Tender For Repair To Joinery And Other Misc Work In Zone-I (A) Area Under Age B/R-Iv Of Ge(S) Jaipur At Jaipur Mil Stn; 1 M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. 2 M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. 3 M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as inlintels upto 1.5 m clear span, cills, copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges including necessary form workcomplete all as specified and directed. 4 M&L for PrecastReinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar work including necessary form work and set in CM 1:4 complete all as specified and directed. 5 M&L for applying bond coat of epoxy bonding agent & cement in 1:1 ratio for bonding old and new concrete on damaged surfaces after applying anticorrosive paint over cleaned rusted steel surface including demolition old RCC surfaces (chajjas, fins, beams , borders etc andapplying 30mm thick polymer modified mortar in CM 1:3 including mixing of polymer latex additives for repair of Chajjas fins, border etc complete all as specified and directed.Note :- (i)Cleaning of rusted part of steel and applying anticorrosive paint over it.(ii)Qty of ploymer to be used 15% by weight of the cement or as per manufacturer instruction. (iii)Use of electrical mixer to get the homogeneous dough on bond coat surfaces.(iv)To achieve required thickness repeat this step after 24 hrs as required.(v) Keep the surfaces moist using water fog for 5 to 7 days etc complete all as specified and as directed.(vi)Rate shall be inclusive of all necessary scaffolding for building of height upto two storey.Make :-(i) The epoxy bonding agent shall be Krishna / Dr Fixit / MC Bauchemie / M/s Cemistik / Sika or equivalent as approved by GE.(ii) Polymer latex addictive shall be of Sika / Fosroc / Dr Fixit or equivalent as approved by GE. 6 M&L brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. 7 M&L brick work using old size bricks with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. 8 M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good in Brick walls/RCC cutting not exc 10 cm girth complete all as specified and directed. 9 M&L for cutting holes in brick walls exc one brick but not exc two brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed. 10 M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granitecomplete all as specified & directed. 11 M&L for Neoprene / EPDM (Ethylene Propylene Diene Monomer) rubber gasket complete all as specified and directed. 12 Taking down chowkats or frames n.exc 1.5 Sqm each with shutters (without taking off shutters from the frames) including making good of disturbed portion except space for holdfast complete all as specified and directed. 13 Taking down chowkats or frames exc. 1.5 sqm but n.exc 4.0 Sqm each with shutters (without taking off shutters from the frames) including making good of disturbed portion except space for holdfast complete all as specified and directed. 14 S&F second class hard wood 35 mm thick glazed and skeleton shutters, (having 04 to 06 Nos of panel) open rebated and prepared to receive glass , gauze etc, divided into square,with plain, chamfered or rounded,mitered and rebated sash bars,any number, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed. 15 S&F35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commerical ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. 16 S&F 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, with both face are covered with decorative face veneer with lipping / frame to match complete all as specified and directed. 17 Taking down shutters of any description exc. 1.00 Sqm but n.exc. 2.00 Sqm each complete all as specified and directed. 18 Taking down shutters of any description exc 1.00 Sqm butnot exc 2.00 Sqm each and refixing in the same opening after repair such as easing and adjusting complete all as specified and directed. 19 Resecuring or easing & adjusting with out taking down shutters of any description exc 1.00 Sqm but not exc 2.00 Sqm each complete all as specified and directed. 20 S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as shown on drawing in section 8 of SSR-2020 Part-II complete all as specified and directed. 21 S&F for solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2020 Part-II complete all as specified anddirected 22 M&L for providing and fixing factory-made uPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 + – 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass Note: (i) Area should not exceed 1.00 sqm each.(ii) The unit rate quoted by contractor includes cost of glass and all other connected accessories. (iii) Net opening will be measured for payment purpose. 23 M&L for factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm) window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm),T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges ofzinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. Note: (i) Area not exceeding 1.00 sqm each.(ii) The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. (iii) Net opening will be measured for payment purpose. 24 S&Ffactory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.complete as directed For area not exceeding 2.00 sqm each(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) 25 S&Fhandles, stainless steel of 125 mm size, oval shape, fancy type complete all as specified and directed. 26 S&F 5 mm thick pvc panelling in back of cup board , one side prelam fixed with screws to make cup boardsincuding lipping to exposed surfaces with PVC strip as provide by manufacturer complete all as specified and directed. 27 S&F in stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet, cast & extruded section, fancy type, of 300 mm size complete all as specified and directed.Make : Ebco / Hettich / Ultima / Hafele or equvalent make as approved by GE. 28 S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) 30 mm size complete all as specified and directed. 29 S&F in repair 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. 30 S&F in repair door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight between 61 to 80 Kg of aluminium (die cast) body complete all as specified and directed. 