Tender For Repairs To Pcc Kota Stone Ceramic Vitrified, Granite Floors External Wall Tiles And Acp Paneling And Steel Gates Guard Rails Railing And Steel Structure At Certain Otm Areas Under Age B R 1 At Ins Shivaji Lonavla; 1 Dismantling floor, hearth or wall tiling including cementmortar beddingremoving serviceable tiles and rubbish off the premises etcand removal of rubbish/ demolished materials out of MD landcomplete all as specified and directed by Engineer-in-Charge . 2 M&L for vertified ceramic tiles 10mm(HD POLISH) (light shade of square/ rectangular) polished,area of each tiles exc 0.06 Sqm and not exc 0.75 sqmin floors etc,.set and jointed in non skid adhesive(IS-15477:2004 TYPE-II and IS-4577:2019-TYPE-I T specification for adhesive and pointed in white or coloured to match including 15mm thick screed bed in CM 1:6 laying floor finished complete all as specified and directed by Engineer-in-Charge. 3 M&L for vertified ceramic tiles 10mm(HD MATT) (light shade of square/ rectangular) polished,area of each tiles exc 0.06Sqm and not exc 0.75 sqmin walls skirting etc,.set and jointed in non skid adhesive e(IS-15477:2004 TYPE-II and IS-4577:2019-TYPE-I T specification for adhesive and pointed in white or coloured to match including over 10mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as in backing coat for tiles.complete all as specified and directed by Engineer-in-Charge. 4 S&F Non Skid (coloured) ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in in non skid adhesive e(IS-15477:2004 TYPE-II and IS-4577:2019-TYPE-I T specification for adhesivewhite or coloured cement over & including 15 mm thick screed bed in cement mortar (1:6)complete all as specifed and as directed by Engineer-in-Charge. 5 S&F glazed ceramic (coloured) tiles (300mmx 450mmx7 mm) in vertical surfaces such as skirting dados and risers of steps etc set and jointed in neat cement slurry and pointed in white or coloured cement. Including cutting the tiles to the required size wherever required including motering the corners etc over & including 10 mm thick backing coat of cement plaster in CM (1:4) complete all as specified and directed by Engineer-in-Charge. 6 S&F Digital wall tiles Satin Matt Finish (coloured) tiles (300mmx 600mmx8.5 mm) in vertical surfaces such as walls,skirting,dados and risers of steps etc set and jointed in neat cement slurry and pointed in white or coloured cement. Including cutting the tiles to the required size wherever required including motering the corners etc over & including 15 mm thick backing coat of cement plaster in CM (1:4) and using elevation tile adhesive Ezy Fix SEF 777 complete all as specified and directed by Engineer-in-Charge.NOTE:Unit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works. 7 Dismantling stone slabs and tiles of any description or thickness in kitchen platform and similar work laid, bedded and pointed in cement mortar complete all as specified and directed by Engineer-in-Charge. 8 M&L for machine cut granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like laid over & including15mm thick Screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of slab complete all as specified and as directed by Engineer-in-Charge. 9 M&L for 20 to 25mm thick machine cut and machine polished cudappa stone slab for kitchen plateform jointed and set in CM 1:3 and Over a screed bed of 15mm of 1:3 fixed including rounding to edge of stone slabs one side edgeetc complete all as specified and as directed by Engineer-in-Charge 10 M&L For Machine cut kota stone slab flooring 20-25mm thick over cementscreed base Of 15mm of 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete 11 Taking down cement or cement lime plaster on brick masonary or concrete surface in wall and ceiling etc including raking out joints, hacking for keys, scrubbing down with water etc and removing rubbish outside MD land etc complete all as specified and directed by Engineer-in-Charge. 12 M/L for rendering 10 mm thick in CM 1:6 on brick walls finishing with sagoleven and smooth (with out using extra cement)etc complete all as specified and directed by Engineer-in-Charge. 13 M & L for rendering 5 mm thick in CM 1:3 on concrete surfaces as in ceiling and finishing the surface even and smooth with sagol including taking down and removing debris outside MD land etc complete all as specified and directed by Engineer-in-Charge. 14 Demolition of Concrete of any description and in any position not otherwise specifically provided for cement Concrete(unreinforced) 15 M & L for hardcore of gauge n exc 63 deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface 16 M & L for cement concrete type D-2 1:4:8 (40mm graded aggregate) 75mm tk as in subbase. 17 Dismantling wall and ceiling boards(fibre,pulp, unsulation etc) or unsulation board/slab/beam kob, any thickness including cover gillet complete all as specified and directed by Engineer-in-Charge 18 S&FArm Gyp-FB ceiling snow Frost vinyl face, washable metallized polyester foil backing ,vinyl covered edges, suspended ceiling on suspension system. Panels shall be of Size 600 mm x 600 mm x 9 mm, having 7 kg/SQM,including providing Grid system for fixing ceiling tiles shall comprise of suspension system with true horizontal level, suspended on inter locking tegular “Select” system with 15mm black flanges incorporating a 4mm central reveal in black colour and a load carrying capacity of minimum 14.50 kg/m2 with birdsmouth notches metal grid of hot dipped galvanized steel sections consisting of main T runner with suitably spaced joints to get required length and of size 15x32 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 15mmx25mm made of 0.30 mm thick (minimum) sheet, 1200mm long spaced between main T at 600 mm center to center to form a grid of 1200mmx600 mm and secondary cross T of length 600 mm and size 15mmx25mm made of 0.30 m thick (minimum) sheet to be interlocked at middle of the 1200mmx600 mm panel to form grids of 600mmx600mm and wall angle of size 20mmx15mmx0.3 mm and laying false ceiling tiles of approved texture in the grid including, required fitting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85mm x 30mm x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 15 mm of all T-sections all complete for all heights as per specifications, drawings incl dismantling of old ceiling, all as specified and directed by Engineer-in-Charge. 19 S&F 40mm thick Solid PVC Sandwich Panel with 1 mm Plain PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing complete all as specified and as directed by Engineer-in-Charge. 20 M&L for PCC 1:2:4type B0 (12.5mm graded agg) as in roof kerbs coving over chajjas and similar locations rounded or chamfered on edges. 21 S&F Rolled mild steel section as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc quality conforming to Fe 410-W (Gde E250) quality-A. 22 Preparing newsteel Surfaces of any description, over 10cm in width or grith, not otherwise described and applying two coats of Epoxy paint over a coat of Epoxy Primer 23 S&F in repairs vitreous china wash basin, white, flat back, size 580mm X 450mm including CI brackets, 32mm dia brass chromium plated waste fittingswith long screwed shanks and fly nuts flanged end bedded in red lead cement and other end fixed with & including cutting for & pinning in end of brackets and 15mm bore pillar tap, cast copper alloy fancy type chromium plated, screwed down high pressure complete all as specified and as directed by Engineer-in-Charge. 24 Dismantling wrought iron or mild steel work of any description not otherwise provided for 25 S&F Framed work as in doors Window Grill, Grating, ladder ,Hand rail, or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.Fe 410 W(Gde)-E-250 Quality-A Complete all as Specified and directed by Engineer-in-Charge 26 S&F in repair aluminium powder coated (fancy type) tubular curtain rod, 20mm dia, complete all as specified and as directed by Engineer-in-Charge. 27 M&L preparation of old galvalume roof sheet surfaces of any descriplain and applying one coat of synthetic enamel paint all as specified and as directed by Engineer-in-Charge by Engineer-in-charge 28 M&L for preparation of new/old steel surfaces of any descriplain, over 10cm width or girth and applying two coat of anticorrosive epoxy paint over a coat of epoxy primer all as specified and as directed by Engineer-in-Charge. 29 S&F in repairs steel rolling shutters thickness of laths in 1mm, without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete push pull or manual type 30 S&F in repairs steel rolling shutters thickness of laths in 1mm, without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete gear operated type with bevel gear box and crank handle 31 S&F Ball bearing for rolling shutters 32 S&F safety lever locks mild steel with 4 levers for rolling shutters 33 Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, Steel letter ,Steel pole ,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including Holes for nails or screws, hand punched through iron or mild steelfixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified by Engineer-in-charge.
