Tender For Provision Of Certained Sanctioned Work At Haft Chinar Under Ge 970 Ews; 1 M & L for taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. 2 M&L15 mm thick cement plaster on fair faces of bricks or concrete wallsin CM 1:6 finished even and smooth with out using extra cement on brick work or concrete surfaces complete all as specified. 3 M&L15 mm thick cement plaster on other than fair facesof bricks or concrete wallsin CM 1:4 finished even and smooth with out using extra cement on brick work or concrete surfaces complete all as specified. 4 M & L for preparation of new plastered surfaces of wall and applying two coats ofoil bound distemper using painting rollerover 3mm thick wall care putty complete all as specified and as directed. 5 M & L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resisitant primer complete all as specified and as directed. 6 M & L for preparation ofold wooden surfaces ofany description not other wise decribed over 10 cm width or girth by scrubbing down, removing loose dirt or dust and applying two coats of synthetic enamel paintover prepared old wooden surfaces complete all as specified and as directed. 7 S & F PVC connections 15mm size with PTMT nuts of length 450 mm complete all specified and directed. 8 M & L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing tubing complete all as specified and as directed. 9 M & L for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing tubing complete all as specified and as directed. 10 S&F in repair 15 mm bore dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. 11 S & F bib taps 15mm dia fancy type brass Chromium Plated with long body screwed down for iron pipe and fixed in repairs complete all as specified. 12 M&LLagging to pipe of internal dia15mmpipes used ininternal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum Extra over if provided with chicken mesh wire netting 25 gauge, 20mm meshconforming to IS 9842 complete all as specified and as directed . 13 M&LLagging to pipe of internal dia 20 mmpipes used ininternal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum Extra over if provided with chicken mesh wire netting 25 gauge, 20mm meshconforming to IS 9842 complete all as specified and as directed . 14 S&F 15 mm bore dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified. 15 M & L for 75mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed 16 S & Fin repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. 17 S&F in repair for 15 mm diastop valves fancy type ,chromium platedscrewed down high pressure with crutch or butterfly handle complete all as specified and as directed. 18 S&F in repair vitrious china white wash hand basin flat back white in colour ISI marked of size 550mm x 400mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI breckets 2 Nos embedded in CM 1:4 typecomplete all as specified. 19 S&F in repairs viterous china squatting pan Orrisa pattern size 580 x 440mm white with P and S trap front or back inlet etc including connectipon to trap and to flishing to pipe , anti syphonage pipe etcincl provisioning of lime concrete complete all as specified. 20 S&F in repairs 10 ltr PVC valveless syphonic action type flushing cistern with brackets flush pipe etc complete including inlet ball valve float and handle including brackets of approved make including all connections & flush pipes for WC complete all as specified. 21 S&F in repair for 450mmx600mm bevelled edge looking mirror of selected quality fixed with brass CP screw fixed with back side of decorative boardincludind aluminum beading complete all as directed. 22 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 23 M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exc 0.11 but not exc 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 15mm cement screed bedin CM (1:6) completeall as specified. 24 M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exc 0.18 but not exc 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 15mm cement screed bedin CM (1:6) completeall as specified. 25 M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) as in skirting cut from tiles of size exc 0.18 but not exc 0.38 Sqmetc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick rendering in CM (1:6) completeall as specified. 26 M&L for glazed white ceramic tiles in vertical surfaces such as skirting /dados and riser to steps area of tiles 450x300x7mmthickset and jointed and pointing in white or coloured cement to match over 10 mm thick plaster in CM 1:4 complete all as specified and directed. 27 M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment complete all as specified. 28 M & L for 25mm thick cement concrete 1:2:4 type B-1, using 20mm graded aggregate complete all as specified and as directed. 29 Taking down Chowkhats or frames not exc. 1.5 but with shutters (without taking off shutter from the frames) complete all as specified. 30 Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame) complete all as specified. 31 Supply andfixing for aluminium alloy anodized (powder-coated) door frame and shutters with hollow aluminium anodized sections as specified including aluminium alloy anodized snap type beads, dish type door handles, glazed clip joint cleats, rubber gasket, dead lock 4 levers, two numbers of aluminium alloy anodized tower bolts to each leaf etc. including fixing frame to wall/RCC members with rawl plugs complete. Sections of doors shall be aluminium hollow sections as follows : - (a)Door Frame single groove 101mmx44mmx3mm thick(b)Shutter top 80mmx44mmx3mm thick.(c)Shutter bottom 110mmx44mmx3mm thick (d)Shutter vertical 80mmx44mmx3mm thick (e)Shutter middle 80mmx44mmx3mm thick.(f) Gauging clip weighing not less than 0.097kg/metreNote : The rates shall be inclusive ofprovision of and fixing of rubber packing/gasket. Glass pane shall be measured and paid separately.. 32 Supply andfixing for aluminium alloy anodized (powder-coated) window frame with double shutters open able type, with aluminium sections as per of “Jindal” section numbers for casement windows with double shutters including aluminium alloy anodized snap type beads, handles, aluminium anodized barrel tower bolts and glazing clip, joint cleats, rubber gaskets etc., complete all as specified for series-B “ Jindal” section numbers for casement (a)Frame of section 101.6mmx44.45mmx2.10mm thick and section for shutter 47.62x44.45x1.95 mm thick(b)Mullion 53mmx52mmx 2mm thick not less than 1.065 kg/mtr.(c)Glazing clip weighing 0.259kg/mtr. (d)Windows shall be provided with 02 Nos. of tower bolt for single leaf and 03 Nos. of tower bolts for double leaf. Tower bolts shall be aluminium alloy anodized weighing 0.302kg/mtr. Handles shall be aluminium anodized ‘D’ type handle of size 98mm and thickness 2.37mm weighing 0.875kg/mtr and one no per each open able leaf shall be provided. Note : The rates shall be inclusive ofprovision of and fixing of rubber packing/gasket. Glass pane and wire gauge shall be measured and paid for separately. 33 M&L for ACP board for fixing in aluminium partition and doors complete all as specified and as directed. 34 S & F solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed. 35 S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. 36 M & L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges , in lintels upto1.5m clear span,cills,steps; seismic and other similar bands, plinth courses, string courses, lacing courses parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering,slightly rounded or chamfered angles and throating, as directed. 37 S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones 38 S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, but 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed. 39 S&F 150 mm aluminium handles, cast type, anodised complete all as specified and directed. 40 S&F 125 mm aluminium handles, cast type, anodised complete all as specified and directed. 41 S&F 200 mm long aluminium , anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed. 42 S&F 150 mm long aluminium , anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed. 43 S&F in repair 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 44 S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. 45 S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including dismantling of existing pipes complete all as specified and as directed. 46 S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified 47 S & F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including dismantling of existing pipes ccomplete all as specified and as directed. 48 S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified 49 S & F Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed 50 S&F 500 Ltr Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. 51 S & F in repair for ISI Marked 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. 52 M & L for 6mm verneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face decrorative veneer and one face plain of required texture & colour fixed with nails to timber frame work for any surface with and including dismantling wall and ceiling boards of an description complete all as specified and directed. 53 M & L for brickwork with sub-class `B` bricks, straight or curved on planexc 6m mean radius built in CM 1:4 including demolition of brickwork complete all as specified and directed. 54 M&L for Dismantling timber scantlings 40 sq. cm and over in section, in any position complte all as specified. 55 M&L for second class soft wood timber framed and fixed, clean swan in scantling complete all as specified and directed. 56 Dismantling boarding , any description fixed in any position with nails complete as specified and directed 57 S & F in repair second class softwood 30 mm thick boarding and fixed with nails in any situation clean sawn with butt joints complete all as specified and directed. 58 Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coveringsccomplete all as specified and directed. 59 S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 60 S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 61 Preparation of new surfaces of steel any description over 10 cm width or girth andapplying two coats of synthetic enamel paintover a coat of red oxide primer all as specified. 62 Demolition Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for as in mangers complete all as specified and directed. 63 M&L, 75 mm thick PCC (1:3:6) C-2 using 40mm graded stone agg in path/plinth protection finished even & smooth completed W/O using extra cement complete all as specified and directed. 64 M & L for 75mm thick cement concrete 1:4:8 type D-2, using 20mm graded aggregatecomplete all as specified and directed. 