Tender For Provision Of Tubewell And Water Supply Pipe Line For Bn Hq At Bsf Campus Alipur, Alwar Under Ftr Hq Bsf Rajasthan (Sh Electrical Works)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Oct 2025
0 days left
EMD
15445
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
alipur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Tubewell And Water Supply Pipe Line For Bn Hq At Bsf Campus Alipur, Alwar Under Ftr Hq Bsf Rajasthan (Sh Electrical Works)
BOQ
| Sl. No. | Item Description |
| 1 | Designing, Fabrication Supply/ installation/ testing and commissioning of compartmentalized type outdoor feeder pillar, double door made out of 2.03 mm thick CRCA powdered coated sheet having 300 amps, 04 nos insulated aluminium bus bars and to accommodate following accessories, front & back openable door with proper hinges, R-Y-B LED indicators and P & F of internal connection with suitable size of copper wires, following accessories & angle iron frame of suitable size with 600 mm long legs made out of 50 mm x 50 mm x 5 mm thick angle & grouting the same in suitable cement concrete foundation, arrangement for incoming & outgoing cables, cable termination, earthing, locking, interconnection etc. as required. (CPRI Approved builder). The feeder pillar should have Indicating lamp (LED type) 22.5 mm 230 volt AC Red, Yellow and blue make L&T/Havells/simens- 03 nos, CT Ratio (Amp) 100/05, accuracy class 1, burden 05 VA - make L&T/AE/Trinity -03 nos, Digital Multifunction meter (VAF + PF) make L&T Cat no. WC411011OOOO or equivalent in AE/Siemens- 01 No, Earth studs on both side. The feeder pillar should have provision to accommodate 80Amp 4 Pole MCCB-1 No, Star delta starter in each feeder pillar. The design of the feeder pillar should got approved from Competent Technical authority before fabrication.(The Fp should be of approx size 700 x 700 x 400 mm deep =2 Nos (area of Feeder pillar is taken in sq mm face area). |
| 2 | Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of I.I kV grade , confirming to IS : 7098 (Part-I) 1988 of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. (ISI marked Make Havells /Polycab/ Finolex /KEI /RR Kabel) (i) 3.5 x 35 sqmm. |
| 3 | Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of I.I kV grade , confirming to IS : 7098 (Part-I) 1988 of following size in the existing masonry open duct / along pole / loose/loop/ HDPE/RCC/ HUME/ METAL pipe for connections etc as required. (ISI marked Make Havells /Polycab/ Finolex/RR Kabel/KEI(i)3.5 x 35 sqmm. |
| 4 | Supplying and laying of 3 core 10 Sq. mm Flat Three Core PVC Insulated & PVC Sheathed Industrial Cable in existing borewell alongwith existing GI Pipe for Submersible pump (make KEI/Havells/polycab/RR cable/Finolex). |
| 5 | Providing and fixing of following rating and breaking capacity and pole MCCB with thermomagnetic release in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 80 Amp, 18 KA, 4 Pole MCCB.(Make L&T/ Havelis/C&S). |
| 6 | S/1/T/C of fully Automatic Star delta Starter in the existing panel, having specification relay rang 20 - 32 Amp, Motor protection relay (Preventer) for Single phasing, Phase reversal, Current, overload, Earth fault, suitable for 3 phase, 415 v, 50 Hz 20 HP(Heavy duty)Submersible/mono- block pump/ motor, model - MU-G20H FASD (Heavy duty) of L&T make or equivalent to Havells/ CG). |
| 7 | S/I/TIC of fully Automatic Star delta Starter in the existing panel, having specification relay rang 13-21 Amp, Motor protection relay (Preventer) for Single phasing, Phase reversal, Current, overload, Earth fault, suitable for 3 phase, 415 v, 50 Hz 15 HP (Heavy duty)Submersible/mono- block pump/ motor, model - MU-G20 FASD of L&T make or equivalent to Havells/ CG). |
| 8 | Maintenance free gel earthing with pipe in pipe /strip in pipe technology filled with anti-corrosive conductive compound (CPRI tested) Below the ground inl50-200 mm dia earth pit and surrounding filled with required mineral filling compound (MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C finished chamber covered with hinge type with locking arrangement C.I cover C.I frame of size 200 mm x 200 mm complete testing of earth resistance as required of following sizes with pipe in pipe technology (inner pipe Dia/outer Pipe Dia) 80-100 micron G.I coating. G.I Pipe 2000 mm long.50/25mmTem1inal 12mm G.l strip. |
| 9 | Providing and lowering of 65 mm dia, 6 mtr length GI Pipe \"C\" (Heavy) class, ISI marked, both side threaded and welded with 15 mm thick MS flange, including rubber sheet/gasket, washer & nut bolts making groove etc. complete in all respect as required as direction of engineer in charge. |
| 10 | S/I/T/C of 20 HP capacity, three phase, 50 Hz, 440 V, Borewell submersible pump, for 150 mm dia bore heaving outlet pipe size 65 mm, 16 stage, discharge capacity 100- 200 LPM, head range 160-64 Mtr. Model - LSM -12 AF of Lubimake or equivalent to Texmo, Havells, KSB, Kirloskar CG make. |
| 11 | S/1/T/C of 15 HP capacity, three phase, 50 Hz, 440 V, Open well submersible pump, heaving inlet/ outlet pipe size 65 mm x 50 mm, discharge capacity 7.7 - 3.5 LPS, head range 52 - 76 Mtr Model - KOS-1575+ of Kirloskar make or equivalant to Texmo, Havells, KSB, CG,). |
| 12 | Providingand fixing of 65 mm dia non returen valveISI markedbody ring -Bronze on the existing pipe line i/c connection testing etc. as reqd. |
| 13 | Providing and fixing 150 mm dia pressure gauge of, 0-300 PSI or 0-14 kg per cm squire fitted with 12/15 mm dia. Pad cock valve, G.I. pipe elbow etc. complete i/c connection testing etc. as reqd. |
| 14 | S/F 10 mm dia, PVC coated safety steel rope complete withU clamp & bolt as per directions of engineer in charge as required. |
| 15 | Providing and fixing 6 SWG dia GI. wire on surface or in recess for loop earthing as required. ( rate After adding all factor) |
| 16 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.( rate After adding all factor)3.5X35 sq. mm (32mm) |
AI Tender Summary
Tender Timeline
Oct 04, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 16, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender