Name of Work: vkuUn fogkj vkoklh; ;kstuk ds CykWd , esa fLFkr nks ikdksZa esa 10 eh0 lseh gkbZ ekLV ykbZV yxk;s tkus dk dk;ZA
Sl. No.
Item Description
1
Supply & fixing of 10 mtr GI Octagonal Pole of approved make (top dia 100mm, Bottom dia 200mm and base plate 16 mm thik) having 3mm thikness with single arm bracket (1 Mtr length) in 1:2:4 RCC foundation including the cost of undation, foundation bolts, excavation & back filling and Required T&P completee in all respect. PWD SOR S.I. No. 649/2018(27920-1238.32 =26681.68)(Rates are Pole street light bracket @ Rs. 1238.32 DSR No. 12.34 / 2022) ( make -Philips/ crompton/ bajaj / utkarsh )
2
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.. PWD SOR S.I. No. 501/2018 (make - gloster, havells / universal / polycab).(a)10 sq. mm 4 core
3
Supply and fixing of factory wired integral LED flood lightluminaires with die cast aluminium housing built with driver set suitable for 170 to 200 watt. Confirming to IP 66 protection complete in all respect. CAT- AAA SOR No 1455.( make - philips/ crompton/ bajaj / Everady)
4
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-incharge.PWD SOR S.I. No. 503/201810 sq. mm
5
Supply and burying of 40mm dia x 4.5 meters long G.I. pipe vertically for earthing having 12 mm dia.holes spaced 75 mm apart drilled up to 2 meter from the bottom complete with earthing lead of No. 6 to 8 SWG GI wire in G.I. pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) up to switch board, 30 cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal / coke and salt at least 150 mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. PWD SOR S.I. No. 701/2018
6
Supply and erection of 600 mm long cross arm of 50 mm x 50mm x 6 mm mild steel angle iron with necessary clamps, bolts, nuts etc. on poles complete in all respects including painting with aluminium paint. PWD SOR S.I. No. 625/2018
7
S/F of Rectanguler 50 x50 x6mm M.S. angle iron and 50x5mm M.S. flate iron pole top bracket for 4 No. flood light. Analysis RatePVR.
8
S/F of 32 Amp. 415 Vmetal clad T.P.N.rewireable type switch fuse unit on angle iron bracket complete in all respects. CAT -B PWD SOR S.I. No. 315/2018(make - L&T / siemens / havells)
9
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. DSR S.I. No. 14.15.1/2022(make - dure line / line duct) 63 mm dia (OD-63 mm & ID-51 mm nominal) @247 X 0.85212=210.47
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
