}

Tender For Addition / Alteration To Toilet In Kv No.2 Hyderabad Under Ge Golconda., golconda-Telangana

Military Engineer Services has published Tender For Addition / Alteration To Toilet In Kv No.2 Hyderabad Under Ge Golconda.. Submission Date for this Tender is 25-10-2025. Toilet Bathroom Tenders in golconda Telangana. Bidders can get complete Tender details and download the document.




Tender Notice

51591368
Tender For Addition / Alteration To Toilet In Kv No.2 Hyderabad Under Ge Golconda.
Tender
Indian
Telangana
Golconda
25-10-2025

Tender Details

Tender For Addition / Alteration To Toilet In Kv No.2 Hyderabad Under Ge Golconda.; 1 Demolition of brick work or stone masonary, built in cement mortar complete as specified and directed. 2 Demolition of cement concrete (unreinforced) filled in sunken floors (other than ground floors) complete all as specified and directed. 3 Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and disposing rubbish off the school premises. 4 M&L 15mm thick rendering in cement mortar 1:3 mixed with WPC on fair faces of brick or concrete surface complete all as specified and directed.Note:- WPC will be measured paid separately. 5 M & L for a coat of bitumen VG-10 @ 1.20 kg/sqm over a coat of bitumen primer 0.70 kg/sqm complete all as specified and directed. 6 M&L for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/Sqm laid over primed surface including bitumnious primer conforming to IS -3384 applied @ 0.3 ltrs/Sqm by forced application over finished with one coat of aluminium paint @ 100 ml/Sqm, 10 CM overlap fused uniformly by LPG torch flame, including rendering 10mm thick in cm 1:4 on concrete surfaces of roofs, parapet etc. finishing to surfaces even and smooth without using extra cement and provinding necessary slope with using approved WPC @ 200 ml per 50Kg bag of cement complete including taking down existing roof treatment and cement plaster of any description, roughing, preparing the surface by cleaning the surface with wire brushingscrubbing down with water to receive new treatment all as specified and directed.(NOTE : Supply of WPC will be paid under the respective Item) 7 Supply only integral water proofing compound. 8 M&L for PCC 1:5:10 Type (Using 40 mm graded stone aggregate) in filling and mass concrete (sunken floor filling) complete all as specified and as directed. 9 M & L brick work with fly ash bricks built in CM 1:6 with sub class B bricks straight or curved on plan exc 6 mtr mean radius complete all as specified and as directed. 10 M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4.complete all as specified and as directed. 11 M&Lnon skid coloured ceramic tiles 7-8 mm thick (square/ rectanglar ) area of each tile exc 0.06 sqm but nexc 0.11 sqm in floors, laid over and including 15mm thick screed bed or bedding in cement mortar (1:6), set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and as directed. 12 M&L glazed ceramic coloured tiles 450x300X7mm in vertical surface fixed over and including 10mm thick back coat in CM 1:4, set and and jointed in cement slurry and pointed with white or coloured cement to match complete all as specified and directed. 13 Taking down cement or cement limes plaster on brick walls including ranking out joints, hacking for key, scrubbing down with water etc.complete all as specified and as directed. 14 M&L 15mm thick plastering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. 15 S & F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)complete all as specified and directed by Engr-in-Charge. 16 S & F plastic water closet seat , black/white, closed pattern with flat bottom & cover and mild steel chromium plated or aluminized hinging device.complete all as specified and as directed. 17 S&F in repair PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and32mm PVC flush pipe.complete all as specified and as directed. 18 Supply and fix wash hand basinVitreous china white ovel type size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets 19 Taking up or down for bore of pipes in 15 mm, steel tubing ,connections and fixtures etc complete all as specified and as directed. 20 Taking up or down for bore of pipes in 20 mm, steel tubing and connections etc complete all as specified and as directed. 21 Supplying and fixing 20 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling complete all as specified and as directed. 22 Supplying and fixing 32 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling complete all as specified and as directed. 23 S & F bib tap 15mm cast copper alloy with crutch or butterfly handle screwed for iron pipe and fixedcomplete all as specified and as directed. 24 S&F in repairs 15 mm dia Brass chromium plated shower rose 125mmsize fixed complete all as specified and as directed. 25 S&F Stop valves cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed15mmborecomplete all as specified and as directed. 26 S&F in repairs 15 mm dia Stop valves (angle cock), cast copper alloy, fancy type, chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. 27 S & F PVC connection 600 mm long 15mm dia with both ends bolt and cup of PVC water etc complete all as specified and as directed. 28 S & F 32mmin Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement & other end fixed complete all as specified and as directed. 29 S&F 32mm Dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid for wash hand basin waste pipe complete all as specified and as directed. 30 S & F tubular towel rail 20mm dia brass chromium plated D type 60cm between two flange complete all as specified and as directed. 31 S & F in repir15 mm dia Pillar taps swan neck ancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot or ‘Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. 32 S&F in repair 2150mm x 600mm mirror with 6 mm thick plywood backing and powder coated aluminium framing complete all as specified and as directed. 33 Suppy and fix600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers.complete all as specified and as directed. 34 S&F in repair 15 mm bore two way Bib taps fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. 35 S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. 36 M & L Granite (of any type) work (table rubbed and polished) 20 mm thickin steps, jambs, pillars, window-cills, cooking / WHB platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. 37 M&L for screed bed or bedding layer of mortar 20mm thick in CM (1:6) for laying floor tiles complete all as specified and as directed. 38 S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls 110mm borecomplete all as specified and as directed. 39 S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls 75mm bore complete all as specified and as directed. 40 S&F PVC (SWR) bends any radius 110mmbore complete all as specified and as directed. 41 S&F PVC (SWR) bends any radius with access doors 110mm bore complete all as specified and directed by Engr-in-Charge. 