|
| 1 | Earth work in excavation for roadway, including trimming bottom and side slopes in accordance with requirement of line, grades and cross sections, including disposal of surplus material with all lift and lead upto 1000 metre as per MoRT&H specification clause 301. In all type of soil |
| 2 | Carriage of Materials by mechanical transport including loading, unloading and stacking:: Earth (upto 1Km) |
| 3 | PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 mix with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.) |
| 4 | Providing and fixing precast cement concrete M-20 grade (Using mechanical Concrete Mixer) kerb stone top and bottom width 115 and 165 mm respectively, 250 mm high on 150 mm thick PCC M-10 grade foundation as per design, including fixing at site as per clause 408 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. |
| 5 | Brick work with modular bricks of class designation 75 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level upto plinth level in cement mortar 1:6 (1) cement: 6 coarse sand). |
| 6 | Supply and fixing ashlar lintels and Dassa exposed horizontal and vertical faces 3-lines fine dressed (bearing bed & top surface made perfectly even) (a) upto 15 cm thick Red Ashlar |
| 7 | Cement plastering including T&P, scaffolding, material and complete labour including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mox including Providing/mixing of synthetic fibers compulsorily complying with I5 16481. 2022 of 06 mm/12 mm length to be mixed 0.25% by weight of Cement le 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/ mortar 32 3.3 1.6 (1 cement: 6 fine/coarse sand) |
| 8 | 52 mm thick cement concrete flooring with concrete hardener topping under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume hardening compound is mixed @ 2 litre per 50 kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete, including Providing/mixing of synthetic fibers compulsarily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/mortar |
| 9 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 10 | Providing and Erecting typical Citizens information board as per approved drawing and specifications of MoRD, made of two M.S. sheet of 1.6mm thick each of size 900 mm x 750mm stiffened by angel iron 25mm x 25mm x 3mm all around the plate and plates fixed on frame of 75mm dia pipe of 12 SWG sheet (vertical post 3050 mm with angle holdfasts and horizontal member 900mm) to be joined by 5mm thick MS plate at 12 places (65mm x 50 mm) duly embedded in C.C. M-15 Gr. of block of 600mm x 600mm x 750mm size below ground level as per enclosed drawings & as directed by Engineering-in-Charge. All MS will be stove enamelled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per MoRD Specification |
| 11 | Providing and fixing of precast concrete interlocking files of desired shape of M 30 grade manufactured from fully computerized automatic stationery hydraulic vibrio pressed machine and fully computerized automatic batching plant of class A1/A2 as per BS 6717.2001. The CC Interlocking paving blocks be laid on average 50mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer in charge. The rates to be inclusive of all lead & Lifts etc. complete as per specifications. Tensile splitting strength, abrasion and braking load etc. as per BS 6717:2001, Grey cement. 80 MM |
