Tender For Extension Works For Capital Dcw Works In Veppadai Subdivision In Pallipalayam Division; 1 Extension works 2 Excavation of pole pit upto 27 (8.0 m) Pole by using JCB 3 Excavation of pole pit for 30 RCC Pole/9.00m PSC Pole by using JCB or manual 4 Excavation of RSJ pole pit above 36 by using JCB or manual 5 Stay pit 4.5 to 5 depth by using JCB or manual 6 Erection of PSC/RCC poles upto 8.0m. (27) by using Crane or manual 7 Erection of PSC/RCC poles upto 9.14m.(30) by using Crane or maual 8 Erection of RSJ poles above 36-0 by using Crane or maual 9 Erection of stay set complete 10 Fixing of HT V cross arms(all types) / channel cross arms/ guarding Cross arms 11 Fixing of LT 3 phase cross arms 12 Fixing of LT Single phase cross arms 13 Fixing of HT/LT TI Fittings 14 Fixing of HT pin Insulators 22 KV 15 Fixing of HT 22 KV strain disc. 16 Fixing of LT pin Insulator 17 Fixing of LT shackle 18 Fixing of Aluminium Knob 19 Paving and Stringing of 7/4.09 mm ACSR 20 Paving and Stringing of 7/3.35 mm ACSR 7/3.0 mm AAAC 21 Paving and stringing of 7/2.59 mm/ ACSR 7/2.11 mm ACSR 22 ERECTION ofDouble Pole TRANSFORMER STRUCTURE COMPLETE inclusive of following works - Excavation of pole pits sizing 2 X 2 X 6, erection of poles, erection of base plate, erection of structure materials , erection of AB switch and HG Fuse, Structure Earthing complete , Pole concreting (2x26) for both base and sleeve including supply of jelly, sand and cement by the contractor , plinth erection with plastering ratio 1:2 including supply of cement and sand , Fixing of Open Type fuse units, HT/LT LAS fixing and LAS earthing through PVC Pipe 0.5 , Provision of bus-bar arrangement, Erection of Stay Set complete, Jumpering, erection of support angles and insulators if any , Alteration of materials in lathe works if any, provision of danger board, 3 Nos Earth pits including erection of cement collar , painting of metal parts, including loading, unloading, transportation of all required materials from stores to site , Road site to pit spot as per the directions by the TANGEDCO Site Engineer (This includes labour for loading, unloading, transporting and rent for crane lorry, all T&P suchas crowbars, siling, DShackle etc., that must be brought 23 ERECTION of HVDS COMPLETE inclusive of following works - Excavation of pole pits sizing 2 X 2 X 6, erection of poles, erection of base plate, erection of structure materials , erection of AB switch and HG Fuse, Structure Earthing complete , Pole concreting (2 x 2 x 6) for both base and sleeve including supply of jelly, sand and cement by the contractor in the ratio of concreting 1:3:6 , plinth erection with plastering ratio 1:2 including supply of cement and sand , Fixing of Open Type fuse units, HT/LT LAS fixing and LAS earthing through PVC Pipe 0.5 , Provision of bus-bar arrangement, Erection of Stay Set complete, Jumpering, erection of support angles and insulators if any , Alteration of materials in lathe works if any, provision of danger board, 3 Nos Earth pits including erection of cement collar , painting of metal parts, including loading, unloading, transportation of all required materials from stores to site , Road site to pit spot as per the directions by the TANGEDCO Site Engineer (This includes labour for loading, unloading, transporting and rent for crane lorry, all T&P suchas crowbars, siling, DShackle etc., that must be brought 24 Erection of New Transformer all capacities (with jumpering) 25 Loading and Unloading of Transformer up to 100 KVA 26 Loading and Unloading of Transformer100 KVA and up to 200KVA 27 Loading of Poles (Up to 8.0 mtr) 28 Loading of Poles (Up to 9.0 mtr) 29 UnLoading of Poles (Up to 8.0 mtr) 30 UnLoading of Poles (Up to 9.0 mtr) 31 Transport of Materials. Below 8 Kms. 32 Above 8 Kms. For additional Km. 33 Transportation of Poles from road side to pole Pit up to1.0 KM 7.5/8.0m (RCC &PSC Poles) 34 Transportation of Poles from road side to pole Pit up to1.0 KM 9.14m & 9.00 Mtr (RCC&PSC Poles) 35 Drilling of hole in channel only 3/4 & 1 per hole 36 Cutting of flat 37 Cutting of channel 38 Cutting of Angle 39 Dismantling of RCC pole 9.14mtr/RSJ pole 40 Dismantling of RCC/PSG pole 8.0mtr/7.5mtr 41 Dismantling of V X arm,channel X arm,guarding X arm (all types) 42 Dismantling of LT 3 phase X arm 43 Dismantling of LT single phase X arm 44 Dismantling of HT/LT TI fitting 45 Dismantling of 11KV strain disc 46 Dismantling of 22KV pin insulator 47 Dismantling of LT shackle 48 Dismantling of LT pin insulator 49 Dismantling of Aluminium knob 50 Erection of street light service 51 Releasing of Single phase service & Refixing 52 Releasing of Three phase service & Refixing 53 Dismantling of stay set 54 Dismantling of ACSR 7/3.35mm conductor 55 Dismantling of ACSR 7/2.59mm/ 7/2.11mm conductor 56 Dismantling of Bus bar arrangements
