Tender For Estimate For 5 Km 11 Kv Line Conductor Aug. For Vidisha Road Feeder Under Ashoknagar D/C Under Ashoknagar Divisionestimate No. & Date :-21-513-120667-25-00068 Dt. 16-Sep-25, Stc No.:154 Dt. 19.09.2025,O&M No. :- 95298 Dt. 16.09.2025,Project No-, Ashoknagar-Madhya Pradesh

Tender For Estimate For 5 Km 11 Kv Line Conductor Aug. For Vidisha Road Feeder Under Ashoknagar D/C Under Ashoknagar Divisionestimate No. & Date :-21-513-120667-25-00068 Dt. 16-Sep-25, Stc No.:154 Dt. 19.09.2025,O&M No. :- 95298 Dt. 16.09.2025,Project No- 262402 - Provision- Estimate for 5 Km 11 KV Line Conductor Aug. for Vidisha Road Feeder 2 140 Kg.,8.0 Mtrs. long PCC pole 3 140 kg. 8.0 mtr. Long PCC Pole erection-[Including Pit Digging- Base padding of pole by Stone Block/Pre cost Block, pole erection, back filling/boulder, earthing coil] 4 11 KV Pin Insulator Polymer Composit (5 KN) 5 Labour for 11 KV Pin Insulator Polymer Composit (5 KN) 6 11 KV Strain hardware (T&C type) fittings 7 11 KV(45KN) Composite Polymer Disc Insulators 8 Labour for 11 KV(45KN) Composite Polymer Disc Insulators 9 AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) 10 Stringing of AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) 11 Aluminium Binding wire and tape 12 Aluminium paint 13 Labour for Aluminium paint 14 Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 15 Labour for Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 16 Back filling of poles with boulders. 17 Danger Boards Enamelled 11 KV 18 Labour for Danger Boards Enamelled 11 KV 19 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 20 G.I. WIRES 4.0 MM. (8 SWG) 21 Labour for G.I. WIRES 4.0 MM. (8 SWG) 22 Jointing Sleeves suitable for Raccoon (80Sq.mm.Al. Eq.) AAAC conductor 23 M.S.Nuts with Bolts 24 Red oxide paint 25 Labour for Red oxide paint 26 Stone Block/Pre cast block for base pedding(450X450X75MM) 27 11 KV V cross-arms angle type (65x65x6 mm angle) 28 Labour for 11 KV V cross-arms angle type (65x65x6 mm angle) 29 11 KV V-cross arm making Labour Charge 30 11 KV Top clamps angle type65x65x6 mm 31 Labour for 11 KV Top clamps angle type65x65x6 mm 32 11 KV Top clamp making Labour Charge 33 D.C. Cross-arms 8 ft centre to center (100x50x6mm)Channel 34 Labour for D.C. Cross-arms 8 ft centre to center (100x50x6mm)Channel 35 Hole Making Charges for 6/8 inch per Hole 36 Channel cutting Charges (Per Section Cutting) 37 Clamps for 140 kg PCC pole (50x6 mm Flat) 38 Back clamps (50x6 mm flat) for 140 kg PCC Pole 39 GST @ 18%

INR 590 /-

INR 2.20 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB