Tender For Special Repair And Maintenance Of Service Gate, Emergency Gate Of Lower Rajghat Canal (Lrc) At Rajghat Dam.; 1 Part A 2 Opening of 2no service gate lift on top crust of service gate and cleaning, scraping guide surface and old and damaged part as roller, rubber seal jammed bolt nut and after fitting of new roller rubber seal wire rope pulley and other required work including cost of D.G. sat, oxygen and D.A. gas cylinder welding plant electrod by trained mechanical person and hiring of pickup van for material and t7p and halting at site from jhansi workshop to RAJGHAT DAM one gate opening and fittings approx 4 days =16800x4 = 67200 per job (as per sanction rate of SE, IV circle, Jhansi vide letter no. 1014 Dt 13.02.2019) excluding of GSTservice gate. 3 Providing and making casting C.I. roller including cost of casting, turning, boring and collar making as required.(220x220x25)/4000000x115=34.78x 8no.for one gate (as per sanction rate of SE, IV circle, Jhansi vide letter no. 1014 Dt 13.02.2019) excluding of GST.service gate 4 Providing, casting and making G.M. bush for roller including cost of casting, turning, bearing and collar making as required.(Dia 60x60x25)/4000000x115=2.58x8 no.for one gate (as per sanction rate of SE, IV circle, Jhansi vide letter no. 1014 Dt 13.02.2019) excluding of GST.service gate 5 Providing, casting and making S.S. pin for roller including cost of turning and collar making as required.(dia 60x60x25)/4000000x130=2.92x8no. (as per sanction rate of SE, IV circle, Jhansi vide letter no. 1014 Dt 13.02.2019) excluding of GST service gate 6 Providing,casting and making guide shoe including, turning, boaring sharpening, drilling as required.1 no. 20.00 kg.x4 no.=80.00 kgs.(as per sanction rate of SE, IV circle, Jhansi vide letter no. 1014 Dt 13.02.2019) excluding of GST.service gate 7 Providing of rubber seal including cost of seal flate and countre sunk screw as required.(1800x2=3.60)+(2100x2=4.20)= 7.80 mtr.(as per sanction rate of SE, IV circle, Jhansi vide letter no. 1014 Dt 13.02.2019) excluding of GST.service gate 8 Providing of bolt nut and washer off size. (as per sanction rate of SE, IV circle, Jhansi vide letter no. 1014 Dt 13.02.2019) excluding of GST.service gate 9 Providing, casting and making C.I. wire rope pulley including cost of casting, boring, groove cutting as required.(275x275x25)/4000000x100=47.26x3no.(as per sanction rate of SE, IV circle, Jhansi vide letter no. 1014 Dt 13.02.2019) excluding of GSTservice gate. 10 Providing, casting and making G.M. bush for wire rope pulley 60x60x25/4000000x100 =2.25 kg 3no.(as per sanction rate of SE, IV circle, Jhansi vide letter no. 1014 Dt 13.02.2019) excluding of GST.service gate 11 Providing and making S.S. pin for pulley finished 60x60x25/4000000x1.30=2.925 kg x 3no. 1.56mtr(as per sanction rate of SE, IV circle, Jhansi vide letter no. 1014 Dt 13.02.2019) excluding of GST.service gate 12 Hiring of water diver with underwater instruments, opening of old and damaged/jammed gates, lifting of top crust proper work. as per market rate.service gate 13 Opening of 2no slauce gate lift on top crust of service gate and cleaning, scraping guide surface and old and damaged part as roller, rubber seal jammed bolt nut and after fitting of new roller rubber seal wire rope pulley and other required work including cost of D.G. sat, oxygen and D.A. gas cylinder welding plant electrod by trained mechanical person and hiring of pickup van for material and t&p and halting at site from jhansi workshop to RAJGHAT DAM one gate opening and fittings approx 4 days =16800x4 = 67200 per job(as per sanction rate of SE, IV circle, Jhansi vide letter no. 1014 Dt 13.02.2019)of Emergency gate excluding of GST. 14 Providing and making casting C.I. roller including cost of casting, turning, boring and collar making as required.(220x220x25)/4000000/115=34.78x8 no.(as per sanction rate of SE, IV circle, Jhansi vide letter no. 1014 Dt 13.02.2019) excluding of GST. 15 Providing, casting and making G.M. bush for rollar including cost of casting, turning, bearing and collar making as required. (Dia 60x60x25)/4000000x115=2.59x8no. (as per sanction rate of SE, IV circle, Jhansi vide letter no. 1014 Dt 13.02.2019) excluding of GST. 16 Providing, casting and making S.S. pin for roller including cost of turning and collar making as required.(dia 60x60x25)/4000000x130=2.92x8no. (as per sanction rate of SE, IV circle, Jhansi vide letter no. 1014 Dt 13.02.2019)of Emergency gate excluding of GST. 17 Providing, casting and making guide shoe including,turning, boaring, sharpening, drilling as required. 1no.20kgx4no.=80.00x2no.for one gate . (as per sanction rate of SE, IV circle, Jhansi vide letter no. 1014 Dt 13.02.2019) of Emergency gate excluding of GST. 18 Providing of rubber seal including cost of seal flate and countre sunk screw as required. (1800x2=3.60)+(2100x2=4.200)= 7.80 mtr.(as per sanction rate of SE, IV circle, Jhansi vide letter no. 1014 Dt 13.02.2019)of Emergency gate excluding of GST 19 Head stock worm and wheel type complete set suitable for 63mm dia model ww-90 two ton capacity wt approximate 322 kg each(as per sanction rate of SE, IV circle, Jhansi vide letter no. 1014 Dt 13.02.2019) of Emergency gate excluding of GST 20 Providing of screw shaft 63mm dia including cost of turning, threading and seal making 4 mtr long.h(as per sanction rate of SE, IV circle, Jhansi vide letter no. 1014 Dt 13.02.2019)of Emergency gate excluding of GST 21 Providing, casting and making G.M. nut for shaft 63 mm dia including cost of casting, turning, boring threading and collar making.of Emergency gate 22 Providing of bolt nut and washer off size.of Emergency gate 23 Hiring of water diver with underwater instruments, opening of old and damaged/jammed gates, lifting of top crust proper work. as per market rate.of Emergency gate 24 Painting on old rusted steel surface of gates and appurtenances after prepearation of surface properly by sand blasting process and applying two coat of zinc rich primer and two coat solvent less epoxy paint including cost of all material labour T&P and scaffolding required for proper completion of work . as per IDUP Mechanical SOR 22.1@1232.00 per sqm.(including gst rate = 1232+221.76=1453.76)