65 M&L for providing cement concrete 1:2:4 B0 using 12.5 mm graded aggregate in lintels upto 1.5 m clear span, cills, steps;seismic and other similar bands, plinth courses, string courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water roughsand the like incl weathering, slightly rounded or chamfered angles and throaying, complete all as specified and directed. 66 S & F 30mm thick, 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with comercial face veneers; fitted to chowkats complete all as specified and directed. 67 S & F 30mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); fitted to chowkats complete all as specified and directed. 68 S&F 2nd class hardwood Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. 69 S & F 1.25 mm thick steel rolling shutters, without ball bearing as specified incl top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, but gear operated type with bevel gear box and crank handle complete all as specified and as directed. 70 S&F in stainless steel Butt hinges 75mm size, medium weight, complete all as specified and directed. 71 S&F in stainless steel Butt hinges 100mm size, medium weight, complete all as specified and directed. 72 S&F in extrudedAluminium alloy handles 100mm size, cast type, anodised complete all as specified and directed. 73 S&F in extrudedAluminium alloy handles 150mm size, cast type, anodised complete all as specified and directed. 74 S&F in Aluminium, anodised, barrel tower bolts 100mm long of extruded section complete all as specified and directed. 75 S&F Mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate complete 76 Dismantling timber in fillets, rails, posts,raffers, purlins, etc. under 40 sq. cm in section complete all as specified. 77 M&L for second class softwood clean sawn plain fillets, square, rectangular or triangular in section and secured with nails or brads, sectional area exc 6 sq.cm and not exc 13 sq.cm, complete all as specified and directed. 78 M&L for second class softwood clean sawn timber fixed in scantling complete all as specified and directed. 79 Dismantling wall and ceiling boards (fibre pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified. 80 M&L for 6 mm thick(5 No of Ply) plywood, grade BWR, type BB , fixed with screw to timber frame work complete all as specified and directed. 81 S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; incl bedding in cement mortar on to dwarf wall or incl fixing cantelever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed. 82 M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all specified and directed. 83 Taking down Shutters of any description but exc 1 sqm n. exc 2 sq. m each complete all as specified and directed. 84 S & F in repair second class softwood 15 mm thick boarding and fixed with nails in any situation clean sawn with butt joints and Fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar complete all as specified and directed. 85 M & L for second class soft-wood, timber framed and fixed, clean sawn, in scantlings complete all as specified and directed. 86 Excavating in post holes (or similar holes) each n exc 0.5cu. M, getting out, returning, filling in and ramming earthor broken rubble mixed with earth around, in layers not exceeding 25cm, complete all as specified. 87 Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed 88 M & L forPCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundations fillings and mass concrete compete all as specified 89 Supply only integral waterproofing compound complete. 90 M&L for 4 mm thick(3 No of Ply) plywood, grade BWR, type BB , fixed with screw to timber frame work complete all as specified and directed. 91 S&F 75 mm long aluminium bow handles cast type anodised complete all as specified and directed. 92 S&F 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. 93 S&F 75 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. 94 Supply and fix bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed 15 mm fixed in repair complete all as specified and as directed. 95 Supply and fix stop cock, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, high pressure screwed both endsfor iron pipe or for unions and fixed 15 mm fixed in repair complete all as specified and as directed. 96 Supply and fix PVC connection with brass ferrules, 60 cm long for wash basins and flush tanks as in repairs complete all as specified and directed. 97 Supply and fix PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement fixed in repairs complete all as specified and directed. 98 Supply and fix PVC (SWR) vent cowl 110 mm bore complete all as specified and directed. 99 S&F rotational moulded polythylence water storage tanks 500 Ltr cylindrical vertaical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 500 ltrs including disconnecting the unserviceable existing tanks including ball brass valves 20 mm bore high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferruleincluding dismantling unsv water tanks exc 500 ltr but not exc 1000 ltrs all as specified and directed 100 Excavating in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth,in soft and loose for foundation etc.or for shafts,wells,drain pipes n.exc10sqm on plan and getting out complete.all as specified and directed. 101 Returning, filling in , including spreading, levelling, watering and well ramming in layers not exc25 cm thick.complete all as specifed and directed. 102 S&F for 20 mm thick second class softwood clean sawn with butt joints boarding with nails in any situation and incl dismantling boarding any description complete all as specified. 103 Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. 