Tender For Increase Of Height Of Boundary Wall Of Gt Ground And Boundary Wall Of Certain Places At 2Afsb Mysore; 1 Excavating in post holes (or similar holes) each not exceeding0.5 cum, getting out hard soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified anddirected. 2 Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth and getting out in hard and dense soil complete all as specified anddirected. 3 Returning, filling in including spreading leveling watering and well ramming in layers not exceeding25 cm (soil) complete all as specified anddirected. 4 Removing excavation materials not exceeding50 mtr and deposition where directed at a level not exceeding 1.5 mtr above the starting point (soil) complete all as specified anddirected.. 5 Material & Labour forReinforced Cement Concrete Grade M-25 (Design mix) in foundations including rafts, footings, foundation beams, plinth beams, copings , bases for columns etc basement slabs, under reamed piles and mass concrete, complete all as specified anddirected. 6 Material & Labour forReinforced cement concrete Frade M-25 (Design mix)as in Columns, pillars, piers, posts and struts,complete all as specified anddirected. 7 Material & Labour forReinforced cement concrete Grade M-25 (Design mix)as in Beam, Roof beam, Tie beam, all complete all as specified anddirected. 8 Material & Labour for Precast cement concrete block masonry with blocks built in 1:3:6type C-1 (using 20mm graded stone aggregate) with solid blocks exceeding 10 cm in width and setting in Cement Mortor 1:4complete all as specified anddirected.. 9 Material & Labour for Cement concrete 1:2:4 Type B-0 (using 12.5mm graded stone aggregate) for copings including form work,complete all as specifed and directed. 10 Material & Labour for for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) in post holes or PCC work / mass concrete,complete all as specified anddirected. 11 Material & Labour forGranite (of any type) work(table rubbed and polished)in steps, jambs, pillars, window-cills, cooking platforms and screeding 15mm thick in cementmortar (1:4) including point ing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite. including grindingand polishing complete all as specified anddirected. 12 Material & Labour for form work for rough finished surfacesto side of concrete foundations, footings, bases of coloumns, raft and raft beams, sides and soffits (If any) of foundation and plinth beamsand similar work complete all as specified anddirected. 13 Material & Labour for Formwork tosides of pillars, posts, struts, piers, columns and stanchions fair finished, complete all as specified and directed. 14 Material & Labour for Formwork tosides of Beams, Roof beam, lintels fair finished complete all as specified and directed . 15 Material & Labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia for securing with clips quality conforming to deformed or twisted bars complete all as specified anddirected. 16 Material & Labour for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia for securing with clips quality conforming to deformed or twisted bars as in stirrups / spacers, complete all as specified anddirected. 17 Material & Labour forHand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencingincluding cutting tops to shapeas directed, drilling holes,notching for wire, etc.; flat ironfillets (for securing wire meshetc.) including all necessarydrilling,boltingor riveting, etc.,and similar work conforming toFe-290 Gde E-165complete all as specified anddirected. 18 Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wirecomplete all as specified anddirected. 19 Supply only Chain link MS galvanisd fencing, any size or typecomplete all as specified anddirected. 20 Material & Labour for Framed work as in doors orgates of angle or other sectionwith gusset plates, rails,braces, etc., complete, drilled forfixing of steel sheeting or othercovering. Doors, etc. to beprepared for hanging or slidingwith and including either hooksand hinges or steel hangingdoor fittings (exclusive of steelsheeting or other covering,running rails and guides) andhanging; also fastening andfixingcomplete all as specified anddirected. 21 Material & Labour for galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified anddirected. 22 Supply & Fixing for Galvanised Mild Steel concertina double coil fencing of 600mm dia, centre to centre barb distance 48mm, thickness of strip 0.50mm, length of barb 10.50. Dia of spring wire 2.50mm, number of spiral (No of turns)50/51 per coil, clips per spiral 5, approximate weight 8.50 Kg /Coil(Recommended coil stretch length 6m) and conforming to IS all as per manufacturers instructions, complete all as specified anddirected. 23 Supply & Fixingfor pre- painted galvatume aluminum zinc coating GIbased corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roofcovering/cladding to wall, fixed with self tapping screwscomplete all as specified anddirected. 24 Taking down cement or cement plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. 25 Material & Labour for for 15 mm thick cement plaster in cement mortar 1:4 on brick or concrete surfaceof walls, surface finished fair and even without using extra cement, all as specified and directed. 26 Complete removal of existing treatment of wall including cornices and applying two coats of cement based paintcomplete all as specified anddirected. 27 Material & Labour for for preparation of plastered and other surfaces with alkali resistant priming paint new plastered surface on walls and applying two coats of cement based paint complete all as specified and directed. 28 Material & Labour for Preparation of painted surfaces of walls, chajjas, facia, column and roof projections and applying one coat of premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance, Alkali & fungal resistance, dirt resistance exterior paint of required shade and colour,complete all as specified anddirected. 29 Material & Labour for preparation steel surfaces with two coats of Synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. 30 Dismantling wrougt iron or mild steel work of any description not other wiseprovided for (steel gate & Y angles etc) including stainless steel letters in the board complete all as specified anddirected. 31 Demolition of reinforced cement concrete in ground floor and paving (reinforcement cut as required tto facilitate demoliton) complete all as specified and directed. 32 Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articlescomplete all as specified anddirected. .
