Tender For Beautification Work Of Kanpur Entry Road On Kalpi Road At Panki Bhau Singh. - Earth work In excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not axceeding 1.5 m in wldth or 10 sqm on plan), includng dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soll and disposal of surplus excavated soil as directed, within a lead of 50 m. Ali kind of soil. 2.81. 3 Excavating, supplying and filling of local earth by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. 2.25 4 Supplying and filling in plirith with sand under floors, including 3 watering, ramming, consolidating and dressing complete. SOR CH-4/2.27 5 Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site.spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 GSB SENCTION RATE 6 1:3:6 (1 Cement: 3 coarse sand (zone-III) derived from natural 5 sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources) 7 Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level Up to floor V level inall shapes and sizes in 1:4 Cement & coarse sand 8 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) CH-13/13.51. 9 Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering. finishing and reinforcement - All work up to plinth level: 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone. aggregate 20 mm nomina size de rived from natural sources) CH-5/5.1.2 10 Centering and shuttering including strutting, propping etc, and removal of form for Foundations, footings, bases of columns, etc. for mass concreteCH-5.9.1 11 Steel reinforcement for R.C.C. work Including straightening, cutting. bending, placing in position and 10 binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more CH- 5.22.6 12 Steel work welded in bullt up sections/framed work. Including cutting, holsting, fixing in position 11 and applying a priming coat of approved steel primer using structural steel etc. as required, in gratings, frames, guard bar, ladder, rangs brackets.cates and similar Works 13 Providing and fixing 4 MM THK ACP 12 SHEET ON STRUCTURAL FRAM WITH ANY COLOR, COMPLETE AS PER 14 Painting wiin synthetic encme Jpaint of approved brand and 13 manufacture to give an even shade Two or more coats on new work 15 Taking out existing CC Interlocking paver blocks from footpath/central verge, including removal of rubbish etc., disposal of unserviceable material to the 14 dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. SOR CH-16/19/16.87 16 Providing & Laying 150x150 mm with thickness ranging from 70-90mm rough finish granite cobbles stone and shape of approved and complete as per direction of Engineer-in-Charge, including transport loading unloading and 15 conveyance of Grey cobbles granite from available source lo work site, including labor charges for fixing the granite and pointing etc., all complete as per direction of Engineer-in-charge. LDA SR 17 Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished,machine cut for kitchen platforms,vanity counters, window sills, facias size, approved shade, colour and texture laid over 20 mm thick base cement morfor 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, cuning 18 INAUGRATION STONE GRANITE SIZE WITHING WRITUP 750X600 MM ALONG WITH BRICK PEDESTAL (MR) 19 Finishing walls with textured exterior paint of required shade New work (Two or more coats applled @3.28 (tr/10 sqm) over and including 18 priming coat of exterior primer applied 2:20kg/10 sqm 20 Supply of 3.0 mm MS sheet with CNC cutting work Design as per drawing (MR) QUATIOTION 21 Supply & fixing of Acrylic Sheet Letter OF KANPUR IN HINDI (2 M HIGH) & 1 M SEHAR IN HINDI LED LETTERS (MR)QUATIOTION 22 Supply & fixing of Acrylic Sheet 21 Letter OF KDA LOGO (1 M HIGH) (MR) QUATIOTION 23 Supply & fixing of Acrylic Sheet Letter OFHUMARE NAYAK HUMARE VEER (1 M HIGH) (MR) QUATIOTION 24 Supply & fixing of 3D STONE PANEL WITH CNC CUTTING & FIXING IN LAYER TO SHOW 3D EFFECTS. COMPLETE AS PER DESIGN (MR) QUATIOTION 25 Providing and fixing dry cladding upto 10 metre height with 30 mm thick gang saw cut stone with machine cut edges of uniform colour and size upto Imxim, fixed to structural steel frame work and/or with the help of cramps, cns etc, and sealing the joints with approved weather sealant as per Architectural drawing and 24 direction of Engineer-in-charge. The steel frame work, stainless steel cramps and pins etc, shall be pald for separately), Red sand stone work for wall lining etc. 30 mm thick saw cut stone (ANALYSIS RATE) 26 Providing and fixing expandable fasteners of specified size with necessary 25 plastic sleeves and galvanised M.S. screws including drilling holes in masonry work/CC./Analysis Rate 27 Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at 26 suitable location, including making necessary recesses in stone siab, drilling required holes etc complete as per direction of the Engineer-in-charge. 28 Providing and fixing stone jall 40 mm thick throughout in cement mortar 1:3 (1 cement: 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement: 2 stone dust) 27 with an admixture of pigment. matching the stone shade, jali sicb without any chamfers etc. 29 ABSTRACT-HORTICULTURE 30 Earthwork in excavation over areas (30 cm in depth) including disposal of excavated earth lead upto 50m and lift upto 1.5m disposed earth to be 31 Supplying & filling/ spreading gardenloam soil upto 300mm in depth. 32 Cleaning, clearing the stonechips & unwanted materials,dweeding, and 33 Supplying & planting korean/ mexican grass by dibbling method including supply and mixing manners, waterring 34 Supplying & planting korean grass by turfing method including preparation of base, supply and mixing manures, 35 Supplying & planting doob grass by dibbling method including supply and mixing manners, waterring DRS-2.35 36 FERTILIZER 37 Supply and mixing of D.A.P(@0.07/plant) including, loading unloading cartage all 38 Supply and mixing of Neem Cake (@1kg/plant) including, loading cartageall 39 Supply and mixinJg of M.O.P. (@0.03kg/plant) including, loading 40 Supplying & planting different types of flowering trees (Height of tree - 8-10, at the time of plantation)including pit making & supply mixing and spreading of good earth and manuring, watering. (Tree varities: Plumeria 41 Supplying & planting Palms tree (Cycas revoluta) (width-approx. 