104 M&L for Hardcore of gauge n exc. 63mm, deposited, spread andlevelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed. 105 M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed. 106 M&L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded aggregate as in sub base of floor all as specified. 107 M & L for brickwork with sub-class `B` bricks, straight or curved on planexc 6m mean radius in half brick built in CM 1:4complete all as specified and directed. 108 M&L for damp proof course to horizontal or vertical surfaces includin necessary formwork 40mm thick in cement concrete1:2:4 type B0 complete all as specified. 109 M & L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floorscomplete all as specified and as directed by the Engineer-in-Charge 110 M & L for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by the Engineer-in-Charge 111 M & L for 1000 Liters rotational moulded polythene water storage tank (cylindrical verticle with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed. 112 S & F for vitreous china urinal, half stall type (white) including waste coupling flushing cistern flush pipe,spreder and waste pipe.complete all as specified and as directed. 113 Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting outexisting benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as require complete all as specified and as directed. 114 M&L for concrete bed to drain pipes 100mm bore incl forming cradles in cement concrete 1:3:6 type C2 Complete all as specified and as directed 115 S&F in repair for 20 mm diastop valves fancy type ,chromium platedscrewed down high pressure with crutch or butterfly handle complete all as specified. 116 M & L for providing precast RCC 1:2:4 type B1 using 20mm graded aggregate as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete with joints to match, except blocks or slabs complete all as specified and directed. 117 M&L for sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty in square not exc. 0.5 m in each pane complete all as specified. 118 M&L for TMT Bars 8mm dia and over in reinforcement,cut to lengths, bent to shape required ,including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia or securing wth clips complete all as specifed and directed. 119 M&L TMT Bars 10mm dia and over in reinforcement,cut to lengths, bent to shape required ,including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia or securing wth clips but 5 mm dia and over upto and incl 10 mm dia in stirrups, spacers and binders complete all as specifed and directed. 120 Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified. 121 M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming toFE-410 GDE 250 complete all as specifed and directed. 122 Taking down copper/alluminium point wiring (light,fan,socket or power) complete by removing all switch, socket,ceilling rose,pendants, light fitting and making good the distributed surfaces of walls, floors as existing complete all as specifed and directed. 123 Taking down old and UNSV, DB any type including changeover, fuses, MCBs etc., after removing all connection and make good the distributed surface complete all as specifed and directed. 124 Point wiring using FRLSH PVC Insulated unsheathed, multi stranded copper conductor cable 1.5 sqmm drawn through and including PVC casing & caping with mild steel modular sunken box and bakelite sheet 3mm thick including all fittings i.e. tees, bands and junction boxes etc., complete for one light/ fan/exhaustpoint/ bell point controlled by one switch 5 Amps one way, using the cable of (1.5 sqmm for phase and neutral and 1.5 sqmm earthing) complete all as specifed and directed.Note:- (a) wiring shall be done by using colur cording (b) Earth wire shall be of green colour. 125 Description all as per ser item No 124 above but for one socket outlet 5 Amps on same board using cable 1.5 sqmm for phase,neutral and earthingcomplete all as specifed and directed. 126 Description all as per ser item No 124 above but for one socket outlet 5 Amps on indep board using cable 1.5 sqmm for phase,neutral and earthingcomplete all as specifed and directed. 127 Description all as per ser item No 124 above but for one socket outlet 15 Amps on independant board using cable 2.5 sqmm for phase,neutral and earthingcomplete all as specifed and directed. 128 Sheet metal enclosure single door for DBs when MCBs to be used SPN-8 way with 200 Amp rated bus bar complete all as specified and directed 129 S&F in repairs for MCB SPN 32 Amps, 240 V 10KA C curve in the MCB DB complete with connection testing and commissioning. 130 S&F in repairs for MCB SP 6 TO 32 Amps 10 KA 240 V B curve in the MCB DB complete with connection testing and commissioning. 131 S&F in repairs Switch socket combination 3 pin 16A,flushtype complete all as specifed and directed. 132 S&F in repairsSwitch socket combination 2in 1,6Aflushtype complete all as specifed and directed. 133 S&F in repairs Socketoutlet 3 pin, 6A, flush type complete all as specifed and directed. 134 S&F for switch piano flush type 5Amps one way complete all as specifed and directed. 135 S&F in repairs ceiling rose 3 terminal size 50 x 65 mm surface type complete all as specifed and directed. 136 S&F 1x20 W LED 6000K (4 ft) decorative ultra slim sqare profile linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient, extruded aluminium body heat shrink, provided for efficient dissipation and integrated electronic driver complete with lamp complete all as specifed and directed. 137 M & L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not lessthan 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion 138 M&L Sub main wiring complete with copper conductor, multi sranded, FRLSH,PVC insulated and sheathed,6 sqmm, two run 1100 volts grade, incl drawn through PVCsutable size conduit and 6 sqmm single run for earthing complete all as specifed and directed. 139 Supply and fixing in repairWall mount fan complete with accessories, 230 V, 450 mm sweep, 1300 RPM Min air delivery 60 CMM with service value 6.00 BEE. Five star rated complete all as specified and directed.. 140 Taking down old unserviceable exhaust fan and deposited to E/M store and supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specifed and directed. 141 S & F in repair of Integral LED street light luminaires complete comprising of epoxy powder coated housing, enclosed with glass cover in front 60W mounted on MCPCB suitable for 50mm dia pipe in gress protection IP-66 complete all as specified and as directed. 142 Sheet metal enclosure single door for DBs when MCBs to be used SPN-4 way with 200 Amp rated bus bar complete all as specified and directed 143 S&F frepairs Modular switch 1 way 6A,1 module complete all as specifed and directed. 144 Supply and Fixing of Flameproof cum Waterproof LED Bulk Head light fitting of 30W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen A clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specifed and directed. 145 Supply and fixing in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). 146 S & F stepped type electronic fanregulator flush type on the existingphenolic laminated sheet etc complete all as specifed and directed. 147 Material & labour for point wiring complete with singlecore 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLSH)drawn through and including PVC surface conduit 19/20 mm bore (ISI marked) and accessories , terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum)fixed with nickel polished screws with washers, earth continuity PVC cable(FRLSH), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly for One light point/Fan poink/Exhaust fan controlled by one way switch 5 Amps complete all as specified and directed complete all as specified. 148 Description all as per ser item No 147 above but socket out let 3 pin, 5 Amp on independent board. 149 Description all as per ser item No 147 above but with 2.5 sqmm copper conductor cable for socket out let 3 pin, 15 Amp on independent board with other switch. 150 Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. 151 Supply and fixing of Single Pole and Neutral, Single Door, 240 V, 8 way Sheet Metal Enclosure for MCBs complete all as specified and directed. 152 Supply and fixing in repair electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. as specified and directed. 153 M&L for river sand cushioning to underground cables 8cm thick before laying cable and 15cm thick after laying and streching the cable, complete all as specified and directed..Note :- For payment purpose punned thickness shall be measured 154 M&Lfor brickwell burntlocallyavailablesubclass B laid over sand cushioningtocableintrencheskeepingwidthofbrickparalleltothelengthofcable complete allasspecifiedanddirected. 155 M & L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 2 Core complete all as specifed and directed. 156 Supply and Laying of PPR pipes 3- layer SDR 7.4 of outer diameter of pipes as following UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply all PPR plain& brass threaded polypropylene random fittings laid in trenches including fittings and testingcomplete all as specified and directed. Size of(a) 20 mm dia. 157 (b) 25 mm dia. 158 M&L for construction of Brick Masonry valve chamber of size 600x600x600mm (Internal dimensions) with PCC 1:4:8 foundation 150mm thick, brick work built in CM 1:6, PCC 1:3:6 coping 50mm thick, plastering 15mm thick in CM 1:6 to all internal and exposed surfaces including excavation earthwork in hard/dense soil, MS sheet cover 4mm thick and MS equal angle iron 50mmx50mmx6mm frame as per existing sizewith locking arrangement embedded in PCC suitable for 25/40/50mm gate valve and painting to MS cover with two coats of synthetic enamel paint over one coat of red oxide primer etc complete including dismantling old/damaged valve pits complete all as specifed and directed. 159 Making connection of PPR 25 mm dia distribution branch with PPR main ofsizes 40 mm to 75 mm by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed. 160 Supply and fixing PPR gate valve (brass insert) of size 20 mm dia including connection and testing complete all as directed. 161 Supply and fixing PPR gate valve (brass insert) of size 25 mm dia including connection and testing complete all as directed. 162 S&F GI Flat strip clamps of size 25mm x 3mm duly bended as per the size of GI tubing and site condition,drilled complete all as specifed and directed. 163 M&L15 mm thick cement plaster on other than fair facesof bricks or concrete wallsin CM 1:4 finished even and smooth with out using extra cement on brick work or concrete surfaces incl WPC complete all as specified.Note: WPC shall be measured and paid under respective item of BOQ herein before. 164 Notes :- Amount of Credit Schedule for Schedule A Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum
