Tender For Repair Work Of 64 Residential Building At Unit Headquarter Mbc Kherwara Distt., Udaipurbased On Pwd Integratedbsr 2022 - Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 1: 3: 6 or richer mix. 2 Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead: Of area exceeding 3 square meter. 3 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. 4 Dismantling GI pipes (external work) including excavation and refilling trenches after taking out the pipes and including stacking of pipes within 50 meter lead: 15mm to 40mm nominal bore. 5 Labour charges for removing W.C. pan (any type) of all sizes with care including all necessary fittings P or S trap. 6 Removing dry or oil bound distemper by scrapping sand papering and preparing surface smooth including necessary repairs to scratches by sandla/loi and all scaffolding (for colour changing only) 7 Dismantling tile work in floor and roofs laid in cementmortar including stacking of serviceable material anddisposal of unserviceable material within 50 mtr lead 8 For thickness of tiles 10mm to 25 mm 9 Carriage of Building Rubbish Stone metal (Grit and ballast etc.) for 5km 10 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3-fine sand) 11 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) 12 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :25 mm thick 13 Grading roof for water proofing treatment with water proffing compoundCement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) 14 Making khurras 450 x 450mm with average minimum thickness 50mm cement concrete 1 : 2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40micron finished with 12mm cement plaster 1 : 3 and one coat of neat cement, rounding edges andmaking and finishing the out let complete. 15 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 stone aggregate 10mm and down gauge)including finishing with cement mortar 1:3 (1 cement : 3 finesand) as per standard design : 16 75mm x 75mm 17 Providing and fixing external grade board solid core singleleaf flush door shutters ISI 2202-67 marked using Phenolformal dehyderesin in glue both sides with approved steelfittings complete as per annexure 18 35 mm thick . Commercial Veneer both side 19 Extra for providing external lipping with 2nd class teak woodbattens 6 mm minimum depth on all edges of shutters (over all areaof door shutter to be measured) Over item no. 8.13. 20 Repair of existing steel glazed doors, windows and ventilator,MS sheet door, garge doors, compound wall gates etc. bywelding drilling complete include. Cost of welding rods andhire charge of welding meachine and TP etc complete 21 Labour charges for repair to door / window without using anymaterial such as applying randha (finishing) tightening of bolts& screw etc. 22 Renewing glass panes, with putty and nails wherever necessary 23 4 mm thick plain glass panes 24 Repair of door, window shutters including cost ofmaterial and labour for change of damaged : 25 (c) Aldrop of mild Steel 26 (i) 12 long x12mm dia 27 (ii) 8 long x 10mm dia 28 (d) Stopper of Aluminium with 29 (ii) Double Rubber Gutka 30 (g) Mild Steel Tower Bolt 6 long 31 (i) Steel Handle 6 size 32 Providing and fixing steel glazed doors windows andventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm.long embedded in cement concrete block 15x10x10cm. of1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate20mm nominal size) or with wooden plugs and screws or rawlplugs and screws with fixing clips or with bolts and nuts asrequired including providing and fixing of plain glass panes4mm thick with cooper glazing clips and special metal sashputty of approved make or metal beading with screwscomplete including priming coat of approval steel primer,excluding the cost of metal beading and other fitting exceptnecessary hinges of pivots steel handles peg stay etc. asrequired : 33 Partly fixed and partly openable (fixed area not to exceed 33%). 34 Supplying and fixing fixed wire gauge of 14 mesh x 24 gaugeto the metal frame of rolled section by metal beading 20x3mmwith suitable screw at not exceeding 150mm distance. 