42 S&F PVC (SWR) junction single, (Single T) equal or unequal with access door 110 mm borecomplete all as specified and as directed. 43 S&F PVC (SWR) vent cowl 110mm borecomplete all as specified and directed by Engr-in-Charge. 44 S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed. 45 S&F PVC (SWR) bends any radius with access doors 75mm bore complete all as specified and as directed. 46 S&F PVC (SWR) junction single, (Single T) equal or unequal with access door 75 mm borecomplete all as specified and as directed. 47 S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cementcomplete all as specified and as directed. 48 M&L salt glazed stone ware gully traps square or rounded mouthed type & fix 150 x 150 mm fixed in cement concretecomplete all as specified and as directed. 49 Dismantling water tanks Exc 500 ltr & n exc 1000 ltr and removing to store complete all as specified and as directed. 50 S&F 2000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) double layer hoisted and fixed in position all as specified in SSR Part I 51 Taking down chowkats or frames with shutters (without taking off shutter from the frames)not exc. 1.5 sqm each complete all as specified and as directed. 52 Taking down chowkats or frames with shutters (without taking off shutter from the frames)exc. 1.5 sqm but n exc 4.00 Sqm each complete all as specified and as directed. 53 M & L for solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as per specification and drawing complete all as specified and as directed. 54 M & L factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing at site as per specification and drawing complete all as specified and as directed. 55 S & F Butt hinges extruded aluminum alloy with galvanized mild steel pin anodized 100mm type B22 complete all as specified and as directed. 56 S & F Aluminumanodized tower bolt of extruded section125mm size complete all as specified and as directed. 57 S & F Aluminum handle cast type 150mm size complete all as specified and as directed. 58 S&F steelventilator with top hung double shutter including hinges, steel peg stay complete complete all as specified and as directed. 59 M & L for double shutter pre coated box type steel window with side hung shutters (Glazed and gauzed) including hinges with steel handle and peg staycompletewith or with out glazing bars dovtailed orwelded complete all as specified and as directed. 60 S&F 4 mm thick sheet figured glass, pin head type and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and as directed. 61 S&F in Stainless steel wire cloth 0.36 mm nominal dia ofwire & average width of aperture 1.40mm and fixed with tinned tack orgalvanised wire staples including necessary fittings complete all as specified and as directed. 62 M&L for two coats of Synthetic enamel paint over a coat of red oxide primer on new steel surfaces width or grith exc 10 cm including preperation of surfaces ccomplete all as specified and as directed. 63 M&L for 5 mm thick rendering in CM 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed. 64 M & L three coats of white wash onnewplastered surface of walls including preparation of surface on walls complete all as specified and as directed. 65 M & L three coats of white wash onceilingnewplastered surface of walls including preparation of surface on walls complete all as specified and as directed. 66 M & L preparation of old decorated surfaces of walls plastered or unplastered by brooming down or steel wire brushing, scrapping down smoke soots, moulds ,moss and efflorecent salts and treading oiland greasy spots etc and applying one coat of white wash to walls complete all as specified and as directed. 67 All as per item No.66above but on ceiling complete all as specified and as directed. 68 S&F 32mm Dia Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 laid for urinal waste pipe complete all as specified and as directed. 69 S & F in repair Vitreous china urinal full stall type white with grating and union for discharge pipe(excluding flushing cistern) but including urinal pipe etc complete all as specified and as directed. 70 S&F Urinal spreader of PTMT any colour forfixing with 15 mm dia pipe. (Minimumweight 60gms) complete all as specified and as directed. 71 S & F in repair for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm - 210 gms/ 25mm-455gms/ 40mm - 690 gms), Bore dia of pipe in 20 mm, etc complete all as specified and as directed. 72 M & L RCC 1:2:4, type B1 (using 20 mm graded stone aggregate as in pre-cast cover slabs for manholes incl necessary form work set in CM 1:4 complete all as specified and as directed. (Reinforcement will be measured & paid separately) 73 S & F TMT bars 6mm dia and over upto and incl 8mm dia as in reinforcement, incl binding with and incl tying with MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed. 74 S&F 25 mm Gun metal Gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. 75 Takingout carefully copper/aluminium point wiring, Light, fan, socket or powercomplete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete all as specified and directed. 76 M&L Point wiring for one light point/exhaust fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulatedunsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable( green colour) as earth lead in and including PVC rigid conduit with all fittings for concealed type on stone / brick, masonary walls, roof etc including new CI/MS sunken box of required size and all as directed by Engineer-in-Charge & 3 mm thick plastic laminated sheet for housing switches sockets, regulators etc. including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified and as directed. 77 Supply and fix switch piano flush type single pole one way 5 Amps complete all as specified and as directed. 78 Supply and fix Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and as directed. 79 Supply and fix LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. 80 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. 81 S&F in repair Sheet metal enclosure MCB distribution board including 200 Ampsbus-bar single pole and neutral 240V, 8 Ways, double door including taking down of existing sheet metal enclosure complete all as specified and as directed. 82 S&F in repair 240V, 10 KA C curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissioning.complete all as specified and as directed. 83 S&F in repair 240V, 10 KA C curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed. 84 Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed. 85 M&L, in repair, earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I all as specified and testing on completion includingprovisionof earth lead protected by 15 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note:- Rate quoted by tenderers shall be deemed to include for following provisions-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 m. [ii].PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 15 mm bore light grade 7.5m.

Key Value

Document Fees
INR 500 /-
Tender Value
INR 31 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail