|
| 1 | WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long |
| 2 | IRON STEEL SCRAP (h-beam 9 mtr long ) |
| 3 | ACSR Panther conductor 0.20 sq. inch (200 sq.mm Al.Eq.) |
| 4 | AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) |
| 5 | Copper Control Cable 2 Core. 2.5 Sq.mm. (Unarmoured) |
| 6 | Copper Control Cable 4 Core. 2.5 Sq.mm. (Unarmoured) |
| 7 | Copper Control Cable 8 Core. 2.5 Sq.mm. (Unarmoured) |
| 8 | Copper Control Cable 2.5 Sq.MM 10 Core(Unarmoured) |
| 9 | G.I. Wire 3.15 mm. (10 SWG) |
| 10 | M S Channel 100X50x6 mm |
| 11 | M S Angle 65X65X6 mm |
| 12 | 11 KV Pin Insulator Polymer Composit (5 KN) |
| 13 | 33 KV (45KN) Composite Polymer Disc Insulators |
| 14 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 15 | 11 KV Strain hardware (T&C type) fittings |
| 16 | 11 KV.C.Ts.(Outdoor dry type) 300-150/5-5 Amps |
| 17 | 11 KV Single Phase PTs. (Resin Molded) |
| 18 | 11 KV VCB, Outdoor Porcelain clad type with complete structure and accessories excluding CT & pannel |
| 19 | 11 KV control & relay panel with numerical static relay for double feeder protection |
| 20 | 11 KV, ISOLATOR 800 AMP. WITH INSULATOR, W/O EARTH SWITCH TP GANG OPERATED |
| 21 | 11 KV Composite Polymer AB Switch Horizontal Movement type |
| 22 | 3 phase 4 wire 3x63.5 volts lb=5 amps Imax = 10 amp, HT trivector meter class of accuracy 0.5s, DLMS Compliant category A Meters along with GSM (GPRS compatible ) modems (For substation metering) |
| 23 | 9 KV Gapless type(5 KA) polymer lightening arrestor |
| 24 | M.S.Angle 50x50x6 mm |
| 25 | M S FLAT 65X8 mm |
| 26 | Red oxide paint |
| 27 | Aluminium paint |
| 28 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 29 | M.S.Nuts with Bolts |
| 30 | Jointing Sleeves suitable for Dog (100Sq.mm.Al. Eq. ) AAAC conductor |
| 31 | Aluminium Binding wire and tape |
| 32 | MS strain plate 65x8mm 250mm long |
| 33 | Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) |
| 34 | Danger Boards Enamelled 11 KV |
| 35 | Danger Boards Enamelled 33 KV |
| 36 | Erection of Plinth per VCB- 33KV or 11KV |
| 37 | Stringing of Each 11 KV Bus-upper and lower bus including, drop jumpering and jointing with clamps,through outgoing VCB/ ME/ DP, upto station transformer |
| 38 | STAY GI WIRE 7/4.00 MM.(7/8 SWG) |
| 39 | Concreting of foundation of VCB (1:3:6) @ 3.5 cmt per VCB plinth |
| 40 | Stay set 20 mm. complete without Stay wire (Painted) |
| 41 | Concreting of structures & foundation (1:3:6) |
| 42 | Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay |
| 43 | G.I.Pipe 40 mm Dia C grade type |
| 44 | G.I. STRIP 25X3 MM1 |
| 45 | Galvanized nut & bolt with washer |
| 46 | 33 KV composite polymer Strain set with hard ware suitable for Panther Conductor |
| 47 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 48 | Bentonite compound powder |
| 49 | Marshelling box with 10 no. connectors |
| 50 | T CLAMP FOR 33KV & 11KV BUS, SUBSTATION upto DOG |
| 51 | SHEET METAL METER BOX SUITABLE FOR H.T. STATIC TRAVECTOR METERS WITH TTB |
| 52 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 53 | Additional Erection Charge1 |
| 54 | Labour Charges & all Fabrication Charges (STC Sub Division will provide the raw material like M.S. angle, M.S. Channel, M.S. flat, etc. to the contractor and the contractor will fabricate the itemslike V-cross arm, Top clamp, D.C. Channel, clamp, etc. as per site condition. Those fabrication charges are included in the Labour charges.) no extra amount will be paid. |
| 55 | Transportation Charges for All Equipments & Materialsfrom area store to site & Site to Area store Bhopal |
| 56 | GST on Transportation @5% |
| 57 | GST on (Contractor side Material + Labour) @18% |
