Name of Work: :iuxj icyk jksM fiy[kqok esa lh0lh0 jksM+ dk fuekZ.k dk;ZA
Sl. No.
Item Description
1
Dismantling sundries work Including stacking of dismantled materials asd directed bty the Engineer-in-charge within a distance of 60 metre (200 feet) SOR-2022 SI NO. 17.01 (691)
2
Excavation in foundation in ordinary soil (Loam, Clay or Sand) including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches. (where machine can not be reach/move) PWD SOR SI NO 251(a)/2022
3
Extra for mechanically compacted to achive 95% proctors density inculding arrangment of water, settlement of all T & P chargess including roler and its fuel charge.
4
Providing & laying spreading and compacting graded stone aggregate to wet mix macadam specification including remixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layer with paver in sub-base/ base coarse on well prepared surface and compacting with vibratory roller to achieve the desired density, MORT&H-406.
5
RCC work in ratio 1:1.5.3 with cement and coarse sand and 200mm stone grit..........................completion of work
6
M-150 Brick work in 1:4 ( 1cement : 4 coarse sand) in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of the work. SOR-2022, 305a
7
12 mm thick plaster with cement and fine sand of 1.25 fineness modules morter in 1:4 over brick work minimum thickness not to be less than 1 cm including supply of all materials, labour, tool and plants etc required for proper completion of work PWD SOR SI NO 584/2022
8
Cement concrete wikth 4 cm (1.1/2) gauge approved stone ballast, approved coarse sand and cement in the proportion of 4:2:1 including supplt of all materials, labour and T&P etc. required for proper completion of the wrok. PWD SOR 279(a)/2022
9
Construction of granular sub-base by providing coarse graded material, spreading in uniform layer with motor grader on prepared surface. mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.MORT&H 401.
10
Supply and fixing of 80 mm thick I shaped rubber moulded cement grey / ordinary red inter locking cement concrete paver blocks confirming IS:15658/2006 of approved shape manufactured by high pressure and control vibration machine having plan dimension 200x(160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The compressive strength of concrete paver block shall not be less than 30 MPa (M-30) including levelling & dressing of surface up to required level and slopes filling joints with local sand including cost of material, labour, T&P required for proper completion of work as directed by E/I and as per approved specifications.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
