|
| 1 | Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 2 | Material and labour for rendering 15mm thick in cement mortar (1:4) on otherthan fair faces of Brick walls or concrete surfaces, including mixing of liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. (Note :- WPC shall be measured & paid separately as Supply only) |
| 3 | Supply only liquid water proofing compound complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | Material and labour for rendering 5mm thick in cement mortar (1:3) on concrete surfaceof ceiling, finished fair, even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. |
| 5 | Material and labour forrendering 10mm thick in cement mortar (1:6) on fair faces of Brick walls or concrete surfaces, finishing the surface fair and even complete all as specified and as directed by the Engineer-in-Charge. |
| 6 | Material and labour for Preparation ofnew plastered Internal wall surface by sand papering or by any other mean and after preparing the surfaces applying the following complete all as specified and as directed by Engineer-in-charge:-(a)Applying Wall care putty 1.5mm thick in two layers on complete surface and smoothening the surfcae with sand papers / by Mechanical method (hand electric grinder) prepatory to paint as directed. (b)Two coats of distemper oil emulsion (exterior) of approved tint/shade (Company Depot Tinted) over a coat of primer (exterior) by using paint Roller. |
| 7 | Material and labourfor preparing new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. |
| 8 | Material and labour for preparing new plastered surfaces of walls and applying two coats of cement base painton plastered surfaces, complete all as specified and directed. |
| 9 | Dismantlingfloorhearthorwalltilingincludingcementmortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 10 | Material and labour for joint free non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed bedding layer in CM 1:6, complete all as specified and directed. |
| 11 | Material and labour for Non skid coloured Ceramic tiles 7 to 8mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over 10mm thickrenderingCM (1:4) completeall as specified. complete all as specified. |
| 12 | Material and labour for glazed ceramic coloured tiles in vertical surfaces such as skirting, dados and riser to steps etc size 250mmx350mmx7mm /450mmx350mmx7mmthick set and jointed in neat cement slurry and pointed in white or colourcement to match laid over including 10mm thickrenderingCM (1:4), complete all as specified and directed. |
| 13 | Material and labour for light shade virified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles including 15mm thick screed in cement mortar (1:6) as in floors etc,complete all as specified and directed. |
| 14 | Material and labour for light shade virified ceramic tiles 10mm thick (square/ rectangular) polished, as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over 10mm thickrenderingCM 1:4,complete all as specified and directed. |
| 15 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointedin any mortar complete all as specified and directed. |
| 16 | Material and labour for 15-16 mm thick baroda green marble, machine cut as in shelves/ steps/ cills /jambs /skirting /border and the like works and flooring etc,including bull-nose the front length, set and jointed in cement slurry over & including15mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing, complete all as specified and directed. |
| 17 | Supply & Fix in repairs vitreous china wash hand basin white flat back of size 630x450mm including brackets including waste pipe etc, complete all as specified and directed by Enge-in-Charge. |
| 18 | Supply & fixed in repairs 32mm Waste pipe fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed. |
| 19 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) areanot exceeding 1.50 sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and asdirected by Engineer-in- charge. |
| 20 | Taking down shutters only of any description area exceeding 1.00 sqm and not exceeding 2.00 sqm each and removing from site complete all as specified and asdirected by Engineer-in- charge. |
| 21 | Supply & fixing factory made gauged and skeleton shutter 35mm thick made out of 2nd class hard wood kiln seasoned and chemically pressure treated, open rebated and prepared to receive glass, gauze, etc., but divided into squares, with plain chamfered or rounded, mitred and rebated sash bars, any numbers, fitted with cut and mitred beads for securing glass, gauze etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a);complete all as specified and as directed by Engineer-in- charge.Note: Glass gauze shall be measured and paid tor separately |
| 22 | Supply and fixing factory made flush shutters 30mm thick ply construction, BWP confirming to IS 2202, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match, complete all as specified and directed. |
| 23 | Supply & fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified including powder coating (minimum thicknesss of powder coating 50 micron), complete all as specified and directed. |
