Tender For Annual Civil Maintenance Works At Hri, Prayagraj
Tender Value
12 Lakhs
Estimated cost
Bid Submission
16 Oct 2025
0 days left
EMD
24000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
prayagraj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Civil Maintenance Works At Hri, Prayagraj
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil |
| 2 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 3 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate |
| 4 | Supply of steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, railings, brackets, gates a similar works. |
| 5 | Vector Control treatment in HRI Campus Through approved pest control company. |
| 6 | SPRAYING:- K-Othrine flow (Deltamethrin 2.5% SC) or other suitable chemical, W.H.O. Approved in the entire out door target area of approx. 7000 sqm around the Building in the campus including all materials, labour Tools and plant - This work should be carried out by Experienced agency in the concerned field. |
| 7 | FOGGING:- fogging with KING-FOG or other suitable chemical, W.H.O. approved in the entire out door target area approx. 10000sqm around the building in the campus including all materials, labour Tools and plant. This work should be carried out by Experienced agency in the concerned field. |
| 8 | Supply & fixing 25 mm thick factory made solid PVC profile paneled door single piece extruded profile non decorative finish. |
| 9 | Providing & Applying polymer modified, flexible cementations waterproofing coating with elastic waterproofing polymers onwall surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping old plaster surface and redoing the plaster of requiredthickness withfixing wire mesh complete in all respect as per the direction of Engineer-in-Charge. |
| 10 | Supply of 18 mm tk. Grade-II NovapanBoard one side white & other side decorative grain. |
| 11 | Supply of 0.6 mm sunmica |
| 12 | White colour |
| 13 | Wood colour |
| 14 | Supply of 20mm PVC edge bit |
| 15 | Supply of 18mm piyano hinge |
| 16 | Supply of 50 mm wide flat rubber beading for door sil |
| 17 | Supply of bright finished brass night latch of approved quality including necessary screws etc. complete (Make: Godrej) |
| 18 | Supply of Mirror including all accessaries and moulding of edg of completeof superior make glass 60x45 |
| 19 | Supply of chicken Mesh |
| 20 | Supply of Multipurpose lock(Make: Godrej, Dorma) |
| 21 | Supply of Ded lock 6 lever (Make: Godrej, Dorma) |
| 22 | Supply ofaluminium door stopper |
| 23 | Supply ofaluminium sheet |
| 24 | Supply ofCP towel rod600 mm length |
| 25 | Supply ofC.P. towel Ring 230mm |
| 26 | Supply of U Rubber Beading / neoprene gasket from existing glazing in aluminum door, window, ventilator shutter and partition works etc |
| 27 | Supply of door closure (Make: Godrej, Dorma) |
| 28 | Supply of Chromium plated Brass curtain rods :20 mm dia (heavy type ) |
| 29 | Supply of 12 mm commercial ply |
| 30 | Supply of Stainless steel wire gauge (Grade-304) aperture 1.4 mm and 0.50 mm dia wire |
| 31 | Supply of5.5 mm tk. float glass panes (Make: Triveni) |
| 32 | Supply of 35 mm thick flush door(Make: Dock, Century, Green ply) |
| 33 | Supply of second class teak wood |
| 34 | Supply of C.P. Brass long body bibcock 15 mm (Make: L&K, Hindware, Jaguar) |
| 35 | Supply of C.P. Brass angle valve 15 mm (Make: L&K, Hindware, Jaguar) |
| 36 | Supply of Class B, G.I. pipes 20 mm dia (Make: Jindal, Tata, Surya) |
| 37 | Supply of Class B, G.I. pipes 25 mm dia (Make: Jindal, Tata, Surya) |
