Tender For Repair And Maintenance Work Of Community Toilet At W.No.13 Anna Nagar In Kangeyam Municipality
Tender Value
2.10 Lakhs
Estimated cost
Bid Submission
30 Sep 2025
0 days left
EMD
2100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kangeyam → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Maintenance Work Of Community Toilet At W.No.13 Anna Nagar In Kangeyam Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Removing the damaged Indian Water Closet including all labour charges etc, complete complying with standard specification. |
| 2 | Supplying and fixing in position best quality approved make colour glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications |
| 3 | Plastering with cement mortar 1:3 mix (One cement and three crushed stone sand) to 10 mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification |
| 4 | Plastering with cement mortar 1:5 mix (One cement and five crushed stone sand ) to 12 mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification |
| 5 | Supplying and fixing in position colour Glazed European Water Closet of best quality and approved make with 100mm \"P\" os \"S\"\" trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 12.5 litres PVC Low Level Flushing Tank with all internal fittings etc., complete complying with standard spoecifications,labor inclusive of fixing lowlevel flushing tank. |
| 6 | Supplying and fixing 30mm thick solid core PVC door shutter with PVC frame (Confirming to IS 4020 with updated amendments) consisting of frame made out of MS tubes 19 gauge thickness and size of 19 x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C\" channel of size 30 x 50mm forming styles, and 5mm thick 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2) thick 20mm wide cross PVC sheet as gap insert for top rail, bottom rail.Paneling of 5mm thick PVC sheet bearing on either side and join together other side etc. An additional 5mm thick PVC strip of 20mm width is to be stack and the interior side of the ‘C\" channel using PVC sealant adhesive complete, as per direction of Engineer in charge and drawing. |
| 7 | Supplying and fixing steel door single leaf made out of 18 gauge M.S. sheet frame 35 mm x 35 mm x 5mm angle M.S. flat 25 x 5 mm with aldrop tower bolts 2 nos. two handles and size hold fasts complete welded and revitted and one coat of red oxide painting including cost of all materials and labour charges etc., |
| 8 | Painting two coats with best approved quality of enamel paint over one coat of priming for new iron work including all labour charges etc., complete as per standard specification |
| 9 | Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC.unsheathed Cu. Conductor of 1100 V grade in Suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colourful open PVC light point / fan point (For electronic regulator)(5 points per coil). |
| 10 | Supply and Fixing of 18W LED Bulb with Holder including cost of material, conveyance and all labour charges etc., complete as per standard specification. |
| 11 | Supply and fixing of 4\"36 W single box type flu. fitting complete with copper choke and condensor with TW round block on wall or ceiling with flu. tube with PVC unsheathed leads from terminals to the fitting (SD-87) |
| 12 | Supply and Fixing of Water Bucket including cost of material, conveyance, Labour charges etc., complete as per standard specification. |
| 13 | Supply and Fixing of Mug including cost of material, conveyance, Labour charges etc., complete as per standard specification. |
| 14 | Supply and Fixing of 110mm dia PVC 6 KSC Pipe including cost of material, conveyance, Labour charges etc., complete as per standard specification. |
| 15 | GST 18% |
AI Tender Summary
Tender Timeline
Sep 29, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 30, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender