|
| 1 | EXCAVATION infoundation inordinary Soil ( Loam, clay or sand ) including lift upto 1.5m and lead upto 30mand including filling wateringand rammingof excavated earth into the trenches or into the space between the building and thesides offoundation trenches or into the plinth and removal& disposal of surplus earthas directed by the Engineer-In-Charge upto a distanceof 30 m.from foundation trenches by hydraulic excavator/manual means. For building/drain work only |
| 2 | Providing and laying cement concrete in 1:4:8 (1 Cement : 4 Coarse sand : 8 graded stone aggregate 40 mm nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work. in Foundation and floors. |
| 3 | Providing & Laying in positionspecified grade of reinforced cement concrete, with 1:1.5:3 (1 Cement :1.5 Coarse Sand : 3 graded stone aggregate 20mm nominal size) including the cost of centering, shuttering, finishing and excluding reinforcement . All work upto plinth level |
| 4 | R C C work in Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. Including the cost of centering shuttering, finishing and excluding reinforcement .1:1.5:3 (1 Cement :1.5 Coarse Sand : 3 graded stone aggregate 20mm nominal size) upto plinth level |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level |
| 6 | Construction of sub grade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table no, 300-2 Carted earth 8 km. As per MORTH Specification 305/SI No 3.18 |
| 7 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. DSR-2023 SI No 13.80 |
| 8 | Providing & Laying in positionspecified grade of reinforced cement concrete, with 1:1.5:3 (1 Cement :1.5 Coarse Sand : 3 graded stone aggregate 20mm nominal size) including the cost of centering, shuttering, finishing and excluding reinforcement . All work upto plinth level SI No 5.1.2 (a) UPPWD SOR 2022 FOOTING |
| 9 | R C C work in Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. Including the cost of centering, shuttering, finishing and excluding reinforcement .1:1.5:3 (1 Cement :1.5 Coarse Sand : 3 graded stone aggregate 20mm nominal size)above plinth level upto fifth floor level SI No 5.2.2 (a) UPPWD SOR 2022 (COLUMN) |
| 10 | R C C work in Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. Including the cost of centering, shuttering, finishing and excluding reinforcement .1:1.5:3 (1 Cement :1.5 Coarse Sand : 3 graded stone aggregate 20mm nominal size)above plinth level upto fifth floor level SI No 5.2.2 (a) UPPWD SOR 2022BEAM |
| 11 | Brick work with common burnt clay F.P.S (non modular) bricks of class designation -100 cement mortar (1:4 Cement and Coarse sand) in Super structure.above plinth level upto fifth floor level. UPPWD SOR 2022SI no 6.4.1 page 30 |
| 12 | 12mm thick cement plasteron brick work with cement mortar of mix (upto 10m height from ground level) in 1:4 (1 cement:4 Coarse sand) UPPWD SOR 2022 SI no 584 (ii)page 55 |
| 13 | 15mm thick cement plasteron rough side of single or halfbrick wall with cement mortar of mix (upto 10m height from ground level) in 1:4 (1 cement:4 Coarse sand) UPPWD SOR 2022 2 New (ii)page 55 |
| 14 | Finishing walls with acrylic smooth exteriorpaint (Apex) of required shade: New work (2 or more coat applied @ 1.67litre per 10 sqm over and including priming coat of exterior primer applied @ 2.20kg per 10 sqm) UPPWD SOR 2022 SI No 21new Page 63 |
| 15 | Mild Steel iron grill, balcony & staircase railing of a approved quality and drawing including supply of all materials, fabrication, labour, T&P in all respect as per direction of Engineer-In-Charge for proper completion of work at site.SI No.16 New UPPWD SOR-2022 |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade of two or more coats on old work including priming coat with ready mix red oxide zinc chromate primer of approved brand and manufacture on galvanized iron/ steelwork including cost of all materials, labour T&P etc. complete required for proper completion of the work. SI no (2New+3New)(33+80)=113 Page 61 |
| 17 | Construction ofGranular Sub Base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to acheive the desired density, complete As per MORTH Specification 401/SI No 4.1 |
| 18 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with grader in sub-base/ base coarse on well prepared surface and compacting with vibratory roller to achieve the desired density. As per MORTH Specification 406/SI No 4.14 |
| 19 | Providing and applying Primer coat with SS2 Grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg per sqm withmechanincal means. As per MORTH Specification 502/SI No 5.01 |
| 20 | Providing , laying and rolling of open - graded premix surfacing of 20mm thickness composed of 13.2mm to 5.6mm aggregates using viscocity grade bitumen to required line , grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hotmix plant of appropriate capacity not less than 200 tonnes/ hour, laying and rolling with a smooth wheeled roller finished to required level and grades. MORTH SpecificationNo - 510 SI No 5.07 |
| 21 | Providing and laying of premix sand seal coat (Type-B) with HMP of approved capacity not less 200 tonnes/hours using crushed stone chipping 6.7 mm size and penetration bitumen of suitable grade as per clause 511 SI No 5.09 |
