Tender For Maintenance Of Toilet At Ward 1 Kannarpatti Community Toilet In Kamuthi Town Panchayat., kamuthi-Tamil Nadu

Tender For Maintenance Of Toilet At Ward 1 Kannarpatti Community Toilet In Kamuthi Town Panchayat.; 1 PlainCement Concrete 1:4:8 mix (One Part of Cement, Four part ofFine Aggregate and Eight part of Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers(TNBP No.28). 2 Plastering with CM 1:5(One part of cement & five parts of sand) mix for 12mm thick including cost and conveyance of all materialsto work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:56&57 3 Finishing with top of roof with one course of machine pressed tiles of size 20cmx20cmx20cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with same water proofing compound mixed with cement motar ,red oxide, etc.complete complying with standard specification as directed by the departmental officers.- 10 m2TNBP No:44-I 4 Laying with first quality design ceramic tiles of all colours new ceramic tiles 305 x 305x 6mm tk for flooring and set in Cement Mortar 1:3 (one part of cement & three parts of sand)20mm thick and pointed with white cement including adding with suitable colouring pigments of match with the colour of tiles used and curing etc., complete.including cost and conveyance of all materials etc.and all labour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No.special 5 Supply and Fixing of U-PVC Shutter openable Door using GI Steel Reinforcement, Butt hinge,Aldrop lock and foam Sheet includingcost and conveyance of all labour and all meterial charges etc Complete as per standard specification. 6 Supplying and fixing M.S Grill to doors, special windows and ventilators etc inclusive of cost of MS grill including one primer coat of red oxide and fixing in position etc. including cost and conveyance of all materials and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers.(as per the schedule of rate)TNBP No:86 & 86-A 7 Painting the new walls two coats over one coat of priming with best weather proof Exterior Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by departmental officersComplete as per standard specification. 8 Painting with two coats of Approvedcolour of best quality synthetic enamel paint, painting over new iron work including cost and conveyance of all materials and all labour charges etc. complete as per Standard specification and as directed by the departmental officers. (New Iron Surface).TNBP No:66&66-A 9 Wiring with 2x1.5sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100v grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch and making good of the concealed portion with suitable colour for PVC concealed light point. SD 24ISI Make with Standard specification . 10 Wiring with 2x1.5sqmm (22 / 0.3) PVC insulated SC unscheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3mm thick Hylem sheet cover for 5 A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. SD 38. ISI Make with Standard specification . 11 Supply and run of 2 of 6 sq.mm (84 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains . SD 66 . ISI make with standard specification. 12 Supply and run of 2 of 6 sq.mm (84 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in 25mm diaGI pipe (Class ‘B’) bent at both ends with necessary angle iron up right and end supports. SD 71. ISI make with standard specification. 13 Supply and fixing of single box type 4’40 w fluorescent fitting complete with copper choke and condenser with TW Round on wall and withtube with PVC unsheathed leads from ten nauble to the netting. ISI Make with Standard specification .sd 88 14 Supply and fixing of 4’ x 40 watts single street light fitting etc., complete.ISI Make with Standard specification .sd 92 15 Supply and fixing of 16 Amps DPIC switch of 500 V with metal clad with fuse and netural TW Board with earth connection only. SD 142 ISI make with standard specification. 16 Supply and fixing of 16 A aerial fuse unit (500A) on suitable 100 x 100 mm TW concealed box with hylem sheet on the tapping pole with necessary clamps.SD 128 . ISI make with standard specification. 17 Supply and fixing Indian Type water closet including cost and conveyance charges to site etc complete. ISI make with standard specification. 18 Supply and Delivery1000 litre capacity PVC water tank including cost and conveyancecharges to site etc complete. ISI make with standard specification. 19 Supplying and fixing of white vitreous Wash basin of approved make including cost and conveyancecharges to site etc complete. ISI make with standard specification. 20 Supplying and fixing of Mirrorapproved make.including cost and conveyancecharges to site etc complete. ISI make with standard specification 21 Conduction Geocysical Survey with Scientific Instruments including transportation charges 22 Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site ( Site will be shown by the TWAD Board Officers) including construction of mud pit..( 23 Reaming from 150mm dia pilot bore to 300mm dia bore as directed by departmental officer upto 60m below ground level 24 Supply and delivery of unplasticised ribbed screen PVC casing pipe of the 140mm dia in 3m length with screwed and socket end and centering guide for every 15m length of pipes as per IS / 12818 / 92 and as amended from time to time to suit the borewell upto 80m depth (C.S) with ISI marking including, loading, unloading , freight, stacking and transit insurance charges etc, complete. 25 WD-M0028 150mm CM 26 WD-M0029 150mm RS 27 End Cap 28 Labour Charges for inserting PVC casing pipes of 150 mm OD PVC Casing Pipes Assemblyassembly (with slots or without slots) in the drilled hole including the jointing the pipes with PVC couplers with cement paste etc. complete 29 Charges for developing the Borewell with air compressor of 600 CFM capacity (Minimum 8 Hours) including transportation, labour and fuel charges for compressor as directed by TWAD Officers and conducting yield test by ‘V’ notch method. 30 Supply and Delivery of Panel board (DOL)for 3 HP submersible motor(Rate as per TWAD Board-2024-2025.) 31 Supply and Delivery of 3 H.P submersible motor 50 lpmX175m head -Three Phase Without Panel board(IS 8034)(,Rate as per TWAD Board-2024-2025.) 32 Supply and Delivery of Panel board (DOL)for 3 HP submersible motor(Rate as per TWAD Board-2024-2025.) 33 1.5 sq.mm PVC insulted copper flat cable 34 32mm UPVC Pipe 35 32mmUPVC union 36 MS Bore clamp set using MS flat 10 x 3 mm for 5 bore pipe 37 Nylon Rope 38 Errection for labours charges for 3 HP submersible motor and pump set etc., completed-TWAD SOR-2024-25(5 to 10HP). 39 Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangementsetc., completed ( SERVICE BOX) 40 Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains.(PWD standard data No.SD. 64). 41 Supply and run of 2x1 5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class ‘B’) suitably bent at bothends with necessary angle iron upright and end supports for mains(PWD standard data No.SD. 67). 42 Supply and fixing of 32A TPN metal clad switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing a No.SD. 148). 43 Dismantling the existing Old damaged Reinforced Cement Concrete including all labour charges etc complete.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	04-10-2025	Time change	Date	10-10-2025

Refer document

INR 6.70 Lakhs /-