Power Boards / Undertakings / PSU Closing in 0 days TDR #51557413

Tender For Estimate For Bifurcation Of 11 Kv Bedmau Pump Feeder Of Rannod D/C Under Onm Dn. Ii Shivpuri.(236155) (Nit-49) - Wpb160x160mm,30.44 Kg/Meter H Beam,13 Mtr Long 2 11 Kv Pin Insulator Polymer Composit (5 Kn) 3 11 Kv Strain Hardware (T&C Type)

Issued by Boards / Undertakings / PSU · rannod, Madhya Pradesh
Tender Value
8.41 Lakhs
Estimated cost
Bid Submission
07 Oct 2025
0 days left
EMD
25300
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
rannod → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Estimate For Bifurcation Of 11 Kv Bedmau Pump Feeder Of Rannod D/C Under Onm Dn. Ii Shivpuri.(236155) (Nit-49) - WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long 2 11 KV Pin Insulator Polymer Composit (5 KN) 3 11 KV Strain hardware (T&C type) fittings 4 11 KV(45KN) Composite Polymer Disc Insulators 5 200 Kg., 9 Mtrs. long PCC pole 6 AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) 7 M S Angle 65X65X6 mm 8 M S Channel 100X50x6 mm 9 11 KV AL 59 ACS Covered Conductor 78.82 sq.mm along with MVCC accessories as per EN:50397 Calculated for 1 KM Single Phase Feeder, tension/dead/anchoring clamps with piercing connector suitable for MVCC, IPC for CC to CC connection,EN-50397 -P-2 10 Aluminium paint 11 Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 12 Back Clamp for 280 Kg PCC Pole of MS Flat 65x8mm.(Each weight 1.92 Kg) 13 Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) 14 Back filling of poles with boulders. 15 Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) 16 Clamp 65X8 MM of MS Flat for pcc Pole 280Kg. (Each weight 3.04 kg ) 17 Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay 18 Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay 19 Concreting of structures & foundation (1:3:6) 20 Danger Boards Enamelled 11 KV 21 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 22 Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole 23 G.I. WIRES 4.0 MM. (8 SWG) 24 Guarding for line/ Road crossing with 6 SWG GI wire & lacing of 8 SWG GI wire 25 M.S.Angle 50x50x6 mm 26 M.S.Nuts with Bolts 27 Red oxide paint 28 Spiral winding sleeve suitable for covered conductor 29 STAY GI WIRE 7/4.00 MM.(7/8 SWG) 30 Stay Insulators 90X65mm 31 Stay set 20 mm. complete without Stay wire (Painted) 32 Stay set complete without Stay wire 16 mm. (Painted) 33 STAY WIRE 7/3.15 MM.(7/10 SWG) 34 Stone Block/Pre cast block for base pedding(450X450X75MM) 35 Lebour Charge for Compny Side Material

BOQ

Name of WorkEstimate for bifurcation of 11 KV Bedmau pump feeder of Rannod D/c under O&M Dn. II Shivpuri.(236155)
Sl. No. Item Description
1WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long
211 KV Pin Insulator Polymer Composit (5 KN)
311 KV Strain hardware (T&C type) fittings
411 KV(45KN) Composite Polymer Disc Insulators
5200 Kg., 9 Mtrs. long PCC pole
6AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.)
7M S Angle 65X65X6 mm
8M S Channel 100X50x6 mm
911 KV AL 59 ACS Covered Conductor 78.82 sq.mm along with MVCC accessories as per EN:50397 Calculated for 1 KM Single Phase Feeder, tension/dead/anchoring clamps with piercing connector suitable for MVCC, IPC for CC to CC connection,EN-50397 -P-2
10Aluminium paint
11Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG)
12Back Clamp for 280 Kg PCC Pole of MS Flat 65x8mm.(Each weight 1.92 Kg)
13Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg)
14Back filling of poles with boulders.
15Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg)
16Clamp 65X8 MM of MS Flat for pcc Pole 280Kg. (Each weight 3.04 kg )
17Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay
18Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay
19Concreting of structures & foundation (1:3:6)
20Danger Boards Enamelled 11 KV
21Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire
22Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole
23G.I. WIRES 4.0 MM. (8 SWG)
24Guarding for line/ Road crossing with 6 SWG GI wire & lacing of 8 SWG GI wire
25M.S.Angle 50x50x6 mm
26M.S.Nuts with Bolts
27Red oxide paint
28Spiral winding sleeve suitable for covered conductor
29STAY GI WIRE 7/4.00 MM.(7/8 SWG)
30Stay Insulators 90X65mm
31Stay set 20 mm. complete without Stay wire (Painted)
32Stay set complete without Stay wire 16 mm. (Painted)
33STAY WIRE 7/3.15 MM.(7/10 SWG)
34Stone Block/Pre cast block for base pedding(450X450X75MM)
35Lebour Charge for Compny Side Material
36Lebour Charge for Compny Side Material paide to Cont. %
37SGST @ 9%
38CGST @9%

AI Tender Summary

OUR REF NO 51557413
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 8.41 Lakhs
LAST DATE 07-10-2025
Authority
Authority Name Madhya Pradesh Madhya Kshetra Vidyut Vitaran Company Limited
Work Description Tender For Estimate For Bifurcation Of 11 Kv Bedmau Pump Feeder Of Rannod D/C Under Onm Dn. Ii Shivpuri.(236155) (Nit-49) - WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long 2 11 KV Pin Insulator Polymer Composit (5 KN) 3 11 KV Strain hardware (T&C type) fittings 4 11 KV(45KN) Composite Polymer Disc Insulators 5 200 Kg., 9 Mtrs. long PCC pole 6 AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) 7 M S Angle 65X65X6 mm 8 M S Channel 100X50x6 mm 9 11 KV AL 59 ACS Covered Conductor 78.82 sq.mm along with MVCC accessories as per EN:50397 Calculated for 1 KM Single Phase Feeder, tension/dead/anchoring clamps with piercing connector suitable for MVCC, IPC for CC to CC connection,EN-50397 -P-2 10 Aluminium paint 11 Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 12 Back Clamp for 280 Kg PCC Pole of MS Flat 65x8mm.(Each weight 1.92 Kg) 13 Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) 14 Back filling of poles with boulders. 15 Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) 16 Clamp 65X8 MM of MS Flat for pcc Pole 280Kg. (Each weight 3.04 kg ) 17 Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay 18 Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay 19 Concreting of structures & foundation (1:3:6) 20 Danger Boards Enamelled 11 KV 21 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 22 Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole 23 G.I. WIRES 4.0 MM. (8 SWG) 24 Guarding for line/ Road crossing with 6 SWG GI wire & lacing of 8 SWG GI wire 25 M.S.Angle 50x50x6 mm 26 M.S.Nuts with Bolts 27 Red oxide paint 28 Spiral winding sleeve suitable for covered conductor 29 STAY GI WIRE 7/4.00 MM.(7/8 SWG) 30 Stay Insulators 90X65mm 31 Stay set 20 mm. complete without Stay wire (Painted) 32 Stay set complete without Stay wire 16 mm. (Painted) 33 STAY WIRE 7/3.15 MM.(7/10 SWG) 34 Stone Block/Pre cast block for base pedding(450X450X75MM) 35 Lebour Charge for Compny Side Material
Basic Detail
Tender No DGM/SPR-2/Pic./2439 dt.30.09.25 (NIT-49)
Bidding Type Tender
Location
City rannod
State Madhya Pradesh
Key Dates
Publish Date 01 Oct 2025
Submission Date 07 Oct 2025
Open Date 08 Oct 2025
Finance
Tender Value 8.41 Lakhs
Tender Fee 1180
EMD 25300
Exemption Not Available
Document List
e954a680-72c1-4b05-a624-4e50e81d1565.html
BOQ_535841.xls
document.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 01, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 07, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Oct 08, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

e954a680-72c1-4b05-a624-4e50e81d1565.html

xls

BOQ_535841.xls

pdf

document.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders