|
| 1 | 11 KV Composite Polymer AB Switch Horizontal Movement type |
| 2 | 11 KV control & relay panel with numerical static relay for double feeder protection |
| 3 | 11 KV Pin Insulator Polymer Composit (5 KN) |
| 4 | 11 KV Strain hardware (T&C type) fittings |
| 5 | 11 KV Top clamp 65X65X6 mm. angle type |
| 6 | 11 KV V cross arm 65X65X6 mm. angle type |
| 7 | 11 KV VCB, Outdoor Porcelain clad type with complete structure and accessories excluding CT & pannel |
| 8 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 9 | 11 KV.C.Ts.(Outdoor dry type) 200-100/5 Amps |
| 10 | AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) |
| 11 | Copper Control Cable 12 Core. 2.5 Sq.mm. (Unarmoured) |
| 12 | Copper Control Cable 2 Core. 2.5 Sq.mm. (Unarmoured) |
| 13 | Copper Control Cable 4 Core. 2.5 Sq.mm. (Unarmoured) |
| 14 | Copper Control Cable 8 Core. 2.5 Sq.mm. (Unarmoured) |
| 15 | D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel |
| 16 | H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-9 mtr. Long= 333.9 kg |
| 17 | M S Angle 65X65X6 mm |
| 18 | M S Channel 100X50x6 mm |
| 19 | WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long |
| 20 | 11 KV AL 59 ACS Covered Conductor 78.82 sq.mm along with MVCC accessories as per EN:50397 Calculated for 1 KM Single Phase Feeder, tension/dead/anchoring clamps with piercing connector suitable for MVCC, IPC for CC to CC connection,EN-50397 -P-2 |
| 21 | Additional Erection Charge |
| 22 | Aluminium paint |
| 23 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 24 | Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) |
| 25 | Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) |
| 26 | Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay |
| 27 | Concreting of structures & foundation (1:3:6) |
| 28 | Danger Boards Enamelled 11 KV |
| 29 | Dismentelling |
| 30 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 31 | Guarding for line/ Road crossing with 6 SWG GI wire & lacing of 8 SWG GI wire |
| 32 | Horizontal & Cross Bracing set of MS angle of 50X50X6 mm for 8 ft (2.4 mtr ) centre DP |
| 33 | M.S.Nuts with Bolts |
| 34 | Red oxide paint |
| 35 | Spiral winding sleeve suitable for covered conductor |
| 36 | STAY GI WIRE 7/4.00 MM.(7/8 SWG) |
| 37 | Stay set 20 mm. complete without Stay wire (Painted) |
| 38 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 39 | T CLAMP FOR 33KV & 11KV BUS, SUBSTATION upto DOG |
| 40 | Lebour Charge for Compny Side Material |
| 41 | Lebour Charge for Compny Side Material paide to Cont. % |
| 42 | SGST @ 9% |
| 43 | CGST @9% |