31 S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. 32 S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. 33 S&F 100 mm long stainless steel butt hinges fixed with CP finish steel screws as in PVC door complete all as specified anddirected. 34 S&F in repair 25 mm bore dia mild steel coloured PVC laminated curtain rod fancy type with fixing brackets ,stops, rollers etc complete as all specified and directed. 35 M&L for auto close hinges, stainless steel, bright finish or electrogalvanisedfixed complete all as specified and as directed. 36 S&F stainless steel handles, fancy type, of 200 mm size complete all as specified and directed.Make : Ebco / Hettich / Ultima / Hafele or equvalent make as approved by GE. 37 S&F stainless steel (SS) tower bolts, fancy type, of size150 mm long complete all as specified and directed.Make : Hafele / Hettich / Ultima or equivalent make as approved by GE. 38 M&L for cupboard magnet, stainless steel, bright finish or electro-galvanised of size 55 x 29mm complete all as specified and directed .Make : Godrej, Hafele,Ultima,Hettich 39 M&L for cupboard lock, stainless steel, bright finish or electro-galvanised of size 64mm complete all as specified and directed . 40 S&F stainless steel, curtain rod holder, fancy type for 25mm dia curtain rod complete as all specified and directed. 41 S&F stainless steel handles, fancy type, of 100 mm size complete all as specified and directed.Make : Ebco / Hettich / Ultima / Hafele or equvalent make as approved by GE. 42 S&F stainless steel barrel tower bolts stove enamelled black with bright bolt200 mm long complete all as specified and directed. 43 S&F brass curtain rod bracket / end bracket for holding drapery rod of 25mm dia complete as all specified and directed. 44 S&F 18 mm thick (one side decorative lamination and other side balancing lamination ) solid PVC board with cement solvent adhesive for shutters, kitchen cabinet/ cup board /partition wall/ wall cabinet incuding lipping to exposed surfaces with PVC strip as provide by manufacturer complete all as specified and directed. 45 S&F in repair for steel window handles and peg stay etc. including welding if required complete all as specified and as directed. 46 S&F mild steel framed work for windows grills such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors / window and similar work conforming toFe -290 Gde E-165 complete all as specified and directed. 47 M&L for mild steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 48 S&F rolled mild steel section in roof trusses (framed), trussed, purlins, crane gantries,rail and fastenings and heavy bracket framing (beam, tee, angle,channel or flat sections) including distance pieces, cleat etc of gradeFe 410-W (Gde E-250) quality B complete all as specified and directed. 49 S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed. 50 S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with out glazing bars, dovetailed or welded complete all as specified and directed. 51 M&L for powder Coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. 52 S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed. Note:- Glass and other filling material in panels shall be measured and paid seperately. 53 S&F powder coated (thickness of powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, side hung / sliding type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21, 100 mm long (2 No) , suitable handle (1 No) complete all as specified and directed. 54 Taking down existing aluminium window single leaf of area n.exc 1.5 sqm including taking down all members, sheet glass of any thickness, cleat, neoprene rubber beading and resecuring / refixing all section & tightening all joints including fixing new small cleats of suitable size, fixing L-type cleats of stainless steel to secure joints of stiles and rails wherever necessary and refixing all members, sheet glass, aluminium cleat but new neoprene rubber beading (paid under separate item) and making the door shutter serviceable,including fixing the shutter on hinges complete all as specified and directed. 55 Taking down existing aluminium door single leaf of area exc 1.5 sqm but n.exc 4.0 sqm including taking down all members, sheet glass of any thickness, cleat, neoprene rubber beading and resecuring / refixing all section & tightening all joints including fixing new small cleats of suitable size, fixing L-type cleats of stainless steel to secure joints of stiles and rails wherever necessary and refixing all members, sheet glass, aluminium cleat but new neoprene rubber beading (paid under separate item) and making the door shutter serviceable, including fixing the shutter on hinges complete all as specified and directed. 56 M&Lfor taking down steel shutter of any description, area n.exc 1 Sqm each for repairing in any position (building upto three storey)by replacing the projecting type or any typehinges (Single pane) with new box type or pintle hinge including welding and refixing the shutter, making good the surfaces with the existing shutter after applying two coats of synthetic enamel paint over red oxide primer on new hinges or repair work complete all as specified and as directed. 57 S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed. 58 S&F as in repair of unserviceable 6mm diaround steel bar for Almirah large steel ( upto 2 m long ) as in support of locking device with 5 mm thick MS sheet cover platecomplete all as specified and directed. 59 M&L for suspended false ceiling (Make - ArmstongANF AH 95 or equivalent as approved by GE) of mineral fiber board, size of 600 x 600 x 15 mm ceiling tiles over suspension metal system (MICRO LOOK) designer grid (15 mm grid 8mm return) SILHOUETTE X L 15 MM (NOMINAL) of Make Armstorng or equivalent make including necessary hanging system arrangement which is required to be made from existing RCC roof /stone /slab /AC sheet of existing ceiling complete all as specified and directed. 60 M&L for machine cut kota stone slab flooring mirror finished 40-50 mm thick (each slab not less than 0.25 sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing andpolishing complete all as specified and directed. 61 M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. 62 M&L for 75 mm thick Cement concrete 1:3:6type C-2using 40 mm graded stone aggregate as in sub base complete all as specified and directed. 63 M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate, 75 mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed. 64 M&L for PCC 1:2:4 type B-0 using 12.5 mmgraded stone aggregate as in sub base flooring 25 mm thick surface finished even andrough to receive the topping layer complete all as specified and directed. 65 M&L for glazed ceramic coloured tiles in vertical surface350x 250x 7 mm / 450X 350X 7 mm / 300x 600x7 mm / 450x 300x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in CM 1:4 complete all as specified and directed. 66 M&L for joint free non skid coloured tiles of design as approved7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed 15 mm thick in CM 1:6 complete all as specified and directed. 67 M&L for non skid joint free ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. 68 S&F for rubber moulded machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement andpigment complete all as specified and directed. 69 Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing)and removing rubbish off the premises complete all as specified and directed. 70 M&L for rendering on fair faces of brick workor concrete surfaceof wall 15 mm thick in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed. 71 M&L for rendering on fair faces of brick workor concrete surfaceof wall 15 mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed 72 Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. 73 M&L for rendering 10 mm thick in CM 1:3 as in ceiling surface and finished even and smooth without using extra cement complete all as specified and directed. 74 M&L for rendering 15 mm thick onCM 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing wall in two layer , first layer 10 mm thick in CM 1:4 even and fair, and second layer 05 mm thick in CM 1:4 surface finished even and smooth including integral water proofing compound at rate of 03% by weight of cement or as per manufacturer specification complete all as specified and directed. 75 Removing old lime wash (if any), hacking for key, raking out joints of old brick work or stone work built in cement or cement lime mortar not previously plastered; and scrubbing down with water etc. to receive plaster complete all as specified and directed. 76 M&L for preparation of new surface of wall of any description and applying two coats of oil bound distemper (OBD) over and including 2mm thick wall putty complete all as specified and directed. 77 M&L for preparation of new surface of ceiling of any description and applying two coats of oil bound distemper (OBD) over a coat of chalk whiting on plastered surfaces preparatory to distempering over and including 2 mm thick wall putty all as specified and directed. 78 M&L for preparation of new plastered surfaces of wall and applying two cement based paint complete all as specified and directed. 79 M&L for preparation of newly plastered surfaces of walls and applying two coats ofexterior acrylic emulsion paint over a coat of primer including scaffolding upto three storey building complete all as specified and as directed.Make for Acrylic Emulsion Paint : Apex Ultima of Asian Paint / WeatherShield Max of Dulux / WeatherCoat Anti Dust of Berger or equivalent make as approved by GE.Note :- Acrylic Emulsion Paint shall be carried out as specified in clause 15.17of SSR Part-I including all necessary arrangement such as scaffolding / working plateform for execution of work upto four storey building etc. 80 S&F 3 mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed. 81 S&F 4.8 mm thicksheet glass, ordinary quality and glazing with oil putty in squareexceeding 0.5 Sqm in each pane, complete all as specified and directed. 82 S&F 3 mm thicksheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed. 83 Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone,concrete orbrick surrounds, glazed with putty of fixed with beads complete all as specified and directed. 84 M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 85 M&L for preparationof new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 86 S&F in repair kitchen plain basket of stainless steel size 520 x 485 x 100 mm of grade SS-304 complete all as specified and directed.Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE. 87 S&F in repair kitchen perforated cutlery basket of stainless steel size 17 x 20 x 4 of grade SS-304 complete all as specified and directed.Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE. 88 S&F in repair kitchen plate / thali basket of stainless steel size 520 x 485 x 100 mm of grade SS-304 complete all as specified and directed.Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE. 89 S&F in repair baskets guide channel of stainless steel suitable for running basket of grade SS-304, 50cm long and 30 to 40mm width including drilling over stone complete all as specified and directed. 90 S&F in repair kitchen cutlery & spoon basket (plain) of stainless steel size 520 x 485 x 100 mm of grade SS-304 complete all as specified and directed.Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE. 91 Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. 92 Demolition of stone slabs of any description or thickness, laid dry or laid dry and pointed in floor, apron etc complete all as specified and directed. 93 Demolition of cement concrete un-reinforced in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed. 94 Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. 95 Demolition of reinforced cement concrete (RCC) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and removal of rubbish from site complete all as specified and directed. 96 Dismantling of boarding, any description, fixed in any position with nails etc complete all as specified and directed. 97 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 98 Dismantling of AC corrugated / semi corrugated or translucent sheet as in roof coverings complete all as specified and directed.
