineer in Charge. Internal work-Exposed on walls (DSR 2023, Item No. 18.7.2) 335 .00 (Make- Finolex/Prince/Supreme/Astral/Ashirvad) upto fourth floor(Make- Prince/Supreme/Astral etc.) 48 Providing and fixing 20mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) for ground floor to third floor main line 49 Providing and fixing 100mm diameter C.P. brass shower rose with 15 or 20mm inlet. Upto fourth floor 50 Providing & fixing of 15mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 upto fourth floor 51 Providing & fixing of 15mm nominal bore C.P. brass bib cock of approved quality conforming 8931 upto fourth floor 52 Providing & fixing of 15mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards andweghing not less than 690gms.Upto fourth floor 53 Providing and fixing White Vitreous China Wash Basin (size 630x450mm with a pair of 15mm C.P. brass pillar taps) with C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brakcets, cutting and making good the walls whereve required.upto fourth floor (Make- Cera/Hindware/Parryware/kohler/Johnson/Jaquar) 54 Construction masonry Chamber 60x60x75cm, inside with common burnt clay F.P.S. (non modular)brcks of class designation 7.5 in cement mortar 1:4 (1 cement: 4 coarse snd) for fire hydrants, with C.I. surface box 350x350mm top and 165mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1cement 2 coarse sand 4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1) cement: 5 fine sand 10 graded stone aggregtae 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design. (For G.F. Only) 55 Construction masonry Chamber 90x90x100cm inside, with common burnt clay F.P.S. (non) modular)brcks of class designation 7.5 in cement mortar 1:4 (1 cement: 4 coarse snd) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180cm deep (Inside) with chained lid and RCC top slab 1:2:4 mix (1cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size), Uc necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine sand 10 graded stone aggregtae 40mm nominal size) and inside plastering with cement mortar 1:3 (1) cement: 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design. (For G.F. Only) 56 Costruction brick masonry road gully chamber 50x45x60cm with common bumt clay FPS. (non modular) bricks of class designation 7.5 in cement mortar 14 (1 cement 4 coarse sand) including 500x450mm precast RCC horizontal grating with frame complete as per standard design. 57 Providing and fixing of Indian make approved heavy quality P.V.C. Nihani Trap complete with C.P. brass grating nahani Trap to be fixed over and including bse concrete of 1:6:12 (cement, Fine Sand and Brick ballast) including supply of materials, labour, T&P etc. required for proper completion 110x110mm) (MR) of the work(size First Floor Up to fourth floor (Make- Prince/Supreme/Astral etc.) 58 Providing and fixing 110mm dia PVC 6kg/cm2 soil or vent pipe approved make, ISI marked, including digging and filling trenches and supply of clamps and other materials, labour, T&P etc. required for proper completionof the work. The pipe shall either be fixed parallel to the walls with M.S. clamps or laid in gound to proper slope as per engineer-in-charge. Up to fourth floor(Make- Prince/Supreme/Astral etc.) 59 Supply and laying 100mm dia 1st quality SW pipe line to proper slope over and including bed of 15cm thick cement concrete in 1:6:12 (cement, fine sand and 40mm gauge brick ballast) including excavation & refilling all earth et. (concrete shall be filled in upto half of the dia of pipe both sides joints to be filled with cement and fine sand mortar in 1:1 including testing of joints etc. complete including spun yarn 4.5kg/30m length including supply of all materials, labour, T&P etc. required for proper completion of the work (Make- Prince/Supreme/Astral etc.) 60 Providing and fixing of 110x110x110mm PVC branch (single equal junction) superior approved heavy quality of required degree with access door insertion rubber washer, 30mm thick bolts nuts including supply of all materials, labour and T&P etc, required for proper completion of the workUp to fourth floor(Make- Prince/Supreme/Astral etc.) 61 Providing and fixing of PVC door bend 110mm heavy quality of approved degree access door insertion rubber washer, bolts, nuts etc. complete, including supply of all materials, labour, T&P etc. required for proper completion of the work MRUp to fourth floor(Make- Prince/Supreme/Astral etc.) 62 Providing and fixing of 110mm dia PVC plain bend hqavy quality ISI marked of the required degree including supply of all materials, labour and T&P etc. required for proper completion of the work.Up to fourth floor(Make- Prince/Supreme/Astral etc.) 63 Providing and fixing of Water Storage tank of 1000 liters capacity, ISI marked Sintex make, including 40mm dia and 600mm length G.I. pipe B Class 25mm dia and 600mm long G.I. over flow pipe (B class) mosquito proof capacity, 15mm dia PVC float ball with brass road and union complee and also including 15mm dia B clas sinlet and outlet including construction of 4 Nos brick pillars size 23x23x23mm in 1:3 (cement and coarse sand) and plaster with sand mortar including supply of all materials, labour and T&P etc. required for proper completion of the work (Iko sor 2020 p40 item18.48)@11.00/ltr (Make- Supreme/Ganga/Victus/Sintex etc.) 64 Providing & fixking of UPVC SWR terminal guard (slotted covel) 110mm dia superior approved quality complete including supply of all material, labour and T&P etc. required for proper completion of the work. (For Third Floor) (Make- Finolex/supreme/Prince/Astral Ashirvad etc.) 65 Providing and fixing white vitreous china pedestal type water closet (European type W.C. Pan) with ISI marked white solid plastic seat and lid, 10 litre low level white PVC flusing cistern, including flush pipe, with manually controlled device (handel lever). conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Up to fourth floor (Make- Cera/Hindware/Parryware/Kohler/Jaquar etc.) 66 Providing and fixking of 110mm dia PVC heel rest bend superior quality including supply of all material, labour and T&P etc. required for proper completion of the work (for Down )(Make- Prince/Supreme/Astral etc.) 67 Pipes Providing and fixing of 110x110x110mm PVC branch (single equal junction) superior approved quality including supply of all materials, labour and T&P etc. required for proper completion of the work. Up to fourth floor(Make- Prince/Supreme/Astral etc.) 68 Providing and fixing of 750x20mm size C.P brass towel rail of qpproved quality weight 2757gms including breaket with a pair of C.P. brass breaket fixed on the wall on wooden cleats with C.P. brass screws including supply of all materials, labour and T&P etc. required for proper completion of the work and including cutting & making good the walls Up to fourth floor 69 Providing and fixing of Stainless Steel A ISI 304 (18/8) kitchen sink with drain board 510x1040mm bowl depth 225mm as per IS 13983 with C.1. brackets and stainless steel plug 40mm, including painting of fitings and brackets, cutting and making good the walls wherever required. Up to fourth floor (Make-Hindware/Neelkhanth/ Nirali/Cera etc.) 70 Providing and fixing of 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Up to fourth floor (Make- Saintgobain/Atu/Modiguard/ Modiglass/Cera /Goldplus etc.) 71 Providing and fixing of 110mm dia PVC P-Trap including supply of all materials, labour and T&P etc. required for proper completion of the work Up to fourth floor(Make- Prince/Supreme/Astral etc.) 72 Providing and fixing of 110mm dia PVC End Cap including supply of all materials, labour and T&P etc. required for proper completion of the work (At Stilt)(Make- Prince/Supreme/Astral etc.) 73 Providing and Laying non-pressure NP2 class (light duty) 150mm dia RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1.2 (1 cement: 2 fine sand) including testing of joints etc. complete(Ground Floor) 74 Providing and faxing of 110mm Door Tee of approved quality including supply of all materials, labour and T&P etc. required for proper completion of the work. (MR) Up to fourth floor 75 Providing and fixing of 110mm PVC Elbow of approved quality (Kissan, Prome or Supreme) including supply of all materials, labour and T&P etc. required for proper completion of the work Up to fourth floor(Make- Prince/Supreme/Astral etc.) 76 Providing and fixing of 110mm PVC door Y of approved quality (Kissan, Prome or Supreme) including supply of all materials, labour and T&P etc. required for proper completion of the work. Up to fourth floor(Make- Prince/Supreme/Astral etc.) 77 Providing and fixing of Ferul connection including supply of all materials, labour and T&P etc. required for proper completion of the work. 78 Drilling suitableCore cutting holes in reinforced or plain cement concrete with power driven drill machine to minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforment, all complete as per direction of Engineer, in charge Up to fourth floor 79 Providing and fixing of 110mm PVC Plain Y of approved quality (Kissan, Prome or Supreme) including supply of all materials, labour and T&P etc. required for proper completion of the work. Up to fourth floor(Make- Prince/Supreme/Astral etc.) 80 Electrical 81 Wiring point for light with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe concealed in the wall, complete with copper earth continuity wire, with modular type switch etc., complete in all respect, as directed including matching colour wash Up to fourth floor (Make-Havells/HPL/Indo Asian/Polycab/Microtek etc.) 82 Wiring point for fan/fresh air fan (light duty exhaust fn) with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor cable as earthwire drawn inside the conduit inside PVC conduit, concealed in the wall, complete with earth continuity wire, with modular switch etc. complete in all respect, including, matching colour wash. Up to fourth floor (Make-Havells/HPL/Indo Asian/Polycab/Microtek etc.) 83 Wiring point for plug with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor cable as earthwire drawn inside the conduit inside PVC conduit, concealed in the wall, complete with earth continuity wire, with modular type switch etc. complete in all respect, including, matching colour wash. Up to fourth floor upto fourth floor (Make-Havells/HPL/Indo Asian/Polycab/Microtek etc.) 84 Wiring point for call bell with 1.5sqmm FRLSH PVC insulated copper conducto cable as earthwire drawn inside the conduit, in PVC conduit pipe concealed in the wall, complete with earth continuity wire and modular type switch etc. complete in all espect including matching colour wash. Up to fourth floor Qty. for F.F. Type A, B & C (1+2+1) (Make-Havells/HPL/Indo Asian/Polycab/Microtek etc.) 85 Supply & fixking of power plug with 20Amp/250volt flush type modular switch and 5 pin 20Amp/250 volt flush type universal modular socket, switch on concelaed M.S. box, including supply of all material, labour, T&P etc. required for proper completion of the work Up to fourth floor Qty for First Floor (Make-Havells/HPL/Indo Asian/Polycab/Microtek etc.) 86 Supply & fixing of M.S. box of size 600mmx480mmx200mm deep in sunk for housing BDB/TPN fabricated from 16 gauge M.S. sheet and 13mmx2.50mm flat iron etc. painted outside with red-oxide primer and inside with synthetic enamel paint complete in all respect Up to fourth floor Qty. for F.F. Type A, B & C (2+4+2) 87 Supply and wiring of submain with two number 6 sqmm FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in 25mm dia heavy duty (2mm thick) PC conudit pipe concealed in wall and partly laid in slab alongwith reinforcement before concreting with one number earth continuity wire including matching colour wash etc. complete in all respect. Up to fourth floor (Make-Havells/HPL/Indo Asian/Polycab/Microtek etc.) 88 Supply and wiring of submain with two number in 20mm dia heavy duty 2mm thick PVC conduit with 2.5sqmm FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit etc. complete in all respect, as directed, including matching colour wash Up to fourth floor (Make-Havells/HPL/Indo Asian/Polycab/Microtek etc.) 89 Supply and fixing of call bell of approved make on polished MDFEG/teak ply board incluidng making connections etc. complete in all respect. Up to fourth floor (Make-Havells/HPL/Indo Asian/Polycab/Microtek etc.) 90 Supply and burring of Safe Earthing Electrode T-39, (Hot Dip Glavanized), length upto 3000mm, outer pipe 76mm, inner dia 38mm, terminal dia 12mm, outer Gl pipe of 16 SWG and inner Gl pipe of 12 SWG with Hot Dip Galvanization upto 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mmx3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. Strip will be extra)Make: As approved in U.P.P.W.D. & C.P.R.I. certified. Qty for Stilt (For Type A, B & C) 91 Supply and fixing of 63 Amp 4 Pole Isolator complete in all respect, as directed at site by Engineer-in-charge. Qty For Type A, B & C (1+2+1) Up to fourth floor (Make- Siemens/L&T/ABB/ Socomec/Anchor/Panasonic/Havells/HPL/Polycab etc.) 92 Supply and fixing of 80 to 100 Amp 4 pole MCCB (16KA) Thermal Magnetic release.Qty For Type A, B & C (1+2+1) Up to fourth floor(Make-Siemens/L&T/ABB/Socomec/Anchor/ Panasonic/Havells/ HPL/Polycab etc.) 93 Supply and fixing of 6 Amp to 32 Amp SPMCB (10KA) C Curve. Qty For Type A, B & C (1+2+1) Up to fourth floor(Make-Siemens/L&T/ ABB/Socomec/Anchor/Panasonic/ Havells/HPL/Polycab etc.) 94 Supply and laying of 70sqmm 3-1/2 core aluminium conductor PVC insulated armoured sered sheathed cables 1100 volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.(Qty for Type A, B & C) (Make- Siemens/L&T/ABB/Socomec/Anchor/ Panasonic/Havells/HPL/ Polycab etc.) 95 supply and fixing of LED Tube Light with batten suitable for up to 1 x 22 watt LED tube light fitting including tube on surface complete in all respect.Qty For Type A, B & C (1+2+1) Up to fourth floor (Make-Philips/Wipro/Havells/Panasonic/ Jaquar/HPL/Polycab/Surya, etc.) 96 Supply and fxing hexagonal/round G.P. fan box of approved make made up of 1.0mm thick ISI marked G.P. Sheet spot welded four to eight holes of 25.4mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5mm G.P. sheet made upper & lower cover duly screwed fitted with 300mm round zink coated M.S. Bar x 12 mm & brand name should be embossed. fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.Qty For Type A, B & C (1+2+1) Up to fourth floor 97 Supply and fixing of electronic fan dimmer (modular) 300/400 watt, ISI marked, on the existing switch board including making connections, required material, labour, T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work. Qty For Type A, B & C (1+2+1) Up to fourth floor (Crompton/Usha/ Orient/Bajaj/Havells/Anchor/Panasonic/Polycab/Surya) 98 Supply and laying of 32mm x 6,, G.I. strip from earth electrode directly in the ground as required complete in all respect. 99 supply and fixing of 02 nos meter panel of suitable size for 1x8=8no. Meter making 2mm CRCA sheet with following accessories :-a. Incoming 200 A MCCB with nutral link and 4 no suitable bus bar.b. Box for 1x8=8 nos energy meter shall be provided with 40Amp DP isolator switch for each and internal wiring. As per directions of Engineer in charge complete in all respects as per drawing.(Make- L&T/ ABB/Havells/HPL/IndoAsian/etc.) 100 Supply and wiring of submains with 2 nos. 2.5 sq mm & with no earth wire of 15 sq mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in heavy duty (2 mm thick) PVC conduit of 25 min dia complete, including supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge Up to fourth floor (Make-Havells/HPL/Indo Asian/Polycab/Microtek etc.) 101 S & F surface/Flush mounting 4ways TPN distribution board without additional Door without MCB complete in all respect, as directed at site by Engineer in charge Up to fourth floor
