Tender For Hand Pump And Tube Well Construction Work For The Financial Year 2025-26 - 125 Mm Dia Nominal Bore. Phed Bsritem No. - 2.5.1 3 150 Mm Dia Nominal Bore. Phed Bsritem No. - 2.5.2 4 200 Mm Dia Nominal Bore. Phed Bsritem No. - 2.5.3 5 125 Mm , nainwa-Rajasthan

Tender For Hand Pump And Tube Well Construction Work For The Financial Year 2025-26 - 125 mm dia nominal bore. PHED BSRItem No. - 2.5.1 3 150 mm dia nominal bore. PHED BSRItem No. - 2.5.2 4 200 mm dia nominal bore. PHED BSRItem No. - 2.5.3 5 125 mm dia nominal bore. PHED BSRItem No. -2.45.2 6 150 mm dia nominal bore. PHED BSRItem No. -2.4.1 7 200 mm dia nominal bore. PHED BSRItem No. -2.4.2 8 125 mm dia NB( Thickness of pipe 4.8 mm & mass of tube 16.40 Kg/m) {IS:1239(Part-1:2004)} PHED BSRItem no. - 2.47.2 9 150 mm dia NB(Thickness of pipe 5.0 mm & mass of tube 20.13 Kg/m) PHED BSRItem no. - 2.11.1 10 200 mm dia NB (Thickness of pipe 5.4mm & mass of tube 28.46 Kg/m) PHED BSRItem no. - 2.11.2 11 Deepening of existing tube well by DTH system beyond existing depth up to 100 mtr. and above in all type of rocks including flushing of tube well and obtaining sand free water.Nominal bore 150 mm dia. PHED BSR 2023 Item no. - 2.7.1 12 Providing & Fixing of HDPE pipe Confirming to IS:4984:2021for water supply suitable for submersible & jet pump with required fittings ie socket, elbows, tee etc. complete in all respect. 40 mm OD 6 kg/cm2. E-pwd bsr 2022 Item no. - E21.4.1.1 13 125 mm dia 2.23.1 14 150mm dia 2.23.2 15 200 mm dia 2.23.3 16 Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set.PHED BSR 2023Item no. - 2.22 17 Labour charges for installation of submersible motor pump set including lowering/ delowering of pipes, cables, accessories etc. in tube-well/ open well complete including T&P, transportation of tripod, chain pulley block & any other material required for this purpose complete in all respect. Lowering onlyE-pwd bsr 2022 Item no. - E21.1.1 18 SITC of Radial / mixed flow ISI marked water and anti-corrosive liquid filled submersible motor pump setssuitable for 100/150mm dia borewell.The size of adopter fixed on top of the motor should exceed the top of coupler , for safegaurd the coupler. The construction material of motor and pump should match IS: 8034 : 2018 and IS: 9283 guideline. The radial flow pumpset should operate at 5 star energy efficiency level of BEE and mixed flow pump set should operate at 3 star energy level of BEE, accompained by valid BEE certificate. Motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008,& IS12615:2011with required accessories including making connection suitable for Bore well. The job includes labour part of lowering ofriser pipe G.I./H.D.P.E. with rope, cables & pump, installation of complete fitting and accessories, jointing of electrical cables up to Starter. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect. OEM shall have submitNABL / CPRI / ERDA accrediatedlab type test certificate before execution. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . E-pwd bsr 2022 Item no. - E21.6.1.2 19 SITC of ContactorOEM Fabricated DOL/Star-Delta Starter panel with switchgear selection as per Type-2 Cordinatiom Chart andmade out from 1.6 mm thick powder coated CRCA sheet, enclosure comprising of over load protection relay, short circuit & single phasing protection, Illuminated ON / OFFpush buttons,ammeter, voltmeter, indicating lamps etc.suitable for following rating motors complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR .(Refer Electrical BSR)0.5-1.5HP 1-phase.E-pwd bsr 2022 Item no. - E21.13.1.1 20 Supply & Fixing of ISI marked three core PVC flat submersible cableas per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980including making connection etc. 4.0 Sq.mm 3 core flat/ Round PHED BSR 2023Item no. - 2.19.1 21 Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-ArrmouredAluminiumcable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV withH4- Grade electrolyticaluminium conductor confirming to IS 8130 of purity >99.6 %,Inner / outer sheath confirming to IS:5831in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) includingtesting etc. as required of following size 4.0 Sq. mm 2 core E-PWD BSR2022Item no. - E11.1.1.1 22 Providing & Laying of Polypropylene rope Confirming to IS:5175 for submersible pump of following sizes. complete in all respect. 12mm (suitable up to 50 mm OD pipe)E-PWD BSR2022Item no. - E21.3.1 23 Supply and installation of ISI marked India Mark II Hand pump set complete with cylinder & 15 connecting rods. PHED BSR 2023 Item no.2.51 24 Supply & installation of GI pipe 32 mm medium class “B” with pipe sockets (heavy duty).PHED BSR2023Item no. - 2.50 25 Construction of 185 cm. dia platform as per approved design & drawing of UNICEF. PHED BSR 2023 Item no. - 2.55 26 Installation of India Mark II/III E.D. I & II hand pump set complete on existing platform.PHED BSR 2023 Item no. - 2.54 27 Supply and installation of ISI mark connecting rod as per departmental specifications. of3 meter length.PHED BSR 2023 Item no. - 2.53

INR 1000 /-

INR 80 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB