|
| 1 | H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-15 mtr. Long =565.5 kg |
| 2 | WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long |
| 3 | (v) ACSR Dog conductor 0.10 sq. inch (100 sq.mm. Al.Eq.), (6/4.72 + 7/1.57 mm) |
| 4 | 33 KV (45KN) Composite Polymer Disc Insulators |
| 5 | 33KV(104.98 SQMM )AL-59 ACS XLPE Covered Conductors as per EN:50397,P-1:2020, SS 4240813,SS 4240814,IEC 1232 WITH 95⁰C CONTINUOUS OPERATINGTEMPERATURE of ACS class 20S A /Grade A extruded seme conducting Material,with MVCC Accessories (1KM Cond.) |
| 6 | 33 KV (90KN) Composite Polymer Disc Insulator suitable for Panther Conductor |
| 7 | 33 KV Composite Polymer AB Switch |
| 8 | 33 KV Porcelain Lightening arrestor Gapless type |
| 9 | 33 KV Strain hardware (T&C type) fittings |
| 10 | 33 KV Strain hardware (T&C type) fittings suitable for Panther |
| 11 | 33 KV Pin Insulator Polymer Composite (10 KN) |
| 12 | Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) |
| 13 | Horizontal & Cross Bracing set of MS angle of 50X50X6 mm for 5 ft(1.5 mtr) centre DP |
| 14 | Danger Boards Enamelled 33 KV |
| 15 | M S Channel 100X50x6 mm |
| 16 | M S Channel 75X40x6 mm |
| 17 | MS strain plate 65x8mm 250mm long |
| 18 | Red oxide paint |
| 19 | Aluminium paint |
| 20 | M.S.Nuts with Bolts |
| 21 | STAY GI WIRE 7/4.00 MM.(7/8 SWG) |
| 22 | Stay set 20 mm. complete without Stay wire (Painted) |
| 23 | Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) |
| 24 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 25 | Concreting of structures & foundation (1:3:6) |
| 26 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 27 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 28 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 29 | Additional Erection Charge |
| 30 | Labour Charges & all Fabrication Charges (STC Sub Division will provide the raw material like M.S. angle, M.S. Channel, M.S. flat, etc. to the contractor and the contractor will fabricate the itemslike V-cross arm, Top clamp, D.C. Channel, clamp, etc. as per site condition. Those fabrication charges are included in the Labour charges.) no extra amount will be paid. |
| 31 | Transportation Charges for All Equipments & Materialsfrom area store to site & Site to Area store Bhopal |
| 32 | GST on Transportation @5% |
| 33 | GST on (Contractor side Material + Labour) @18% |
