Tender For Renewal / Replacement Of Chain Link/ Pvc Coated Chain Link Fencing And Barbed Wire Fencing At Certain Locations At Stn Suryalanka.; 1 DismantlingRCC fencing Posts embedded in concrete, any section, including taking out embedded portion and removal of surplus excavated materials to a distance not exc 50m complete all as specified and directed 2 Dismantling offencing wire mesh of any description including round bar,line wires , flat iron, clamps etc complete all as specified and directed 3 Excavation in post holes (or similar holes) each n.exc 0.50cum, getting out, returning, filling and ramming including disposal of surplus soil complete all as specified and directed 4 M&L forPlain cement concrete 1:4:8 mixtype D-2 (using 40mm graded stone aggregate)as in foundation, filling and mass concrete complete all as specified and directed by Engineer-in-Charge 5 M&L for Mild steeldeformed TMT bars 8mm diaas in reinforcement to concrete, cut to length, bent to shape required incl cranking, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm diacomplete all as directed by Engineer-in-Charge 6 M&L for mild steel deformed TMT bars 5mm dia andupto and including 10mm dia as in stirrups, spacers, cut to lengthy, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mmdia complete all as specified and directed 7 M&L for providingReinforced cement concrete type B-1, 1:2:4mix ( using 20mm graded stone aggregate) as in precast posts, fencing posts, staining or terminal posts, struts etc. for fencing, , average sectional area exc 100sqcm and n.exc 250sqcm with or with out chamfered angles and flat, splayed, rounded or mitered tops and fixed complete all as specified and directed 8 S&F for mild steel machine made screw bolts of 5 to 10mm dia (diameter of neck in mm) hexagonal or square heads at one end and screwed the other, screwed end fitted with washers and one hexagonal or square nut exc 10cm but n.exc 15cm long complete all as specified and directed 9 S&FGalvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and staining and fixed to RCC precast fencing posts including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc.fixed in repairs complete all as specified and directed 10 S&F PVC coated chain link fencing of mesh size 50 X 50 X 4mm dia wire ( 1.50 mm PVC coating over 2.50mm dia wire) fixed to any type of standard rails, posts, staining bolts etc. complete all as specified and directed 11 S&FFe-290 Gde E-165 mild steelflat iron fillets for securing wire mesh etc. including all necessary drilling holes for bolting or riveting etc. and similar workcomplete all as specified and directed 12 S&FFe-290 Gde E-165 mild steelwork as in clamps, hold fasts, hooks etc., and similar small articlescomplete all as specified and directed 13 S&F for mild steel machine made screw bolts not exceeding 5cm long with 5 to 10mm (diameter of neck) hexagonal or square heads at one end and screwed the other, screwed end fitted with washers and one hexagonal or square nut 5cm long complete all as specified and directed 14 M&LMild steel bar round bars 10mm dia and over in fencing,cut to length, bent to shape required incl cranking, bending,hooping ends and binding etc., conforming to Gde 1, IS-432 (Party-1) complete all as specified and directed 15 M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description over 10cm width or girth, and applying two coats of synthetic enemal paint over a coat of red oxide or zinc chrome primer complete all as specified and directed(Make: ASIAN/SHALIMAR/BERGER/JHONSON & NICHOLSON ) 16 M&L for preparation of newly plastered surfaces of RCC fencing posts/pillars etc and applying three coats ofwhite wash, including preparation of surfaces complete all as specified and directed
