Tender For Estimate For 11 Kv Interconnection Badodiya Agr Feeder Pachore S/S Under Gopalpur D/C Under Of (Oandm) Dn. Bhairunda - 140 Kg.,8.0 Mtrs. Long Pcc Pole 2 Wpb160x160mm,30.44 Kg/Meter H Beam,13 Mtr Long 3 Aaac Raccoon Conductor 0.075 Sq. Inc

Sharing tender

Tender For Estimate For 11 Kv Interconnection Badodiya Agr Feeder Pachore S/S Under Gopalpur D/C Under Of (Oandm) Dn. Bhairunda - 140 Kg.,8.0 Mtrs. long PCC pole 2 WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long 3 AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) 4 AAAC Dog conductor 0.10 sq. inch (100 sq.mm. Al.Eq.) 5 M S Channel 100X50x6 mm 6 M.S.Angle 50x50x6 mm 7 M S Angle 65X65X6 mm 8 11 KV Pin Insulator Polymer Composit (5 KN) 9 11 KV Strain hardware (T&C type) fittings 10 11 KV(45KN) Composite Polymer Disc Insulators 11 G.I. Wire 3.15 mm. (10 SWG) 12 M.S.Flat 50x6 mm 13 Red oxide paint 14 Aluminium paint 15 Back filling of poles with boulders. 16 Carpet guarding 17 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 18 Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole 19 Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) 20 Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) 21 Danger Boards Enamelled 11 KV 22 Danger Boards Enamelled 33 KV 23 M.S.Nuts with Bolts 24 Jointing Sleeves suitable for Dog (100Sq.mm.Al. Eq. ) AAAC conductor 25 Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor 26 Aluminium Binding wire and tape 27 Stay Insulators 90X65mm 28 MS strain plate 65x8mm 250mm long 29 STAY WIRE 7/4.00 MM.(7/8 SWG) 30 Stay set complete without Stay wire 16 mm. (Painted) 31 Stay set 20 mm. complete without Stay wire (Painted) 32 Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay 33 Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay 34 Concreting of structures & foundation (1:3:6) 35 Stone Block/Pre cast block for base pedding(450X450X75MM) 36 Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 37 Labour Charges & all Fabrication Charges (STC Sub Division will provide the raw material like M.S. angle, M.S. Channel, M.S. flat, etc. to the contractor and the contractor will fabricate the itemslike V-cross arm, Top clamp, D.C. Channel, clamp, etc. as per site condition. Those fabrication charges are included in the Labour charges.) no extra amount will be paid. 38 Transportation Charges for All Equipments & Materialsfrom area store to site & Site to Area store Bhopal 39 GST on Transportation @5% 40 GST on (Contractor side Material + Labour) @18%