|
| 1 | Excavation in foundation in ordinary soil including lift upto 1.50M and lead upto 30M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal & disposal of surplus earth as directed by E/I upto a distance of 30M from foundation trenches. SI .251a |
| 2 | Concrete with 4cm guage stone ballast,course sandand cement in proportion of 1:5:10 in foundation and under hoorsing all material, labour, T&P etc. required for proper completion of work. including cost of binding wire (SOR No 274 |
| 3 | R.C.C. workwith cement, approved coarse sand & 2cm gauge approved stone girt in proportion of1:1.5:3 in slab exluding supply of reinforcement and its bending, but including its fixing & binding the same with 24 B.W.G.G.I. binding wire & including necessary centering and shuttering etc. and supply of all material, labour, t&p etc. required for proper completion of the work including cost of binding wire (S.I. NO-284a) |
| 4 | Supplying, Fitting and Placing un-coated HYSD/TMT bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. |
| 5 | M-150 Brick work in1:4 cement & four coarse sandin S/S including supply of allmaterials, labour, Tools & plants etc. required for proper completion of the work. SI-309(a) |
| 6 | 12 mm thick plaster with cement and coarse sandmotar 1:4 over brick work minimum thickness plinth with cement and coarse sand.S.I.no-584(a) |
| 7 | Cement Concrete with 2cm, guage approved stone grit, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, tools & plants etc required for proper completion of the work. SI-279 |
| 8 | M.S. or iron work of small sizes and section such as M.S. Grills / Stair case railing / gates / trusher / racks etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. SI 502a |
| 9 | Painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI Marked. S.I.No-644 |
| 10 | Providing wall puttyon old surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats |
| 11 | Artistic drawing/pinting workon wall with attrative muticolour paint as per direction of Engineer in-charge over and including painting too or more coats with approved supperior quality ready mixed paint over one coat of ready mixed priming paint including supply of all materials labour T&P etc. required for proper completion of the work. |
| 12 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 |
| 13 | Providing and laying of interlocking concrete Block pavement having thickness 80 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) |
| 14 | Supplying, fixing and keeping in position benches (3 seater each) as per design and drawing complete and as per instruction and approval of Engineer incharge.(MR) |
| 15 | SWING: 2 Seater Supply, erection, testing and commissioning 2 Seater Swing (TPS03- SW) Dimension 4.6x1.6x0.8m or Equivalent with ISI Approved . The cost includes all petty material to complete in all respect as desired by engineer in charge. |
| 16 | SLIDE: Double Slide Providing and Fixing Double Slide Multiplay System (TPS-03-MP) Dimension 4x3.2x3 (13.3x10.5x9.8ft) or Equivalent with ISI Approved are made of MS structure with Fiber Slides. The cost includes all petty material to complete in all respect as desired by engineer in charge. |
| 17 | Providing and fixing of M.S. informatory sign board with frame of 40X40X5mm angle iron and diagonal braces of 25X5mm flat iron. 16 S.W. gauge M.S. Sheet shall be fixed on the M.S. Frame including one coat of ready mixed priming paint and two coats of apporved superior quality ready mixed paint on the whole structure and also painting letters on M.S. Sheet firmly fixed to the ground with 15 grade cement concrete 45X45X60cm B.G.L. Complete as per approved drawing and direction of Engineer-in-charge. (A.R.) |
