Tender For Work Of Installing 06 Nos. Of High Masts For Proper Lighting At Inner Ring Road Phase 2 Toll Plaza. - Supply & Fixing Of 30Mtr High Mast Shaft Of Approved Make With Rising System Hot Dip Glavanized Inside & Out Side Dip, Heaving Pole Sheet Thic, agra-Uttar Pradesh

Tender For Work Of Installing 06 Nos. Of High Masts For Proper Lighting At Inner Ring Road Phase 2 Toll Plaza. - Supply & fixing of 30mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip, heaving pole sheet thickness 4 mm. Top dia minium 150 mm, Bottom dia 500 mmbase plate 32 mm thick suitable for wind velocity as per IS 875 part 3 &having no circumferential weld, with accessories for high mast such as head frame suitable for 16 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc complete in all respect. 2 Supply and fixing offactory wired integral LED flood light luminaires with die cast aluminium housing and lenses built with mandatory driver set suitable for 350 Watt. Confirming to IP 65/66 protection complete in all respect including labour. CAT- AAA. (Tango LED - Double Decker or equivalent (Philips / Crompton / Bajaj).18700-22000 system lumens high power LED with lenses, > 110lm/W, PF>0.95, THD<10% at full load, CRI>70, potted driver set (Not circuitory), phase to phase protection at 440 V & > 300V auto cut and re-start feature, with 5 year warrantee. 3 Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E./Ic., complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 70 sq. mm 3-1/2 core. 4 25 sq. mm 3-1/2 core. 5 Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the E./Ic.70 sq. mm. 6 50 sq. mm. 7 25 sq. mm. 8 Supply and fixing of 400 A, 415 V outdoor MSP with fuse base all complete as per direction of E./Ic. 9 Supply and Wiring of submains with two nos. of 2.5 sq. mm. FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T & P required for proper completion of the work as directed at site by Engineer in charge. 10 Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing.Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. 11 Supplying and laying of 90 mm dia. (OD-90 mm & ID-76 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 12 80 mm to 150 mm dia. size. HDD Drilling for 11 KV HT cable / LT cable all complete with labour T&P requried for proper complition of the work. 13 Supply and erection of 100 Amp. TPN tap offbox on risingmains complete with HRC fuses etc. complete in all respect. 14 Supply and fixing of 40 Amp. TPN of of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.

INR 1770 /-

Refer document