|
| 1 | Brick work with 1st class bricks in cement mortar (1:6)(b) In superstructure, ground floor |
| 2 | First Floor,(a) Upto 4th floor |
| 3 | Second Floor,(a) Upto 4th floor |
| 4 | Third Floor,(a) Upto 4th floor |
| 5 | Fourth Floor,(a) Upto 4th floor |
| 6 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar,(c) 15 mm thick plaster |
| 7 | First Floor,(a) Upto 4th floor |
| 8 | Second Floor,(a) Upto 4th floor |
| 9 | Third Floor,(a) Upto 4th floor |
| 10 | Fourth Floor,(a) Upto 4th floor |
| 11 | Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns,wall, facia etc. with 15 mm thick [avg] cement mortar (1:2)including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete. Area of each Granite slab > 0.6 upto 1.0 square metre.[Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m] |
| 12 | First Floor,(a) Upto 4th floor |
| 13 | Second Floor,(a) Upto 4th floor |
| 14 | Third Floor,(a) Upto 4th floor |
| 15 | Fourth Floor,(a) Upto 4th floor |
| 16 | Distribution wiring in 1.1 KV, 3x1.5 sq.mm. single core stranded \"FR\" PVC insulated& unsheathed copper wire (Finolex, Havell’s) in suitable size PVC casing-capping (Pesto/ Precision) or PVC conduitincl.Modular type switch (Legrand) fixed on Modular PVC switch board with top cover plate on wall incl. mending good damages to original finish. i)Av. Run- 12 mtr. |
| 17 | Distribution wiring in3x1.5 sq.mm. single core stranded \"FR\" PVC insulated& unsheathed copper wire (Finolex, Havell’s ) in PVC cashing or conduit pipeall accessories embedded/ surfacein/onwall to 240 V,6A 3/5 pin plugpoint incl. S& F 240 V, 6A , 3/5 pin Modular type Socket & switch ( Legrand ) fixed on Modular GI/PVCswitch boardincl. earth continuity wire with Modular top cover plate flushed in wall incl. mending good damages to original finish. On boardsocket. |
| 18 | Fixing of 9 watt Bulkhead LED surface mounted light fittings on wall/ceiling by screws etc. . |
| 19 | Supply & Fixing 240 V, 2x6 A, 3 pin Modular type plug socket (Legrand ) with2 x6A Modular type switch, without plug top on GI / PVC Modular type switch board withModular top cover plate on wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 20 | Supplying and fixing 63 amp,4 way double door HTPN MCB DBwith IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment and painting . (Make- Legrand ) |
| 21 | Supplying and fixing double-door (2+4) SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(Legrand) |
| 22 | Supplying and fixing 415 V63 A,4 pole MCBon din rail of existing PDB and necessary connection.( Legrand) |
| 23 | S & F. 32 amp, 240V SPN MCB, ‘C’ curve on din rail of existing PDB and necy. connection (Legrand). |
| 24 | S & F. 10-16 amp, 240V SPN MCB, ‘C’ curve on din rail of existing PDBand necy. connection (Legrand). |
| 25 | S and Drawing 1.1 KV single core stranded \"FR\" PVC insulated & unsheathed copper wire (Finolex, Havell’s,RRcable) of the following sizes inthe prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.a) 3x1.5 sq.mmfor Switch board ,6 amp plug socket. |
| 26 | Laying of 3.5 core 25 sqmmcablesafter cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth75 mm in floor/pavement/wall etc. and mending good the damages to original finish incl. removing the rubbish. |
| 27 | S&F of3.5 core 25 Sq. mm compression type gland complete for following XLPE/PVC armoured cables. |
| 28 | Finishing the end of 3.5 core 25 Sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. |
| 29 | Earthing with 80 mm dia. ISI medium GI pipe( TATA MEDIUM)3.64 mm thick x 9mts. long and 1 no 65 mm x 6 mm x 8 mm galvanized ( hot Dip) steel dtrip ( 12 mtr long) 20 mm dia x 125 mm long galvanized bolt, double nut bolt sdouble washers including finishing both ends by making holes etc and supply and 80 mm dia GI pipe protection ( 9 mtr long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 10.95 mtr.***Earth resistanceshould be below 1 ohm. |
| 30 | Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI \"U\" hooksincl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.19 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire. |
| 31 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep ( below Ground level) complete with cemented brick work (1:6) of 25 cm width duly plastered with cement morter ( inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement . GI reducer including drilling of 46 nos 12 mm holes on the GI pipe |
| 32 | Connecting the equipments to earth busbar including S & F. 8 SWG copper solid wire on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. |
| 33 | Connecting the equipments to earth busbar including S & F. 10 SWG copper solid wire on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. |
| 34 | Supplying & fixing ofcopper flatearth busbar450 x35 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes ( 12 nos) on the busbar complete withbrass bolts, nuts, washers, spacing insulators etc. as required. |
| 35 | Supply ofXLPE/ PVC ArmouredAluminium cable (GLOSTER, CRYSTOL, Havells). 1.1 kv grade, 3.5 core ,25 sq mm XLPE/PVCarmoured aluminium cable, |
| 36 | Supply and fixing of 100 x 10mm full threadGI nut bolts with double brass washer. |
| 37 | Supply and fixing of 3/16 mm full threadbrass nut bolts with double brass washer. |
| 38 | Supply of 240 volt, 9watt HEXA 10 W - IP 66 LED Bulk headlight fittings Make- Havell\"sModel- HEXAFT0WLED857SSYMBOPC. Pageno - 62 dt- 01.05.2025 |
