|
| 1 | DSR/2023/ 2.31 - Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared..(17.60x 0.7418=13.05) |
| 2 | DSR-2023/item no. 2.1.1 - Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift up to 1.5 m, as directed by Engineer-in-Charge: All kinds of soil . rate factor (129.85x0.7418) |
| 3 | 15.43.2/DSR-2023 Dismantling manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer in charge bituminous road 8640.00x0.7418= 317.86 |
| 4 | AR -Construction of Granular sub base by providing close graded material mix plant at OMC, Carriage of mixed material to work site, spreading in uniform layers with mortar grader on prepared surface and compacting with vibratory power roller to achieve the desired density complete as per clouse 401. MORT&H Analysis 3610.33 |
| 5 | AR = Providing, Laying, spreading and compacting graded stone aggregate wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with grader in sub base/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per MORT & H 406 rate 4061.50 |
| 6 | AR - Providing and applying primer coat with RS1grade bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.70 to 1.00 kg/sqm using mechanical means as perper clouse 502 MORT & H 39.71 |
| 7 | AR - Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 505 complete in all respects. 11056.38 |
| 8 | AR - Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. desired compaction as per MORTH specification clause No. 503 rate. 12.11 |
| 9 | AR - Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.2 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects rate. 13128.85 |
| 10 | DSR/2023/16.91.2 - Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.(1091.50x.7418=809.67) |
| 11 | DSR-23/16.62 Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. 827.25x0.7418=554.70 |
| 12 | DSR 13.48.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm 780x0.7418=143.69 |