1½ at the time of plantation) including pit making & supply mixing and spreading of good earth and manure, watering. 42 Supplying & planting matured Date Palms tree(phoenix dactylifera) including pit making & supply mixing Land spreading of good earth and DSR BALUDHYAN 43 Supplying and planting Weeping debdaru [Polyalthia longifolia, ht- 6-7] including pit making & supply, mixing, spreading of good earth and DSR BALUDHYAN 44 Supplying & planting different types of bamboos (heights 8-10) including pit making, supply, mixing and spreading of good earth and manure, watering etc Varieties of bamboo: a) Bambusa vulgaris, b) Bambusa ventricosa. DSR BALUDHYAN 45 Supplying & planting different types of foliage & flowering shrubs-height-2-3 (a. phyllanthus myrtifolius, b. Jatropha pandurifolia) including pit making, supply,mixing and spreading of good earth and manure, watering etc. DSR BALUDHYAN 46 Supplying & planting different types of colourful edge plants/ground covers(a.Cymbopogon citratus, b. kalanchoe) including pit making. supply, mixing and spreading of good earth and manure, watering etc. DSR BALUDHYAN 47 Supplying and planting flowering creepers including pit making, supply, mixing and spreading of good earth and manure, watering ete. DSR BALUDHYAN 48 Supplying & planting full matured ornamental trees (height-10-12) (Terminalia mantaly, Plumeria obtusa/Each alba, plumeria rubra) including pit making, Supply, mixing and 49 ABSTRACT -STREET LIGHTING WORK 50 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 51 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (CH-2/216) 52 Supply &fixing of 50 watt LED Spot light with water proof housing Die cost complete with Suitable Capicity diver set (make philips)Quatition by 53 Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect. CAT-AAA 54 ABSTRACT -FOUNTAIN WORK 55 Molding work of granite stone including labor T&P etc. all complete. As per quatition 56 Installation, testing & commissioning & connection with Gangajal pipe line. As per quatition 57 Supply & fixing 7.5HP pump of I.S.I marked all complete. As per quatition 58 Water Proof Lights- Programmable color changing led based nozzle mounted36watt 12 LED-36watt Luminaries comprise of . 12 Volt X 36 W waterproof fixed lights (of approvedmake Aquarius). Overall height of light body shall be 173 mm outer Diaand innerdia 50mm and Height 65mm. Luminaries shall have die cast Alumnium with powder coated with stainless steel top bodies with heat fused epoxy/polyester all over coating.All fasteners shall be of stainless steel. Mounting bracket shall be stainless steel . Imported coloured LED(Choice of colour from Red,Green & Blue) shall be mounted in between sandwich of Three layer Water proofing pieces of Polyglass of 150 mm dia each sealed by a high quality elastomer Silicon gasket. LED Bulb shall be reflector Lens Fitted in holder. To prevent ingress of water the waterproof luminaries shall have a Brass cable gland that compensates for variations in cable diameter both initially and ongoing due to factors such as temperature variation and ageing. Wiring shall be 4 core double insulated PVC flexible with variation and ageing.. Waterproof luminaries shall be waterproof when fully immersed in water per rating IP68 and shall have been tested All in pool connections shall be fully waterproof.height -65mm this light are 100% shockproof modal-Aquarius/Stainless Steel /PC36w/00116B-UW-IP68 Body-Aluminum with powder coated with stainless steel 304 top Make-Aquarius Color-FRGB Life-95000hr. As per quatition 59 Supply and fixing of light pannel & Submersible pannel ISI mark etc. all complete. As per quatition 60 Nozles & Rings - Small Forty FoamingJet Nozzle Size 20/25 /100 Body- StainlessSteel 316 Water Effect height 9ft Make-Aquarius 61 Nozles & Rings - Center medium cluster jet NozzleBody- Steel with Brass Nozzle with chrome plaited Water Effect height 8ft to 10ft Make-Aquarius 62 Nozles & Rings - Swing Joint for moving Nozzle position Size-40mm Body- Stainless Steel 316 Make-Aquarius 63 Nozles & Rings - Supplying and fixing of 2.5”GI Ringmade anchored in pond Bottom the half ring shall be 15.f Dia..running . With1” dia socket 11nos. welded on it 4nos 63 mm dia inlet welded on othersided for distribution of water toring including banding, threading/fixing /welding etc. completeall fixing to be doneas perdirection ,instruction and entire Satisfaction of engineer of in charge 64 Plumbing- Complete plumbing required in fountain . for the fountain in GI pipeincluding welding + necessary Brass control valves. Supply and fixing of 40 mm dia OD size 4” longof Stainless steel 304 Nipple 18Nos. Supply and fixing of 40 mm dia OD size 5” longof Stainless steel 304 NippleSupply and fixing of 100 mm dia GI pipe with rated pressure of 6 kg/sq cm duly ISI Marked for branching with all accessories like elbow tee sockets and including cutting jointing complete as required Supply and fixing of40 mm diaGI pipe with rated pressure of 10 kg/sq cm duly ISI Marked for branching with all accessories like elbow tee sockets and including cutting jointing complete as required 65 Supply and fixing of 40mm dia Gunmetalball Valve with accessories complete as required. Make-/ Precious Straina /sant/zolotoequivalent 66 Supply and fixing of 50mm dia Gunmetal ball Valve with accessories complete as required. Make-Precious/ Straina /sant/zoloto equivalent 67 Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: ch-14/14.18