| 24 | Supply & fixing forpowder coated anodised aluminium window and ventilator shutter, side hung type without sash, aluminium sections weighing 0.55kg/m incl necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc., complete all as specified and directed. |
| 25 | Supply and fixing solid PVC door frame of size 50mm x 47mm made out 5mm thick plain clour PVC sheetreinforced with MS square tube including painting of edges to match with sheet, all as specified & shown in relevant drawing of item No. 8095 in MES Schedule SSR-2020 (Part-II), fixed in opening B13 complete all as specified and as directed by the Engineer-in-Charge. |
| 26 | Supply & Fix 30mm thick factory made moulded PVC door (Wood free) consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles as well as top, bottom & lock rail. M.S. frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick multi-chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5 mmthick moulded PVC sheet of density 600 kg/cbm with 2, 4, 6 raised panel deign in plain / prelam colours after routing the moulded design on one side of the inside panel. 5 mm plain / prelam PVC sheet to be pasted using solvent cement / cynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton made by sticking 2 nos. foam PVC sheets of 5 mm thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of Plain/Prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 nos.) thick PVC sheet to be given for lock provison at lock height complete as per manufacturer’s, complete all as specified and as directed by Engineer-in-Charge |
| 27 | Supply and fixing for butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 28 | Supply & fix for 150mm aluminium handles, cast type, anodised, complete all as specified and directed. |
| 29 | Supply & fix 150mm long aluminium, anodized, barrel tower bolts of extruded section, complete all as specified and directed. |
| 30 | Supply and fix Galvanised mild steel wire cloth thickness 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed. |
| 31 | Supply & fix in repair galvanised mildsteelwire cloth,0.56mm nominal dia ofwire and averagewidth of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples,complete all as specified and directed. |
| 32 | Supply & fix in repair 3mm thick sheet glass ordinary quality and glazing with oil putty/screws/nailsin squares not exc 0.5 sqm in each pane including hacking out old glass, complete all as specified and directed. |
| 33 | Supply only 3.0 mm thick figured glass, pinched type or with oil putty/screws/nailsin squares not exc 0.5 sqm each pane, complete all as specified and directed. |
| 34 | Supply and fix in repair3.0 mm thick figured glass , oilputty/ pinched type in squares not exc 0.5 sqm each pane including hacking out old glass, complete all as specified and directed. |
| 35 | Supply & fix 150mm Aluminium alloy , anodised , sliding door bolt with hasp , staple (bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium, alloy and fixed, complete all as specified and directed. |
| 36 | Supply & fix Floor door stopper of aluminium alloy body and tongue and 150 mm overall length of cover plate, anodised, with hard drawn steel spring , fixed in floor, complete all as specified and directed. |
| 37 | Supply & fix for 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate fixed, complete all as specified and directed. |
| 38 | Supply & fix in repairs300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate fixed, complete all as specified and directed. |
| 39 | Material and labour for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 40 | Supply & fix in repair 15mm bib tap standard of PTMT whitecolour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed. |
| 41 | TakingupordownGI tubing withallconnectionsandfittingsof 15mmboreincludingcleaningforrefixingorremovaltostore, complete all as specified and as directed by Engineer-in-Charge. |
| 42 | Supply and fixing for galvanized iron water tubing, ‘medium grade’ 15mm bore, with allfittingssuchasbend,tee,unionetc.,fixedcompletetowalls and ceilings or laid in floors,complete all as specified and directed. |
| 43 | Refixing old steel tubing of 15mm bore and connections in new or oldposition(Walls,ceiling,floorsetc.),completeallasspecified and directed. |
| 44 | TakingupordownGI tubing withallconnectionsandfittingsof 20mmboreincludingcleaningforrefixingorremovaltostore, complete all as specified and as directed by Engineer-in-Charge. |
| 45 | Supply and fixing for galvanized iron water tubing, ‘medium grade’ 20mm bore, with allfittingssuchasbend,tee,unionetc.,fixedcompletetowalls and ceilings or laid in floors,complete all as specified and directed. |
| 46 | Refixing old steel tubing of 20mm bore and connections in new or oldposition(Walls,ceiling,floorsetc.),completeallasspecified and directed. |
| 47 | Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any positionincluding removing rubbish material from building and thrown in low lying empty areafrom the site, complete all as specified and as directed by Engineer-in-Charge. |