35 Providing and fixing Square bars or other flat welded towindow, ventilatiors etc. 36 Crazy marble stone flooring 20mm thick marble stone withblack or of specified colour topping including filling the gapswith cement marble chips mix in proportion of 4 : 7 (4cement: 7 white black or white or black marble chips) size from 1mmto 4mm by volume and under layer of 25mm thick cementconcrete [1:2:4, graded stone aggregate 12.5mm nominal size]rubbing and polishing and cement slurry etc. complete :In ordinary cement. 37 Providing and fixing 1st quality standard white, grey, ivory,fume red brown, light green, light blue and other light shadesglazed tiles confirming to IS : 13753 & IS :15622 of size200mm x 300mm in walls, floors, steps, pillars etc. laid on abed of neat cement slurry finished with flush pointing in thewhite cement mixed with pigment to match the shade of thetile complete (excluding the cost of cement plaster on wallsand pillar). 38 Add extra over item for marble printed, granite shade tiles 39 Providing and fixing 1st quality MAT finished ceremic tilesize 300x300mm confirming to IS : 13755 and IS : 15622colour such as white, grey, ivory, fume red brown, light green,light blue and other light shades in floors, steps, pillars etc.laid on a bed of neat cement slurry finished with flush pointingin the white cement mixed with pigment to match the shade ofthe tile complete (including the cost of cement mortar bed 40 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering -1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 41 Providing and laying water proofing treatment in sunken portion ofWCs bathroom etc. by applying polymer modified cementousslurry consisting of appearing: 42 (I) First layer of slurry of ement @ 0.448 kg/sqm mixed with polymer@ 0.253 kg/sqm This layer will be allowed to air cure for 4 hours. (II) Second layer of slurry of cement @ .242 kg/sqm mixed withpolymer @ 0.126 kg/sqm This layer will be be allowed to air curefor 4 hours followed by water curing for 48 hours.The rates includes preparation of surface treatment & sealing ofall joints corners, junction with polymer mixed slurry. Sqm. 117.00Note :- Rendering/plastering as protective layer if required will bepaid separately. 43 Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:2:4 light concrete using brick bats complete levelling and dressing the surface by50mm thick cement concrete 1:2:4 as per specification. 44 Providing and applying white cement based putty overplastered surface to prepare the surface even and smoothcomplete 45 New Plastered Surface (three or more coats) 46 Old Plastered Surface (two or more coats) 47 Distempering with oil bound washable distemper of approvedbrand and manufacture to give an even shade including allscaffolding 48 New work (two or more coats) over and includingscrapping and priming coat with cement primer. 49 Old work (one or more coats) including scrappingsurface and necessary repairs. 50 (b) Same colour 51 Painting exterior surface of Wall with 100% acrylic exteriorpaint of approved brand and manufacture to give an evenshade with two or more coats including prepartion of basewith sand papering, primer, putty, etc complete in all respectincluding scaffolding and safety provision 52 New Work 53 On old surface 54 Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade : 55 One or more coats on old work 56 Providing and fixing steel gate grating and grills made ofangles, tees, square bars or flats black pipe with holdfastand fittings complete as per deign and drawing includingcutting welding and fabrication with priming coat of red oxide. 57 Add extra of square rectangular hollow tubular section areused. 58 Repair to damaged RCC slabs, beams and columns etc forstrengthening with cement mortar 1 : 2 in following steps :-Sqm 1568.00(i) Choping losse and cracked concrete to required depth,cleaning the exposed surface of steel and concrete with wirebrush and sand papering , cleaning of concrete surface withwater as necessary and getting dried.(ii) Applying Epoxy primer on the exposed steel bars.(iii) Applying Epoxy hardener and resin mix (as permanufectureds specification) on concrete and steel bars withbrush.(iv) Speading dry cement mortar 1 : 2 mix over epoxy treated wetsurface and allow it to dry for one day.(v) Plastering the surface with cement sand mortar 1 : 3 uptodepth of 30mm complete.(vi) Cure the plastered surface for 15 days, All work includingscaffolding etc. complete in all respect. 59 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .)approved quality /make including joining the pipe withsolvent cement rubber ring and lubricant. 