|
| 1 | Cost for the supply of pipe G.I. 6 inch dia confirming to IS 1239 Part I plain ends and length of 6 mtrs approximately with IUSI mark Class ‘C’, wall thickness 5.4mm. |
| 2 | Cost for the supply of 6 inch dia ‘C’ Class G.I. long bend 90 degree, confirming to IS 1239 Part 1 |
| 3 | Cost for the supply of 6 inch ‘C’ Class G.I. short bend confirming to IS 1239 Part 1 |
| 4 | Cost for the supply of 6 inch dia ‘C’ Class G.I. Tee 6”x6”x6”, confirming to IS 1239 Part 1 |
| 5 | Cost for the supply of 6 inch dia MS flange with necessary G.I. bolts, nuts and washers |
| 6 | Cost for the supply of 6 inch dia MS flange Dummy |
| 7 | Cost for the supply of Cast steel sluice / Gate valve size 6 inch dia. Flanged end, PN 10 |
| 8 | Cost for the supply of 6 inch dia butterfly valve (Body – Ductile Iron, Internal material – Stainless Steel, Seal Elastomer – EPDM) ISI mark |
| 9 | Cost for the supply of full flow type,Water Meter -size 6”, internal (turbine type), dry dial horizontal pattern with ISI mark, conforming to IS -2373 with flanged ends drilled and faced pattern, read in litres, direct dry dial type,non-magnetic type, material Cast iron. |
| 10 | Cost for the supply of 6\"x 4\" concentricReducer Coupling GI ‘C’ class , confirming to IS 1239 Part 1. |
| 11 | Cost for the supply of pipe G.I. 4 inch dia confirming to IS 1239 part 1 plain endsand length of 6 mtrs approximately with ISI mark class ‘C’, wall thickness 5.4 mm |
| 12 | Cost for the supply of 4 inch dia ‘C’ class G.I. long bend 90 Degree confirming to IS 1239 part 1. |
| 13 | Cost for the supply of 4 inch dia ‘C’ class G.I. short bend confirming to IS 1239 Part 1) |
| 14 | Cost for the supply of 4 inch dia‘C’ class G.I.Tee 4”x4”x4” confirming to IS 1239 part 1 with flange end. |
| 15 | Cost for the supply ofMS Flange suitable for 4 inch dia GI pipe with necessarybolts, nuts and washers |
| 16 | Cost for the supply of 4 inch diaMS Flange Dummy |
| 17 | Cost for the supply of Cast steel sluice/Gate valvesize 4 inch dia flanged end, PN 10 |
| 18 | Cost for the supply of 4 inch diaButterfly valve (Body – Ductile Iron, Internal material - Stainless Steel, Seal Elastomer - EPDM) ISI mark |
| 19 | Cost for the supply of 4\"x 2\" concentricReducer Coupling GI ‘C’ class , confirming to IS 1239 part 1 |
| 20 | Cost for the supply of 2 inch dia MS flange Dummy |
| 21 | Cost for the supply of Insertion Indian rubber (3mm thickness & 3 feet width) |
| 22 | Cost for the supply of HT bolt and nut with plain washer size M 16 x 150 mm, 2.00mm pitch, 8.8 grade full thread |
| 23 | Cost for the supply of RCC Hume pipe 12\" dia |
| 24 | Charges for earth excavation work of Size 1 m x 1 m x 1 m and relaying to original shape |
| 25 | Charges forcutting of concrete road of Size 1 m x 1 m x 1 m and relaying to original shape |
| 26 | Charges for removal of Concrete slab and refixing |
| 27 | Charges for fabrication and installation of GI water pipe lines of size 6\" Dia. and 4\" Dia. as per drawing |
| 28 | Charges for the painting-one coat red oxide primer and two coats sky blue enamel paint for 6\" and 4\" dia pipes for the above said quantities |
| 29 | Charges for Supply, Fabrication, Fixing of steel Pedestals on concrete slabs with anchor bolts and suitable clamps to be provided on the pipeline as per ChPA Drawing. Material M.S.Angle 75 X 75 X 8 mm |
| 30 | Charges for the painting-one coat red oxide primer and two coats sky blue enamel paint in steel pedestals |
| 31 | Charges for construction and fixing of concrete pedestal as per Ch.PA Drawing (A) |
| 32 | Charges for construction and fixing of concrete pedestal as per Ch.PA Drawing (B) |
| 33 | (B) LESS: Charges for buy back (includes removing and taking out the materials) of existing old 4\" dia. PVC and G.I. water pipeline.A) PVC pipe -350mB) G.I.Pipe-1650mNote: The ‘L1’ bidder/successful bidder has to agree to match with the highest quote among the participated bidders for buyback charges/value. |
