Regarding Getting Approval From External Matters Listed In The Development Plan Of Swarajist Dharamveer Chhatrapati Sambhaji Maharajs Martyrdom Site Mauje Tulapur, Ta.Haveli And Samadhi Sthal Memorial Vadhu (Bu) Ta.Shirur District, Pune Development Plan., shirur-Maharashtra

Regarding getting approval from external matters listed in the development plan of Swarajist Dharamveer Chhatrapati Sambhaji Maharajs martyrdom site Mauje Tulapur, Ta.Haveli and Samadhi Sthal Memorial Vadhu (Bu) Ta.Shirur District, Pune Development Plan.- 1 Thermocol blocks(1mX1.2mX3m)-For preparation of1:1 scale statue by carvingparts on CNC & Robot.(1 block usedfor 1 sqm Surface Area.) 2 PU Adhesive-(Used as adhesive to join thermocol parts together to make 1: 1 Scale statue.)0.300Kg usedfor 1 sqm, 3 Lakhdana- Lakhdana is desolved in sprit to form french polish which is applied in the pop mould so that its form a thin coating which fills up the fine pores so that it does not absorb the fiber glass resing and gives the fine finish. It is also used to fix the graphite powder applied on the wax sculpture.(0.300 kg.for 1sqm with thermocol moulds) 4 Katha (coir) coconut fibers-Its used taking moulds with POP and coir on thermocol statue parts after completing details on clay.(1 bundle for 3 sqm) 5 Coarse Sand (Badarpur)-Badarpur is a coarse sand used in making moulds of wax sculpture along with pop.(30 cuft. required for 1 sqm mould making) 6 Silicon Rubber-It is applied to getting the mould on the thermocol statue.(16 kg used for taking mould of 1 Sqm) 7 Silicon Oil-it is applied to making thin silicon rubbe for getting mould on the thermocol statue.,(3 Ltr. Used to make thin of silicon) 8 Silicon Hardner-it is aplied to making thin silion rubber for getting mold on the thermocol statue.,(1/2 ltr used for 1 SQM) 9 Cotton White Roller Patti-it is applied to making thin silion rubber for getting mold on the thermocol statue.,(3 mtr used for 1 SQM) 10 Oil Putty-its help to getting mold of siliconon statue side,(1.5 kg used for 1 SQM) 11 Teflon Washer-its used to join structuralsteel frame with bronze cleats,(2 Washerfor 1 Cleats) 12 Imported micro wax, paraffin wax & bees Wax-Different waxes are mixed togetherto give a certainviscocity which is required to be applied after heating the wax to 80-100° cetigrade with a brush in to the pop mould to make the wax statue,(15 Kg for 1 sqm) 13 Spirit-Its form of raw alcohalusedto disolvelakhdana tomake a solution generally caldfrench polish which helps to block the pores to avoid absorbtion of resin and fiber glass.,(1/2 Ltr. Forfor 1 sqm for plaster of parismould and .) 14 Wax Polish-its used for coating on surface area of thermocol,(1 kg used 1 sqm area for coating on surface area of thermocol) 15 LPG Hippo (422 Kg each)-LPGto melt the bronze metal at 1100 degreerade& used to dewax the wax moulds in the furnace.,(BPCL) 16 Crucible (AC 355 R4) used to melt bronze-Cruicible is used to melt the bronze at 1100° centigrade,(1 crucible used for 5 tonnesbronze) 17 Bronze cleats for fixing bronze to steel structure-Bronze cleats are specially made parts in the form of a clamp used to attach the metal parts of the scuplture to the steel structure inside thestatue.,(1 cleats for 1 sqm partsweight of 1 cleat 500 gram.) 18 Borax-Borax is used as a cleaning agent during melting of bronze metal to remove impurities in the form of slag from the cruicible.,(1/2 Kg usedfor 1 sqm) 19 Argon gas-Argon gas is used to weld thebronze statue parts togeather.,(6 nos. for 1 sqm) 20 Co2 gas-Carbon dioxide gas is used to harden the Sodium Silicate and sand moulds.,(7 nos. for 1 sqm) 21 Brushes, (Steel & brass)-Steel and brass brushes are usedto remove thecarbon deposited on the bronze cast pieces after casting.,(0.65 Brush Per Sqm) 22 Sulphuric Acid, Hydrochloric acid-Sulphuric acid and Hydrochloric acid to clean the bronze metal surface.,(5Ltr. For 1 sqm wash) 23 Filler wire same composition as bronze metal- Filler Wire is used in Argon Gas welding to weld bronze cast parts.,(10 kg for 1 sqmwelding) 24 CNC Machine charges for Thermocol Cutting, Joining and finishing (6.5 hrs. operatedfor 1 sqm) 25 Scaffolding (for periphery of 17M+17M+17m+17m)and Height 30m

INR 590 /-

Refer document