60 110mm dia 61 P&F rigid PVC pipe fittings (IS: 4985 mark) of approvedquality /make including joining the pipe with solvent cementrubber ring and lubricant: 62 Coupler (socket) 63 110 mm dia 64 Bend 87.5 65 110 mm dia 66 Pipe clip 67 110 mm dia 68 P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: 69 Size 580x440mm. 70 P & F waste coupling with fittings of approved quality / make : 71 C.P. Brass 40 mm dia 72 P & F C.P. brass Doom Waste Coupling 40 mm dia. 73 P & F extension pipe for bib cocks of approved quality/make 74 C.P. brass of heavy & superior quality 100 x 15 mm 75 Making connection of GI distribution branch with GI mainincluding all fitting. 76 Upto 25mm dia 77 P & F Pilllar Cocks (IS :8934 Mark) of superior quality andapproved make: 78 C.P. Pillar cock, 15 mm dia nominal bore 79 P & F Stop Cock (IS :8931 Mark), superior quality & ofapproved make: 80 (-do-) Concealed Stop Cock 15mm. 81 P & F PVC Storage Tank (IS : 12701 marked indicatingthe BIS license No), of approved make with cover, 25mmdia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipewith plug & socket, including making connection etc.,complete of approved design: 82 750 litres capacity. 83 1000 (-do-) 84 Add extra for Hoisting charges for each floor and Tripplelayered water tanks 85 For items 2.26.1 to 2.26.4 86 P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC ofapproved quality make : 87 Brass / Gun metal Half-turn wt. 1 Kg. of approved quality /make, 25mm nominal bore. 88 Supply & fixing G.I. Union ISI marked in G.I. pipe line asrequired complete in all respect of size : 89 15mm dia nominal bore 90 25mm dia nominal bore 91 P & F Full-way Valve (IS:778 Mark) or wheel valve ofapproved make : 92 Gun-metal 15mm nominal bore. 93 (-do-) 25mm nominal bore 94 P & F GI pipes ( Internal works ) with GI fittings excludingUnion (IS:1239 mark) and MS clamps, including cuttingand making good the wall and floors. 95 (a) Exposed on wall 96 15mm dia Nominal Bore 97 B Class 98 25mm dia Nominal Bore 99 B Class 100 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 101 15 mm nominal size 102 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge.(External work). 103 25 mm nominal size 104 Providing and Fixing Unplasticized Poly Vinyl Chloride(UPVC) SWR Pipes Type B for sciland waste dischargesystem (IS:13592 : 1992 Marked) of approved quality /make 105 75mm dia 106 110mm dia 107 Providing and Fixing Unplasticized Poly Vinyl Chloride(UPVC) SWR Pipes fittings type B for sciland waste dischargesystem (IS:13592 : 1992 Marked) of approved quality /make 108 Coupler 109 75mm dia 110 110mm dia 111 Bend 87.5 Dg. 112 75mm dia 113 110mm dia 114 Single Tee with Door 115 (i) 75mm dia 116 (ii) 110mm dia 117 Nahni Trap with Jali 4” 118 Vent Cowel 119 Pipe Clip 120 (i) 75mm dia 121 (ii) 110mm dia 122 P & F Bib Cock (IS : 8931 Mark), Superior quality ofapproved make: 123 C.P. Brass bib cock,15mm nominal bore. 124 (-do-) Long body, 15mm nominal bore weight not less than690 gm 125 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : Size 550 mm x 400 mm 126 Construction of chamber in all type of soil with 300 mm thickmasonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation,20mm thick insider plaster in Cm 1:6, finished with floatingneat cement, 50mm thick M-15 grade C.C. flooring ,earthwork etc. complete as per design including disposal ofsurplus earth within a lead of 50 mtr. 127 Inside size 300 X 300 mm depth upto 0.5 M Cement coverwith frame. 128 Construction of manhole in all type of soil inner size 90 X 60Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cementconcrete 1:5:10 in foundation, 20 mm thick inside plaster inCM 1:6, finished with floating neat cement, 50mm thick M-15grade C.C. flooring, making channels, 80mm thick stone slabcovering with 40mm thick M-15 grade C.C. flooring, Cementcover with frame of 450mm dia, earthwork etc. complete asper design including disposal of surplus earth within 50 mtr.lead. 129 Depth upto 0.50M 130 Providing & laying broken glazed titles on roof ( brokenglazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30Kg/Sqm. Of VG-10 (80/100) grade) and joints filled withcement mortar 1 :2 (1 cement:2 marble dust mixed with waterproofing compund all complete as per direction of Engineerin-charge.