| 48 | Material and labour plain cement concrete 1:7:12 mix, type E-2 (using 40mm graded aggregate) as in filling of sunken portion, complete all as specified and directed. |
| 49 | Material and labour 15mm thick in cement mortar 1:3 , mixed with water proofing compound, on brick or concrete surfaces of wall of sunken portion, toweled to even and smooth finish without using extra cement with WPC paid and measured separately, complete all as specified and directed. |
| 50 | Supply and fixing for galvanized iron water tubing, ‘medium grade’ 25mm bore, with allfittingssuchasbend,tee,unionetc.,fixedcompletetowalls and ceilings or laid in floors,complete all as specified and directed. |
| 51 | Supply and fixing in replacement vitreous China squatting pan \"Orissa\" pattern white of size 580mmx440mm white with integral foot rests, excluding flushing cistern, flush pipe above floor but including setting the trap and pan in lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, including PVC flush pipe upto finished floor level, joints of flush pipe and trap make leakproof and testing upto entire satisfaction of Engineer-in-charge before filling concrete including 600mm long body P trapcomplete all as specified and as directed by Engineer-in- charge. |
| 52 | Supply & fix in repair Vitreous China Urinals, half stalltype ( back wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, includingPVC flush pipe, grating, waste coupling and union for discharge pipe, waste pipe, CP spreader etc, complete all as specified and directed. |
| 53 | Supply & fix vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and including plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including jet spray, complete all as specified and directed. |
| 54 | Supply and fixinginrepairs,PVCvalveless,dualtype,syphonicactiontype flushingcistern,10litrescapacity,plungertype,lowlevel,white with inlet, ball valve, float , 32 mm dia PVC long bend flush pipe 90cm long, complete all as directed and specified by Engr-in-charge. |
| 55 | Supply & fix PVC(HDPE) SWR , 40 mm bore, single socketed in any length with rubber ring joints using solvent cement as per maunfacture instruction,including all fitting elbow, tees, sockets, bends etc. laidin wallSupply & fixloors for connecting bottle traps & nahani trap, complete all as directed and specified by Engr-in-charge. |
| 56 | Material and labour for cast iron nahani/floor/multifloor trap 100mm dia including jointing with solvent cement in repair fixed in cement concrete (1:2:4) type B1 complete all as specified and directed. |
| 57 | Supply & fix in repair cast iron soil, waste and vent pipe,100mm bore, sand castin any length, with or without ears, with lead joints, fixed to walls/laid in floors and making necessary connections,complete all as specified and directed. |
| 58 | Supply & fix CI Bends (any radius), for 100mm bore CI piipes diminishing pieces or tapers (larger bore measured) fitted with oval access doors, complete all as specified and directed. |
| 59 | Supply & fix in repair cast iron junction combination \"T\" equal or unequalfor 100mm bore with access door, complete all as specified and directed. |
| 60 | Supply & fix in repair cast iron cowls of 100 mm dia, complete all as specified and directed. |
| 61 | Supply & fix in repair CI gully traps, Centrifugal type 150 x 150mm size , square or roundmouthed, type \"P\" or \"S\", complete all as specified and directed. |
| 62 | Supply & fixing in replacement stainless steel sink with drainageboard made out of 1.00mm thick sheet , kitchen or laboratory withplugs, washers, waste coupling, waste pipe 800mm long, includingbedding in cement mortar to dwarf wall or fixing cast iron cantilever brackets and connecting union to waste pipe; overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mmcomplete all as specified and directed by Engineer-in-Charge. |
| 63 | Material and labour in repairfor wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connectinglegs & wall flanges, inlets suitable for 15mm bore connections, complete all as specified and directed. |
| 64 | Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified and directed. |
| 65 | Material and labour plain fillets as in 2nd class hard wood square rectangular in section wrought secured with screws sectional area exc 6 but not exc 13 Sqcm. complete all as specified and directed. |
| 66 | Material and labour Prelaminated particle board,18/19 mm thcik both side interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed. |
| 67 | Supply & fix Piano/continuous hinge of size 40mm (when open) stainless steel, complete all as specified and directed. |
| 68 | Supply & fix in repair harrision rail stainlesssteel tubing of 25 mm dia chromium plated 1.6 mm wall thickness as in curtain rod complete incl Supply & fix 02 Nos stainless steel brackets fency type, stops etc, complete all as specified and directed.Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered. |
| 69 | Supply & fix 125mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 70 | Supply & fix Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge. |
