Tender For Work Of Muktidham Development In Village Ramkheda - Excavation of soil up to 1.5 m depth in foundation, trench, drain, tamping the bottom, pouring water, grooming the sides, removing the excavated soil, filling the empty spaces with soil again after filling the foundation and disposing of the remaining soil up to a distance of 50 meters in hard, clay, gravel soil2 Cement Concrete 1 Cement : 4 Gravel and 8 Ballast / 1 Cement, 3 Gravel and 6 Ballast including laying of 40 mm nominal size stone in the foundation, tamping and tamping etc. 1:4:8 (i) If 40 mm crusher broken stone aggregate is used instead of hand broken gravel, the same quantity will be payable but the rate of gravel will be reduced by 30%. (ii) If vibrator and mixture are not used, a 3% reduction will be made.3. Laying of stones in the foundation and plinth in cement-gravel mixture, including closing of side cracks and leveling etc. Cement-gravel 1:64. Laying of first grade dry slab brick floor on 12 mm thick mud mixture, filling the joints with mud and then filling it on top with flat tip cement 1:3. Stacked Bricks5 Supply and casting of reinforced cement concrete in 1:2:4/1:1.5:3 mix, including burying, troweling and leveling of the surface with 1:3 cement mortar for roof slabs, eaves, beams, lintels, etc., but including steel and shuttering costs separately. Ratio 1:1.5:36 Supply and cutting, bending, setting and fastening of iron for RCC work.7 Centering (shuttering and sloping) for laying RCC ceilings, slabs, balconies, lintels, etc. Shuttering ply up to 4.5 meters in height and removal, etc., as per specifications.8 Supply of 15 cm high stones for dry trenching under the floor and complete trenching.9 Cement plastering on walls using a mixture of cement and gravel in a 1:6 ratio, including scuffing of joints and regular curing for 14 days. 20 mm.10 Cement plastering on walls using a mixture of cement and gravel in a 1:6 ratio, including scuffing of joints and regular curing for 14 days. 12 mm.11 Whitewashing in 3 layers to give an even shade on new/old work.12 0.80 mm thickness (22 gauge) Supply and installation of 1000mm steel corrugated sheets fitted with steel J or L hooks and 8mm diameter bolts and nuts, and bitumen washers (complete job). This does not include the cost of scissors and purlins. For an analysis shed size of 18.3m x 9.1m = 184cm, 54 sheets measuring 2.5 x 0.9m (121.5cm) and 54 sheets measuring 2.8x0.9m (136.08cm) = 257.58 sqm.13 Iron work for grills/gates, etc., including cutting, mounting, and installation of flat cones, tees, and corrugated (channels).14 Site cleaning, uprooting of roots, stems, vegetation, shrubs, trees, and saplings with 15cm-thick stems, and Removal of debris, etc.15 Laying and supplying quarry gravel containing 40% stone spalls or kankar or ghadla, sprinkling water and tamping with a mortar.16 Laying, spreading, and compacting gravel, kankar, quarry gravel, and coarse aggregate to a thickness of less than 15 cm (without tamping) with a roller weighing 8-10 tons, tamping, and all costs, including water charges and hire charges for tools and machinery, on the prescribed camber and grade of the road.17 Cement Concrete: 1 cement, 4 gravel and 8 stone aggregates / 1 cement, 3 gravel and 6 stone aggregates. Laying, tamping, and compacting of 40 mm nominal size stone in the foundation, including tamping and compacting, etc.1:3:6 (i) If hand-broken gravel is used in place of 40 mm crusher broken stone aggregate, the same quantity will be payable but the rate of aggregate will be reduced. A deduction of 30% will be made. (ii) A deduction of 3% will be made if vibrator and mixture are not used.18 Construction of floor/road using interlocking cement concrete blocks (Grade M-30, manufactured from fully computerized automatic stationary hydraulic vibropressed machine and batching plant of class A as per BS 6717:2001) including supply and installation of edge block. In case of non-application of edge block, a deduction of 0.08 cubic meter/running meter of cement concrete 1:1.5:3 will be made. Under edge block of 80 mm thickness, a block made of cement concrete 1:1.5:3 or stone block having thickness of 20 cm, height of 40 cm and the top edge of the block will be rounded. In place of the block, a block of the same size manufactured on-site will also be acceptable. In case of non-application of edge block on-site, the rate of 0.08 cubic meter of cement concrete per running meter will be made. Should be deducted from.