| 38 | Supply of Class B, G.I. pipes 40 mm dia (Make: Jindal, Tata, Surya) |
| 39 | Supply of Class B, G.I. pipes 50 mm dia (Make: Jindal & Tata, Surya) |
| 40 | Supply of White plastic seat (solid) for E.W.C. with lid C.P. brass hinges and rubber buffers(Make: Cera, Hindware, Parryaware) |
| 41 | Supply of Vitreous china orrisa type W.C. pan size 580 mm (Make: Cera, Hindware, Parryaware) |
| 42 | Supply of Vitreous china pedestal type water closet (Make: Cera, Hindware, Parryaware) |
| 43 | Supply of Vitreous china flat back wash basin 600x480 mm (Make: Cera, Hindware, Parryaware) |
| 44 | Supply of central hole basin mixer with chrome finish-(Make : L&K, Hindware, Jaguar) |
| 45 | Supply of wall mixture for sink with chrome finish-(Make : L&K, Hindware, Jaguar) |
| 46 | Supply of cistern handle as per requirement based on fitted cistern |
| 47 | Supply ofCP shower rose 5\" dia with 9\" Arm |
| 48 | Supply ofcistern washer (Make : Commander) |
| 49 | Supply of 15 mm C.P. brass short body bib tap multipurpose (Make: L&K, Hindware, Jaguar) |
| 50 | Supply of Brass spendal for bib tap (Make: L&K) |
| 51 | Supply of CP Brass Health faucets with lead 1.5 mtr. (Make: L&K, Hindware, Jaguar |
| 52 | Supply of C.P. Brass Waste Coupling 38/40 mm (Make: L&K, Hindware, Jaguar) |
| 53 | Supply of SS heavy 4\" Sink coupling |
| 54 | Supply of C.P. Brass- Bottle Trap 31/32 mm (Make: L&K, Hindware, Jaguar) |
| 55 | Supply of 50 mm nominal bore gun metal gate valve with C.I. wheel , quality as approved by Engineer in Charge (Make: Zoloto, Leader) |
| 56 | Supply of 40 mm nominal bore gun metal gate valve with C.I. wheel , quality as approved by Engineer in Charge (Make: Zoloto, Leader) |
| 57 | Supply of 25 mm nominal bore gun metal gate valve with C.I. wheel , quality (Make: Zoloto, Leader) |
| 58 | Supply of 20 mm nominal bore gun metal gate valve with C.I. wheel , quality (Make: Zoloto, Leader) |
| 59 | Supply of 15 mm nominal bore gun metal gate valve with C.I. wheel , quality(Make: Zoloto, Leader) |
| 60 | Supply of Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with fitting, accessories and flush pipe) (Make:Parryware, Hindware, Cera) |
| 61 | Supply of Double action hydraulic floor spring with brass cover plate (Make: Godrej, Dorma) |
| 62 | Supply of 1/2\"x 18\" C.P. pipe |
| 63 | Supply of 1/2\" C.P. Gyser connection pipe for hut/cold water 600\" mm |
| 64 | Supply of 1\" PVC ball cock float valve assembly (Make: Prayag) |
| 65 | Supply of MS. D jointer for 80 mm GI pipe line |
| 66 | Supply of MS. D jointer for 50 mm GI pipe line |
| 67 | Supply of GI fitting |
| 68 | Elbow 50mm n/b |
| 69 | Tee 50mm n/b |
| 70 | Socket 50mm n/b |
| 71 | Nipple 50mm n/b4 inch |
| 72 | Union 50mm n/b |
| 73 | Plug 50mm n/b |
| 74 | Elbow 40mm n/b |
| 75 | Tee 40mm n/b |
| 76 | Socket 40mm n/b |
| 77 | Nipple 40mm n/b 4 inch |
| 78 | Union 40mm n/b |
| 79 | Plug 40mm n/b |
| 80 | Elbow 25mm n/b |
| 81 | Tee 25mm n/b |
| 82 | Socket 25mm n/b |
| 83 | Nipple 25mm n/b 4 inch |
| 84 | Union 25mm n/b |
| 85 | Plug 25mm n/b |
| 86 | Supply of Cement |
| 87 | Supply of Course Sand |
| 88 | Supply of 12mm stone aggregate |
| 89 | Supply of Mason |
| 90 | Supply of unskilled Labour (as required with mason and other) |
| 91 | Supply of Semi-skilled Helper (cleaning of water tank & other maintenance work ) |
| 92 | Supply of Welder with assistant & required equipment like welding machine electrode, wireetc. |
AI Tender Summary
Tender Timeline
Oct 04, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 17, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender